Commercialization of an Acoustic Camera - PowerPoint PPT Presentation

1 / 15
About This Presentation
Title:

Commercialization of an Acoustic Camera

Description:

Commercialization of. an Acoustic Camera. Ed Belcher. Bill Hanot. Joe Burch. Sound Metrics Corp. ... The data were collected with the DIDSON Diver Held model ... – PowerPoint PPT presentation

Number of Views:78
Avg rating:3.0/5.0
Slides: 16
Provided by: ronalde1
Category:

less

Transcript and Presenter's Notes

Title: Commercialization of an Acoustic Camera


1
Commercialization of an Acoustic Camera
Ed Belcher Bill Hanot Joe Burch Sound Metrics
Corp.
2
DIDSONDual-Frequency Identification Sonar
3
7.9 ft Shark
A 2.4m (7.9 ft) shark swims in the Oceanopolis
Aquarium in Brest, France. The data were
collected with the DIDSON Diver Held model held
over the top of the aquarium tank wall. Courtesy
of Jean-Yves Cueff, NEOTEK.
4
Deck of Sunken Ship
Changing the tilt of DIDSON, captures the deck or
railing of a sunken ship and fish above the
deck. Taken with Diver-Held DIDSON Diver
Dave Elliott, NOAA
5
Disclaimer
  • This is a discussion on our commercialization
    process. I am not endorsing this process for
    everyone.

6
Before the Beginning
  • At APL we mostly made systems that satisfied the
    sponsor but did not generate much interest
    outside the sponsors specific application.
  • We thought our lens-based sonars could be
    commercialized.
  • We tried to license the technology to an existing
    company.
  • Companies were not interested. One, company,
    said it would accept a license only if we first
    found a buyer for 40 systems.
  • After 15 DIDSONs were sold from APL to a variety
    of users, we decided to try to form our own
    company.
  • We had no promise of purchase from anyone. We
    thought if we started small and only sold 3 to 6
    sonars, we could at least pay off our start-up
    loans.

7
The Steps We Took
  • Stated our intentions to the APL chain of command
  • Learned specific steps from UW Office of
    Technology Licensing.
  • Obtained permission to work outside the UW in a
    area of potential conflict of interest. (forms
    and permissions from Department Head, Director,
    Dean of COFS, and a Vice Provost.
  • Incorporated Sound Metrics
  • Completed negotiations for an exclusive license
    with the UW OTL
  • Teamed with Ocean Marine Industries, Chesapeake,
    VA
  • Mortgaged equity in our homes and established
    lines of credit

8
The Steps We Took
  • Started operations in my basement

9
The Steps We Took
  • Plowed revenues back into the company to build
    more sonars.
  • No SMC salaries were paid in 2003
  • Ed retired in Dec 03, Joe resigned May 04, Bill
    resigned Sept 04
  • From March 2003 to July 2005, we operated in the
    basement of my house.

10
The Steps We Took
  • In July 2005, we moved to a suite (1,900 sqft) in
    an office building at 15029 Bothell Way NE

11
The Steps We Took
12
The Steps We Took
  • DIDSON status through Nov 1, 2006 over 100
    shipped and 7 demo/rental units are in
    operation
  • Our start-up loans are paid off
  • We are getting a salary
  • Number of Employees 3 full-time and 2 part-time.

13
Teaming with an Experienced Partner
  • Ocean Marine Industries, Chesapeake, VA, is
    valuable for selling our products and as a
    business consultant
  • We value their experience
  • Obtaining and tracking customers and closing
    deals
  • Processing Government Contracts, POs
  • Expediting payments
  • They are paid by commission

14
Commodity Jurisdiction
  • APL asked the Department of State for a commodity
    jurisdiction for DIDSON
  • DoS responded and put DIDSON on the U.S.
    Munitions List
  • To ship outside of U.S.A (Canada is an exception)
    we needed an Export License
  • Ocean Marine worked hard for over 2.0 years to
    get us off the USML. We are now off, and go
    through the DoC.
  • Try hard to avoid getting your product on the
    USML.

15
Out-Sourcing, a Type of Leasing
  • How do we make sonars with only 3 full-time and 2
    part-time people? We chose to work with a number
    of companies with needed talent and equipment
    rather than do all the work in-house.
  • Machining Parts
  • Circuit Board Assemblies
  • Array Fabrication and Potting
  • Cable Assemblies
  • Payroll
  • Books Checked and Taxes Prepared by Certified
    Public Accountant
  • Specialists that do needed tasks outside of our
    expertise
  • Sales and Contracts with Customers
  • Rent office and work space
  • There is risk in this approach. You cannot
    easily control the schedules and priorities of
    outside help. So far, we have not been severely
    burned.
Write a Comment
User Comments (0)
About PowerShow.com