Compare signal quality for data/address lines between CPC700 and SDRAM according ... is found replace it on QM boards, run test procedure, make new assessment; ...
Change SDRAM CLOCK series resistors from 61.9 Ohm to 24 Ohm ... of PLL chips output to provide SDRAM CLK. Move SDRAM CLK track to layer5 (shield with Ground) ...
Almost all parts are ready for flight acceptance test except JSBC and new JBUX. After JSBC is ready, we will test one FM set first for AMS-02 integration. ...
2.3 Case C: One tenth value of the gap ... 3. Discussion and Summary ... This value is far below the allowable temperature 105 as shown in the data sheet. ...
A. Kounine, MIT. S. Xu, MIT. A. Koulemzine, MIT. Y.H. Chang, NCU Taiwan. C.H. Lin, NCU Taiwan ... Bz become significant at both side walls. By is always small. ...
... (Alexei has a lot of such program to be modified for the new system) ... ROM Monitor is frozen, used for JLV1 FM, TDR QM; S-crate HW is on the critical path. ...