PremiSys%20Setup%20Review

1
PremiSys Setup Review

• The following sequence presents the minimum
  configuration necessary to obtain an Access
  Granted in a newly installed PremiSys system.
  Remember, your system settings may differ for
  reader type, card format, controller address,
  etc and not all system settings are covered.
• PremiSys Setup Review ends with trouble-shooting
  tips for fixing the most common card failure
  transactions.
• Our goal is to produce an Access Granting
  transaction.
• Lets begin

2
Contents

• First-Time Users Please press ltEntergt to move
  from start to finish. Press ltBackspacegt at any
  point to back up.
• Returning Users Click a topic name below to
  jump ahead

Go to Access Settings Create 24/7 Time
Zone Activate Card Format Configure Card
Database Add Site Add Channel Add Controller Add
I/O Board Edit Reader Edit Door Set up Access
Group Download Controller Create Card Assign
Card Access Rights Test the Card
Trouble-shooting Tips
3
(No Transcript)
4
(No Transcript)
5
(No Transcript)
6
(No Transcript)
7
(No Transcript)
8
(No Transcript)
9
(No Transcript)
10
(No Transcript)
11
(No Transcript)
12
(No Transcript)
13
(No Transcript)
14
(No Transcript)
15
(No Transcript)
16
(No Transcript)
17
(No Transcript)
18
(No Transcript)
19
(No Transcript)
20
(No Transcript)
21
(No Transcript)
22
(No Transcript)
23
(No Transcript)
24
(No Transcript)
25
(No Transcript)
26
(No Transcript)
27
(No Transcript)
28
(No Transcript)
29
(No Transcript)
30
(No Transcript)
31
(No Transcript)
32
(No Transcript)
33
(No Transcript)
34
(No Transcript)
35
(No Transcript)
36
Download
37
(No Transcript)
38
(No Transcript)
39
(No Transcript)
40
(No Transcript)
41
(No Transcript)
42
(No Transcript)
43
(No Transcript)
44
(No Transcript)
45
(No Transcript)
46
Trouble-shooting Tips

• Host Offline check settings for channel (COM),
  controller, and I/O board
• No transactions at all download (also required
  after system setting changes)
• Reader beeps, but no transactions appear check
  Weigand pulse in reader setup
• Invalid Card Format check card format setup,
  confirm format is assigned to door
• Invalid Site Code check doors card
  format(s), update format w/correct site code
• Card not in Controller assign the card number
  to a cardholder
• Card has no access at anytime assign an
  access group to the card
• Access denied Invalid time check time zone
  and/or access level settings
• Cant find cardholder to update card Go to
  navigator, click , search by name
• Card database error create/modify one and/or
  assign one to the controller
• Wrong lock relay, door position input, and/or RTE
  are associated with the reader Generate Door
  feature assumes the first readers associated
  points are first relay is door lock first
  input is RTE second input is door position. (If
  different, update settings in the Door tab in
  the door setup window.)