PowerPoint Presentation - Telerobotics - PowerPoint PPT Presentation

About This Presentation
Title:

PowerPoint Presentation - Telerobotics

Description:

Title: PowerPoint Presentation - Telerobotics Author: rrrr Last modified by: Roberto Oboe Created Date: 2/6/2001 9:22:18 AM Document presentation format – PowerPoint PPT presentation

Number of Views:120
Avg rating:3.0/5.0
Slides: 43
Provided by: rrrr
Category:

less

Transcript and Presenter's Notes

Title: PowerPoint Presentation - Telerobotics


1
Integration of Internet and real time control
systems in telerobotics
2
Introduction
  • Many devices are today accessible through
    Internet
  • Web cams
  • Washing machines, coffee pots and other
    appliances
  • Robots
  • The term control is referred to the possibility
    of sending a list of commands to the remote device

3
Introduction
  • Note
  • The control loop is not closed across the network
  • The remote equipment executes the commands under
    the supervision of its own local controller
  • Why?
  • The unpredictable performance does not allow the
    realization of an Internet-based, real-time
    control system, in which the control loop is
    closed across the network

4
Introduction
  • Question
  • If the characteristics of the Internet connection
    in use are known, is it possible to implement a
    real-time, closed-loop control system,
    integrating that connection?
  • Answer
  • JBIT Java Based Interface for Telerobotics a
    telerobotics equipment for real-time
    teleoperation over Internet, with visual and
    force feedback

5
Introduction
  • Closing the loop across Internet

6
Summary
  • Internet modeling
  • Delays, losses and bandwidth
  • Control of dynamic systems with variable
    time-delay
  • Solutions available in literature
  • Packet loss handling
  • The JBIT project

7
Internet modeling
  • Internet can be considered as a strongly
    connected network of computers, communicating
    with each other using packetswitched protocols

8
Internet modeling
  • From source to destination, each packet traverses
    several nodes
  • Each node has different throughput, routing
    policy, and buffering and queues management
  • Each node handles many other data flows, this
    resulting in random service time

9
Internet modeling
  • When the data flow between end users exceeds the
    available bandwidth, congestion occurs
  • The available (or marginal) bandwidth for a
    single user depends on the data flow generated by
    other users, sharing the same physical connection

10
Internet modeling
  • End-to-end connection modeled by
  • Average delay
  • Available throughput
  • Delay statistics/variations
  • Packet loss statistics
  • Simple experiments to get the model
  • ICMP packet injection and Round Trip Time (RTT)
    measurement

11
Internet modeling
  • RTT vs. Time

Short term Long Term (1 week)
12
Internet modeling
  • RTT distribution
  • Depends on the number of nodes traversed
  • 10000 km connection
  • 30 km connection

17 hops
5 hops
13
Internet modeling
  • RTT distribution

10000 km
30 km
Exponential-like Gaussian-like
14
Internet modeling
  • RTT phase plots (RTTn1 vs. RTTn)

rttnk1 rttnk P/? - ?
Non-congested Congested
Note P is the packet length, ? is the channel
throughput, ? is the period of the probing packet
15
Internet modeling
  • Available bandwidth can be obtained by injecting
    a data flow that brings the connection close to
    saturation.
  • The closer to saturation, the higher the packet
    loss rate

16
Internet modeling - Summary
  • Available bandwidth, average delay, delay
    deviation and loss rate can be easily obtained
    with simple injection of probing packets
  • Saturation can be avoided by setting the upper
    limit of the application throughput below the
    available BW

17
Control over Internet
  • Closing the loop across Internet

18
Control over Internet
  • Few solutions available in literature for
    time-varying delay
  • All algorithms are designed on the basis of
    maximum delay and its max. derivative
  • Structural constraints
  • With Internet, short interruptions may occur
  • Decentralized control is preferred
  • In case of interruptions, it must be allowed to
    have reduced perfomance

19
Control over Internet
  • Other solution provide a pair of queues to even
    out the delay jitter
  • In this case, all constant-delay techniques can
    be applied (e.g. Smith predictor)

20
Control over Internet
  • Which protocol is best suited for Internet-based
    control?
  • TCP Acknowledge mechanism interrupts control
    loop
  • RTP Oriented to audio-video streaming
  • UDP No detection of missing packets
  • Enhanced UDP
  • Packet loss detection and time stamping

21
Control over Internet
  • Other problem random packet losses
  • Losses may be single or burst (more than one
    packet lost sequentially)
  • Burst losses occur if the data rate is over the
    maximum available BW
  • Data flow must be adapted to operating conditions
  • Monitoring of available bandwidth through RTT
    on-line measurement

22
Control over Internet
  • Single losses can be handled with a predictor
  • The prediction is used instead of the missing
    data
  • This works in conjunction with the buffering
    mechanism and a packet loss detection procedure
  • Based on E-UDP features

23
Control over Internet - Summary
  • Not all applications are suitable for IP-based
    control
  • The application must survive even in case of
    long interruptions
  • Decentralized control must be allowed
  • Monitoring of connection characteristics and
    adaptation of the controller to operating
    conditions
  • Data recovery must be provided

24
Case study Telerobotics
Bi-directional data exchange
25
Case study Telerobotics
  • This application is well suited for IP-based
    control
  • Decentralized structure
  • Several control algorithms for constant time
    delay are available

s
26
Telerobotics at the Industrial Electronics Lab.
  • Research started in 1995
  • Biorobotics Lab. UW Seattle
  • Telerobotics Group Jet Propulsion Laboratory
  • LVR - Università di Orleans-Bourges
  • Design and realization of an Internet-based
    telerobotic equipment with force feedback
  • Enanched-UDP
  • JBIT
  • P_at_dus - OTELO

27
Web-based telerobotic systems
  • Several systems are available
  • None allow real time feedback and control
  • CGI interface and script-like commands
  • Connection is open when the query is sent and
    closed upon reply arrival
  • no continuous video streaming
  • e-mail or updated environment picture as feedback

28
JBIT Java-Based Interface for Telerobotics
  • Targets
  • to enable any Internet user to access a remote
    robot, with real time video, VR and (possibly)
    force feedback
  • low cost (overall!)
  • no special tools (SW HW)

29
JBIT solutions - 1
  • Cost
  • Freeware
  • Low cost camera (Quickcam)
  • Commercial force display (Microsoft Side Winder
    Pro) as master
  • Direct-drive, low cost robot as slave
    (cannibalized from HDDs)
  • Sensorless force feedback

30
JBIT solutions - 2
  • Real-time visual and force feedback
  • Java servlets for fast server response
  • compressed video streaming (H.263) for video
  • VR-based interface to improve the visual feedback
    performance
  • coordinating force feedback queuing data
    recovery to cope with IP delays and losses

31
Structure of JBIT system
32
JBIT Client-server structure
33
JBIT Client-server structure
  • Server (implemented with Java servlets)
  • Waiting for client requests
  • Access control, timeout
  • Data exchange between client and robot (no direct
    access form client to robot)
  • Video encoding (H.263) and streaming
  • Monitoring of available bandwidth
  • Adaptation of video and control output rate

34
JBIT Client-server structure
  • Client (implements user interface)
  • Communication with servlets
  • Selection of operating mode
  • Radio button and active joystick interface
  • VR interface
  • Video decoding and playing (Java Media Framework
    - JMF)

35
Client interface
36
JBIT - Force feedback
  • Up to 200 Hz sampling rate on a LAN, 50 Hz with a
    14.4 kbps modem

37
JBIT - Force feedback
  • Perception of the remote environment
  • Depends on the connection delay

Remote tracking of a square object
38
Conclusions
  • The realization of an IP-based closed loop
    control system is not a trivial task.
  • Precise knowledge of the connections
    characteristics is needed
  • Such characteristics must be constantly monitored
  • Reconstruction of lost data should be ensured

39
Conclusions
  • Need for some smart strategies to deal with long
    term interruptions
  • Few applications are suitable for IP-based
    control
  • Several issues still to be addressed in order to
    achieve a general solution for IP-based control

40
Conclusions
  • Some help may arrive from new network
    technologies
  • Hard real-time connections (e.g. Tenet)
  • New version of Internet (IPv6)
  • RSVP (Resource Reservation Protocol)
  • New video compression (MPEG4)
  • It will be possible to have connections with
    prescribed Quality of Service (QoS), in terms of
    throughput, losses and delays
  • Reliable control of remote equipment using
    Internet could be implemented more easily.

41
On-going project P_at_dus
PATIENT STATION (SLAVE)
ECHO PROBE
PC
ECHOGRAPH
SLAVE
PATIENT
EXPERT STATION (MASTER)
COMMUNICATIONCHANNEL
PC
HAPTIC MASTER
EXPERT
42
Tele-echographies
Write a Comment
User Comments (0)
About PowerShow.com