TDE600 MPR 2.0

1
Pure IP PBX KX-TDE600 MPR 2.00
Panasonic Communications CO.,LTD.
2

Pure IP-PBX KX-TDE Series
Product Line Up
TDE600 MPR 2.00
TDE100/200 MPR 2.00
TDE100/200 MPR 1.00
Version Main Function TDE100/200 - Peer to Peer
Communication (MPR 1.0) - KX-NT300 Series IP-PT
- SIP Phone Compatible TDE100/200 - KX-TDA0177
(CSLC16) (MPR 2.0) - Improved Built-in SVM2 -
KX-TDA0192/4 (ESVM) - 8 Digits VM Integration -
Support T38 (ITU standard for sending FAX)
TDE600 The same as TDE200 MPR 2.0/TDA600 MPR
5.0 (MPR 2.0) New activation key.
3

KX-TDE600 System Highlights

• ? Build - up system (Flexible system same as
  TDA600)
• Inherent TDA600 MPR 5.0 Features.
• Inherent TDE100 MPR 2.0 Features.
• Easy upgrade from TDA600 to TDE600
• (Change EMPR card to IPCEMPR card)
• ? TDA600 Hardware products compatible with
  TDE600.
• TDE100 Activation keys compatible with TDE600.
• CA (NCP) feature is not supported.
• TDE600 does not support build-in SVM.
• New activation key for TDE600.
• Support KX-NT3xx Series
• Support KX-DT3xx Series
• PA TDE600 supports PA 1.8 only. (Do not use PA
  1.7 or early version.)

4

KX-TDE600 System Highlights
TDE100/200 Series Activation Key
NT136
NT300
VoIP/SIP
Router
TDA 0470
IPCEMPR DSP
DLC DHLC
MPR 2.0
PCMC
NT300
DT300
T7600
TDA600 MPR 5.0 Features TDE100 MPR 2.0 Features
5

KX-TDE600 Shelf
KX-TDE620 Expansion Shelf
KX-TDE600 Basic Shelf
Difference from TDA620 - Front cabinet
Difference from TDA600 - MPR Card - Front cabinet
6
KX-TDE600 Shelf (Build up)
The same concept as the TDA600
KX-TDE620
KX-TDE620
KX-TDE620
KX-TDE620
KX-TDE620
KX-TDE620
KX-TDE600
KX-TDE600
KX-TDE600
KX-TDE600
Entry
Full
Medium-1
Medium-2
7

KX-TDE600 Shelf
The same as the TDA600
4 x Physical Shelf
1 x Virtual Shelf
8

KX-TDE600 Virtual Slot
4 x Virtual Slot Extension
4 x Virtual Slot Trunk
The same as TDE100/200.
Total Max 8 x Virtual Slot
9

KX-TDE600 Max. Slot
TDE600 TDE600 TDE620 x 1 TDE600 TDE620 x 2 TDE600 TDE620 x 3
System Max System Max System Max 18 29 40 51
Trunk Max Trunk Max 14 24 34 40
Physical Slot 10 20 30 40
Virtual Slot 4 4 4 4
Extension Max. Extension Max. 14 24 34 40
Physical Slot 10 20 30 40
Virtual Slot 4 4 4 4
Physical Slot 10 21 32 43
10

KX-TDE600 Terminals (Trunk)
TDE600 TDA600
Trunk Max. Trunk Max. Trunk Max. 640 640
SIP G/W Virtual (MPR) 32 (2 x SIP G/W-16) -
SIP G/W Traditional 0 -
SIP G/W Max. 32 -
H.323 G/W Virtual (MPR) 32 (2 x V-G/W-16) -
H.323 G/W Traditional 640 (40 Slots) 640 (40 Slots)
H.323 G/W Max. 640 640 (40 Slots)
LCOT/BRI Traditional 640 (40 Slots) 640 (40 Slots)
PRI30/E1 Traditional 600 (20 Slots) 600 (20 Slots)
PRI23 Traditional 460 (20 Slots) 460 (20 Slots)
T1 Traditional 480 (20 Slots) 480 (20 Slots)
11

KX-TDE600 Terminals (Trunk)
TDE600 TDE600 TDE620 x1 TDE600 TDE620 x 2 TDE600 TDE620 x 3
Trunk Max. Trunk Max. 192 (1) 352 (2) 512 (3) 640
Virtual Max Virtual Max 32 32 32 32
SIP 32 32 32 32
IP-G/W 32 32 32 32
Traditional Max. Traditional Max. 160 320 480 640
Analogue 160 320 480 640
BRI 160 320 480 640
PRI30/E1 150 300 450 600
PRI23 115 230 345 460
T1 120 240 360 480
IP-G/W 160 320 480 640
(1) 192 160 (BRI x 10) 32 (Virtual) (2) 352
320 (BRI x 20) 32 (Virtual) (3) 512 480 (BRI
x 30) 32 (Virtual)
12

KX-TDE600 Terminals (Extension)
TDE600 TDA600
Extension Max Extension Max 1152 640 TDA0172 x 20 128 SIP (32 x 4 Slot) 384 TDA6178 x 16 Slot 1120
IP-PT (MGCP) Virtual (MPR) 64 (2 x V-IPExt-32) -
IP-PT (MGCP) Traditional 640 (40 Slot) 640 (40 Slot)
IP-PT (MGCP) Max. 672 640
SIP Ext. Virtual (MPR) 128 (4 x V-SIP-32) -
SIP Ext. Traditional 0 -
SIP Ext. Max. 128 -
PT Traditional 640 640
SLT Traditional 960 (40 Slots x SLC24) 960 (40 Slots x SLC24)
PS (w/o MEC / w/ MEC) PS (w/o MEC / w/ MEC) PS (w/o MEC / w/ MEC) 512/512 256/512
13

KX-TDE600 Terminals (Extension)
TDE600 TDE600 TDE620 x1 TDE600 TDE620x 2 TDE600 TDE620x 3
System Max. w/ DXDP System Max. w/ DXDP System Max. w/ DXDP 432 736 1008 1152
w/o DXDP w/o DXDP w/o DXDP 368 608 848 992
Virtual Max Virtual Max Virtual Max 128 128 128 128
SIP SIP 128 128 128 128
IP-PT IP-PT 64 64 64 64
Traditional Max. w/ DXDP Traditional Max. w/ DXDP Traditional Max. w/ DXDP 304 608 880 1120
w/o DXDP w/o DXDP w/o DXDP 240 480 720 960
SLT Max SLT Max 240 480 720 960
PT Max. 256 512 640 640
PT w/ DXDP 256 512 640 640
PT w/o DXDP 160 320 480 640
IP-PT 160 320 480 640
CS 32 64 96 128
PS (w/o MEC/ w/ MEC) 512/512 512/512 512/512 512/512
14

KX-TDE600 Compatibility
- Compatibility with TDA600 option cards.
(Trunk/System)
Card
Card
TDA600
TDE600
Bus-Master (TDA6110)
Yes
Yes
ELCOT-16 (TDA6181)
Master-Sub (TDA6111)
Yes
Yes
E1 (TDA0188)
CID/PAY8 (TDA0189)
EMEC (TDA6105)
No
Yes
CID (COTDA0193)
IPCMEC (TDE0105)
Yes
No
BRI-8 (TDA0288)
PSU-M (TDA0104)
Yes
Yes
BRI-4 (TDA0284)
PSU-L (TDA0103)
Yes
Yes
PRI (TDA0290)
IP-GW4 (TDA0480)
IP-GW4E (TDA0484)
TDE600 does not support. - LCOT-4 (TDA0183) -
LCOT-8 (TDA0180)
IP-GW16E (TDA0490)
15

KX-TDE600 Compatibility
- Compatibility with TDA600 option cards.
(Extension)
Card
TDE600
TDA600
Card
TDA600
TDE600
DHLC-8 (TDA0170)
Remote (TDA0196)
Yes
Yes
Yes
Yes
DLC-8 (TDA0171)
Yes
Yes
OPB-3 (TDA0190)
Yes
Yes
DLC-16 (TDA0172)
Yes
Yes
DPH-4 (TDA0161)
Yes
Yes
SLC-8 (TDA0173)
Yes
Yes
DPH-2 (TDA0162)
Yes
Yes
CSLC-16 (TDA0177)
Yes
Yes
MSG (TDA0191)
Yes
Yes
ESLC-16 (TDA6174)
Yes
Yes
E-SVM-2 (TDA0192)
Yes
Yes
EMSLC-16 (TDA6175)
Yes
Yes
E-SVM-4 (TDA0194)
Yes
Yes
ECMSLC-24 (TDA6178)
Yes
Yes
CS-I/F (TDA0144/0143)
Yes
Yes
TDE600 does not support. - SLC-16 (TDA0174) -
SLC-16 (TDA0175) - ECHO-16 (TDA0166)
Echo-16 (TDA6166)
Yes
Yes
CTI-LINK (TDA0410)
Yes
No (1)
IP-Ext-16 (TDA0470)
Yes
Yes
Ext. CID (TDA0168)
Yes
Yes
1 IPCEMPR Card has the CTI link port.
16

KX-TDE600 Compatibility
- Compatibility with TDE100/200 Activation keys.
Activation key
TDE100
TDE600
New activation keys.
2-IP Trunk (NCS4102)
No (1)
Yes
4-IP Trunk (NCS4104)
Yes
Yes
1-IP Soft-/IP-PT (NCS4201)
No (1)
Yes
8-IP Soft-/IP-PT (NCS4208)
Yes
Yes
1-IP-PT (NCS4501)
No (1)
Yes
8-IP-PT (NCS4508)
Yes
Yes
1-SIP Phone (NCS4701)
No (1)
Yes
16-SIP Phone (NCS4716)
Yes
Yes
Feature Enhancement (NCS4910)
Yes
No
Feature Enhancement (NCS4950)
No
Yes
1 TDE100/200 MPR 2.01 will support.
17

KX-TDE600 Compatibility
- Compatibility with TDE100/200 options.

TDE100
TDE600
DSP-16 (TDE0110)
Yes
Yes
DSP-64 (TDE0111)
Yes
Yes
VoIP Encryption SD card (TDES01)
Yes
No
VoIP Encryption SD card (TDES61)
No
Yes
18

KX-TDE600 Compatibility
- Compatibility with NCP500/1000

NCP
TDE600
All Hardware of TDE600
No
Yes
All Hardware of NCP
Yes
No
All Activation products of TDE600
No
Yes
All Activation products of NCP
Yes
No
19
System Connection TDE600 TDE620
A cable is packed in BUS-M (TDA6110), BUS-M-Sub
(TDA6111)
TDE620/TDA620
TDA620 Software should be 2.000 or later.
TDE620/TDA620
TDE620/TDA620
TDE620/TDA620
Cable
Cable
TDE600
TDE600
TDE600
TDA6110 (BUS-M)
TDA6110 (BUS-M)
Power unit LPR Cards
TDA6111 (BUS-M-Sub)
TDA6111 (BUS-M-Sub)
20
Activation Key
21

Activation Key
- Issuing TDE600 activation key procedure is the
same as TDE100/200.
URL https//eww.netreg.panasonic.co.jp/kms/
22
KX-TDE6101 IPCEMPR KX-TDE0105 IPCMEC
23

KX-TDE600 IPCEMPR (TDE6101)
- KX-TDE6101 MPR card for TDA600. (KX-TDE600
has KX-TDE6101)
Build-in Memory Card

• KX-TDE0105
• Memory Expansion Card for IPCEMPR

24

KX-TDE0105 (IPCMEC) Feature
Items TDE600 MPR 2.0 TDE600 MPR 2.0 TDA600 MPR 5.0 TDA600 MPR 5.0
Items W/o TDE0105 W/TDE0105 W/o MEC W/MEC
4 Party Conference With Broadcasting. Yes Yes No Yes
System Speed Dial 1000/Tenant x 32 1000/Tenant x 32 1000/Tenant 1000/Tenant x 32
Station Speed Dial 100/Ext. Yes Yes No Yes
Hotel-SMDR for check out. 4000 Calls 8000 Calls No 8000 Calls
SDMR buffer 1000 Calls 4000 Calls 1000 Calls 4000 Calls
Quick Dial 8Digit, 4000 entries Yes Yes Yes Yes
Max. Number of PS 512 512 256 512
25

Procedure adding IPCMEC
The procedure detailed below is for your
reference regarding the addition of a IPCMEC card
to a previously installed TDE600.
1. Save the current system data from the TDE to
the SD card 2. Save the current system data from
the SD card to your PC. 3. Power off the TDE and
remove the preinstalled MEC card. 4. Install an
IPCEMEC to the TDE. 5. Power on with initial
initializing steps. 6. Connect the PCMC and
initialize the TDE. 7. Upload the system data to
the TDE.
Important
Note When the preinstalled memory card is
removed, all recorded SMDR data will be lost.
Therefore, it is recommended to output the SMDR
data before removing the preinstalled memory card.
26
TDE600 Software
27

TDE600 Software
TDE600 supports,
TDA600 MPR 5.0 Features. - KX-TDA0158
(8ch-CS) - KX-TDA6178 (24-SLT) - 8 digits VM
integration - KX-TDA0192/4 (ESVM) - Moving From
SVM to DISA - High Quality OGM Record to
ESVM TDE100 MPR 2.0 Feature. - T.38
28

TDE600 Software
Modified/New Functions/Features
Modified/New Functions/Features
1 VM-Group Ext. number can be assigned as transfer re-call destination.
2 Intercept function performs an extension which set call forward to CO.
3 Auto recovery function for Busy-out (Analogue line).
4 Two CLIP on an Extension.
5 Check-OUT not ready mode (Hotel feature) is supported.
6 System error activates an external relay.
7 PRI CNIP with the name of extension.
29

Software Enhancement Plan
TDE600 NCP500 NCP1000 TDA30 TDA100 TDA200 TDA600 TDE100 TDE200
Transfer re-call to VM-Group. 2.0 1.0 (5.0) (5.0) (?) (3.0)
Intercept for Call-FWD to CO. 2.0 1.0 (5.0) (5.0) (?) (3.0)
Busy-out Auto recovery function. 2.0 1.0 (5.0) (5.0) (?) (3.0)
Two CLIP on an Extension. 2.0 (?) (5.0) (5.0) (?) (3.0)
Check-OUT not ready mode. 2.0 1.0 (5.0) (5.0) (?) (3.0)
System error activates an external relay. 2.0 1.0 (5.0) (5.0) (?) (3.0)
PRI CNIP 2.0 1.0 N/A (5.0) (?) (3.0)
( ) Planed MPR version
30
PCMC for TDE600
31

PCMC for TDE600
Please use U-PCMC Ver. 4
32

PCMC for TDE600
Now file
33

PCMC for TDE600
Connect
34
Upgrade TDA/TDE to TDE600
35

Upgrade to TDE600
Update from TDA600 The following items are
necessary for the upgrade
Model/Name Description
KX-TDE6101 (IPCEMPR) IP Convergence Main Processing Card The main processing card for controlling the Pure IP-PBX (KX-TDE600). This card comes with an SD Memory Card and 2 ferrite cores included.
KX-TDE0110 (DSP16) 16-Channel VoIP DSP Card Digital signal processor (DSP) cards to be mounted on the IPCMPR/IPCEMPR card. Depending on the number and the type of IP trunks and IP telephones you wish to use, either the DSP16 or DSP64 card is selected to be installed. Note The following activation keys are pre-installed 4-Channel IP Trunk Activation Key 1 for DSP16 4 for DSP64 8-Channel IP Proprietary Telephone Activation Key 1 for DSP16 4 for DSP64
KX-TDE0111 (DSP64) 64-Channel VoIP DSP Card Digital signal processor (DSP) cards to be mounted on the IPCMPR/IPCEMPR card. Depending on the number and the type of IP trunks and IP telephones you wish to use, either the DSP16 or DSP64 card is selected to be installed. Note The following activation keys are pre-installed 4-Channel IP Trunk Activation Key 1 for DSP16 4 for DSP64 8-Channel IP Proprietary Telephone Activation Key 1 for DSP16 4 for DSP64
36

Upgrade to TDE600
System data converter (By PCMC)
We can upgrade from TDA100/200/600/TDE100/200 to
TDE600. The origin PBX System data is only
versions of TDA100/200 TDA600 (MPR 5.0xxx),
TDE100/200 (MPR 2.0).
TDA600 MPR 5.0 TDE100/200 MPR 2.0
TDE600 System Data
PCMC Data Converter
37

Upgrade to TDE600
Upgrade from TDA100/200 MPR x.x, TDA600 MPR 1.0,
TDE100/200 MPR 1.0 to TDE600.
TDA100/200 MPR x.x TDA600 MPR 3.0 TDE100/200 MPR
1.0
Not Possible
PCMC Data Converter
Data Convert
TDE600 System Data
PCMC Data Converter
TDA600 MPR 5.0 TDE100/200 MPR 2.0
38

Upgrade to TDE600
PCMC data convert conditions

• - SLC16 is converted to ESLC16 automatically.
• - MSLC16 is converted to EMSLC16 automatically.
• - LCOT16 is converted to ELCOT16 automatically.
• The following card has to be removed and the card
  data has to be deleted before system data
  convert.
• - LCOT-4 (TDA0183)
• - LCOT-8 (TDA0180)
• VoIP-4 (TDA0480)
• ECHO-16 (TDA0166)
• CTI Link card (TDA0410)
• Any card in Slot 11

TDE600 requirements
- Card configuration of TDE600 should be same as
TDA/TDE. - If the MEC card is installed in the
TDA, IPCMEC should be install.
39

Upgrade to TDE600
Note
The TDA SD memory card (TDA30/100/200 32M,
TDA60064M) used in the TDA cannot be used TDE600
(128M). The SD memory card contains software for
all the processes of the PBX and all the customer
data. It can be easily removed and taken away
from the PBX by a third party. Therefore, do not
allow un-authorized access to prevent data
leakage. To prevent data leakage, render the SD
Memory Card physically unusable before disposal.
40

Upgrade to TDE600
Data Reset After Upgrade
Incoming Call Log Outgoing Call Log
(including Last Number Redial) Message
Waiting SMDR Advice of Charge (AOC)/Pay
Tone Hospitality guest billing data ICD Group
monitor log for supervisor PBX date and time
Timed Reminder LPR Timed Update time Daily
test start time PT handset/headset volume PT
SP-PHONE volume PT ring volume PT display
contrast ICD Group login status
41

Upgrade to TDE600
ICD Group login status (All extensions are set
to Login by default.) ICD Group Ready/Not Ready
status (All extensions are set to Ready by
default.) Live Call Screening (LCS) On/Off
Hands-free Answerback status Absent Message
status of extensions (Absent Message data itself
is not cleared.) FWD/DND status (FWD
destinations are not cleared.) Extension
Lock/Remote Extension Lock Extension PIN
Lock/Extension PIN Lock counter Verified Code
PIN Lock/Verified Code PIN Lock counter
Password Lock counter for Remote System
Programming PBX Error Log Digital Trunk Error
Report data
42
Upgrade Steps
43

Upgrade to TDE600
1- Back up the current system data. 2- Back up
the current OGM files 3- Open the current system
data by batch mode. 4- Delete the following card
from the system data - LCOT-4 (TDA0183) -
LCOT-8 (TDA0180) - VoIP-4 (TDA0480) - ECHO-16
(TDA0166) - CTI Link card (TDA0410) - Any
card in Slot 11 5- Save the system data.
This steps is operated by the PCMC, but PCC
recommends this step by manually.
44

Upgrade to TDE600
6- Convert the saved system data file for use
with the TDE600.
6.1- Open U-PCMC 4.0.
6.2- Click
6.3- Select PBX - TDA600 ? TDE600 - TDE100/200
? TDE600
6.4- Select By file
6.5- Click Next
45

Upgrade to TDE600
6.6- Select source file (TDA600 MPR 5.0 or
TDE100/200 MPR 2.0) and click OK 6.7- Select
destination file and click OK The source file
is automatically converted the TDE600 system data.
7- Set up a new TDE600, or TDA600 TDA600 Remov
e the current MPR card from the TDA600 and
Install the IPCEMPR Card with either the
DSP16/DSP64 Card mounted, in the TDA600. 8-
Slide the System Initialize Switch to the "SYSTEM
INITIALIZE" position. 9- Turn on the power to the
PBX. 10- Connect the U-PCMC to the TDE600. 11-
Quick set up. 12- Transfer the converted TDE600
data to the TDE by U-PCMC.
46

Upgrade to TDE600
13- Activate the user DGSYS from the PC. Select
Utility - System Reset - Reset by the
Command.
13.1- Select
Important
13.2- Click OK
47

Upgrade to TDE600
Final settings
48
Upgrade Steps (TDA620 to TDE620)
49

Upgrade from TDA620 to TDE620 -1
1- Check the present BUS-S software version.
Should be 2.0xx
50

Upgrade from TDA620 to TDE620 -2
2- Transfer the BUS-S software (2.0xx) to the SD
card.
SD Card - PGMPR 2.0 - DGSYS (2.0 User) - PBUSS 2.0
pbuss_v02xx.bin
MPR.2.0
51

Upgrade from TDA620 to TDE620 -3
3- Set the TDA620 to OUS mode.
Click to OUS
52

Upgrade from TDA620 to TDE620 -4
4- Transfer the BUS-S software (2.0xx) to the
TDA620.
4-1 Select
4-2 Click
4-4 Click
4-3 Select
53

Upgrade from TDA620 to TDE620 -5
4-5 Click
4-6 Click
Present Software version
54

Upgrade from TDA620 to TDE620 -6
4-7 Click
4-8 Click
Click OUS
55

Upgrade from TDA620 to TDE620 -7
4-9 Click
56

Upgrade from TDA620 to TDE620 -8
5- Set the TDA620 to INS mode.
Click to INS
57

Upgrade from TDA620 to TDE620 -9
6- Check the present BUS-S software version.
Should be 2.0xx
58
Thank you very much !
59
Modification from 20080xxxx-01 TDE600 (MPR
2.0).ppt to 2008025-01 TDE600 (MPR 2.0).ppt Add
Page 4, 20-21,34, 49, 50, 69-78 To 20080825-02
TDE600 (MPR 2.0).ppt Modify Page Page 14, 16,
59, 64 To 20080926-01 TDE600 (MPR 2.0).ppt Modify
Page Page, 9 13