Autoobd

1

• AD-1 Auto Scanner

2

• Features

1.Universal
2.Wireless
3.Remote diagnosing
Home
3

• Features

4.Platform Operates on either XP or Vista
operating systems.5. Interface USB
"plug-and-play" technology and high baud
transceiver for faster data transfer.6. Report
Results can be saved and printed for later
reference.7. Upgrading Software can be upgraded
anywhere via internet. 8. Hardware Anti-shock
rubber guards for stronger, more durable
usage.
Home
4

• Configuration

AD-1 Multiplexer
Transceiver
Main Cable
USB Line
Battery Clips
Ignition Lighter Cable
Adaptor
Storage Case
Home
5

• Software Download

AD-1 Client Software
AD-1 USB Driver
Download Page http//www.autoobd.net/english/down
load/download.asp
Home
6

• Software Setup

Install the AD-1 client software.
Home
7

• Main Interface

If use the software at first time, please click
the SETTING buttonand set COM port..
Home
8

• Check COM Port

Check the CP210XUSB COM port fromDevice Manager.
And then set the same com port in the AD-1
software as above.
Home
9

• Wireless Connection

Wireless communication can reach from 20 to 50
meters.
Home
10

• Connection with wire

You may operate the device based on any laptop or
desktop. The diagnostic connectors would be
different due to the vary vehicle.
Home
11

• Diagnose

Select the model of the car you want to
diagnose ( JAPAN TOYOTA )
Home
12

• Diagnose

Select Connector type OBDII-16A
Home
13

• Diagnose

Select the system ( ENGINE )
Home
14

• Diagnose

DIAGNOSE ITEM Diagnostic Trouble Codes
InformationData Stream ListActive Test.
Home
15

• Diagnose

Test result No fault code
Home
16

• Diagnose

Data stream list(Simulation Testing result )
Home
17

• Diagnose

Read ECU Memory(Audi/VW Testing result )
Home
18

• FAQ

What can we do if the system still in wait state?
Home
19

• FAQ

Click RESET back to initial state.
Home
20

• FAQ

It is due to the software com port setting
failed. Go back to thesoftware main page, click
button SETTING, and then selectthe correct
com port. ( You may refer to the USB driver
installation in this manual). If still same
problem, re-plug the USB line and try it again.
Home