Jointer Safety

1
Jointer Safety Operation

• The jointer is used to machine an edge or a
  surface of material before gluing or to finish
  rough stock.

2
Pre-operation Safety

• Before operating, be sure that the blades are
  sharp and not damaged.
• Be sure the hambone guard works properly.

3
Pre-operation Safety

• Before operating make any necessary adjustments
  on the fence.
• The fence can be tilted for angles and can be
  moved back and forth.

4
Pre-operation Safety

• Before operating make adjustment for depth of cut
  using the adjustment wheel and the gauge.
• Max. cut for jointing is 1/8in.
• Max. cut for surfacing is 1/16in.

5
Pre-operation Safety

• Check the fence for security and check that it is
  square.

6
Pre-operation Safety

• Stock to be jointed must be at least 12in. long.
• Stock to be surfaced must be at least 3/8 in.
  thick.

7
Operation Safety

• Never pass your hand over the blade. Step it over
  the blade.
• Use push sticks on smaller pieces and to increase
  safety at all times.
• Maintain a 4in. Safety margin.

8
Operation Safety

• Use a pusher block when surfacing material.
• Material to be surfaced must be at least 3/8 in.
  thick.

9
Final Safety Rules

• Always wear safety glasses or shield when
  operating the jointer.
• Keep your eyes on your work, do not be
  distracted.
• Before making any adjustments to the jointer be
  sure that you have your instructors approval.