Diapositive 1

1
CANLYTE SOLID STATE LIGHTING
Canlyte with Philips, Lightolier SSL, Calculite,
Color Kinetics and Keene LED products is
positioned to be the leading company for SSL
products in the Canadian market
2
Calculite Solid-State Downlighting

• Lightolier Specification Grade White Light LEDs
  for General Illumination

3
LightFair 2009 Award

• Most Innovative Product of the Year
• LFIs Highest Honour
• Recognizes the Best of the Best in Lighting

4
IES Recommended Standards

• Designed Tested to IES Recommended Standards
• IES LM-80
• IES Approved Method for Lumen Depreciation
  Testing of LED Light Sources
• IES LM-79
• IES Approved Method for the Electrical and
  Photometric Measurements of Solid-State Lighting
  Products

5
Lightoliers LED Philosophy

• Develop application-specific solutions
• Take advantage of unique benefits of LEDs
• Provide new Value propositions for our customers
• Create families of products

6
Lightolier SSL System Approach

• Products must not be evaluated based on the rated
  performance of the individual LEDs or other
  components.
• Lightoliers System Approach involves the
  concurrent design of power conversion, LED
  circuits, thermal management and optics.
• This system approach will guarantee that all
  components will deliver optimum performance and
  long life.

7
Lightolier First Introduction to Solid State
Lighting

• Recessed Track Colour Wash Linear
• Recessed Matrix Wall Wash
• Cove Colour White
• Markers
• Task Light

8
Traditional Phosphor Converted LED

• Almost all white LEDs use a royal blue chip
  coated with phosphor
• Difficult to maintain consistent coating
  thickness from chip to chip
• Phosphor emits light in all directions when
  converted
• Up to 60 of the light is reflected backwards
  into the chip
• Back-reflected light absorbed by the chip and
  creates additional heat

White Light
Phosphor Coating
Encapsulant
Absorbed Light
Heat
Blue chip
9
The Challenge of LED Binning

• The performance of each LED is unique
• White LEDs are typically classified as warm
  (2700K-3500K), neutral (3500K-4500K) and cool
  (4500K)
• Each Colour consists of several different bins
• Each LED is binned by three measurements flux
  (output), Colour and forward voltage (power)
• Each manufacturer has different bins

10
LED Colour Consistency

• In any array, you will have a mixture of LEDs
  with varying flux and Colour
• LEDs also exhibit Colour shift over life which
  increases with higher junction temperatures
• To achieve uniformity, you need to mix the light
  from the different LEDs together using a mixing
  chamber and/or optics

11
Elements of the Calculite Remote Phosphor
Technology
Heat sink
Calculite 4 trim
Royal Blue Led Array
Mixing Chamber
Phosphor and glass lens assembly
12
Calculite LED Array

• Royal Blue LED emitters are mounted on a metal
  clad printed circuit board (PCB) in an array
• Metal core PCBs conduct heat better due to lower
  thermal resistance.

13
LED Array

• Calculite 20W LED board 16 LEDs in series (8
  for 10W)
• Array is connected to the drive circuit with a
  locking modular plug

14
Calculite Mixing Chamber

• Back-reflected light is redirected out of the
  luminaire by highly reflective chamber

15
Calculite Remote Phosphor

• The phosphor is exposed to less heat
• Increasing conversion efficiency
• Uniform emitting surface
• No visibility of individual LEDs

16
The Solution Calculite Remote Phosphor

• Remote phosphor approach
• Increases efficiency by up to 20
• 50,000 hour life (L70)
• Designed Tested to IES Recommended Standards
• LM-80-08
• IESNA Approved Method For Measuring Lumen
  Depreciation of LED Light Sources

17
Calculite Phosphor and Glass Lens Assembly

• Phosphor film is available in 3000k and 4000k
  Colour temperatures
• Soon available in 2700k and 3500k
• Film is bonded to glass lens
• Glass lens held onto mixing chamber with a metal
  ring
• Assembly wet location approved

18
Colour Temperature

• Remote Phosphor Technology convert Blue LED light
  to an architecturally preferred 80 CRI
• 3000K Colour temperature results in a system
  efficacy of 50 lumens per watt
• 4000K Colour temperature results in a 10
  increase in light level

19
Calculite Optics

• Designed with Calculite Comfort Optics
• Delivers true 50º physical and reflected cutoff
• Reduced aperture brightness

20
Calculite Heat Sink

• Heat Sink Shape provides increased surface area
  due to curved fins this improves the rate of heat
  transfer
• Overhanging fins helpful in spreading heat and
  natural convection
• Black paint has the highest coefficient of
  radiation. Helps radiative heat transfer.
• Calculite SSL heat management provides high
  system performance

21
Thermal Design Approach

• Use of aluminum spun reflector as part of
  integral heat sink (patent pending)
• Reflector is attached to the front side of the
  metal core PCB
• Heat conducted from the PCB to the reflector
• The ambient on the reflector side is cooler than
  the plenum side which helps thermal dissipation
  by natural chimney affect

22
6 Performance in a 4 Aperture
6 inch Vertical lamp
6 inch Horizontal lamp
4 inch

• Calculite remote phosphor has
• Higher driver efficiency and lower initial power
• Higher optical efficiency
• Better lamp maintenance

23
Project Comparison CFL to LED

• Calculite 20W LED downlight compared to a 26W CFL
  
• Equal illuminance
• Lighting power density reduction
• 1.1 W/SF to 0.74 W/SF
• 25 reduction in energy consumption

24
Elements of Calculite Remote Phosphor Frame
System
Powercore driver
Flexible mounting Calculite frame
25
Light Engine Assembly to Frame-In-Kit
26
Calculite Powercore SSL Driver

• The preferred method of regulating LED drive
  current is to drive the LED with a
  constant-current DC power source
• The light output of an LED is proportional to its
  forward current
• There are currently no ANSI standards for power
  supplies so it is critical that the driver match
  the electrical characteristics of the LED or
  array it is driving
• There is energy lost in the power conversion
• Calculite Driver is Class 1 Philips Powercore
  technology ( 95 efficient)
• Powercore drivers are designed to maximize
  efficiency for each application

27
Calculite Powercore SSL Driver

• Electronic Power Supply
• 120 or 277V
• 347V (Step Down Transformer)
• Encased (same driver for both 20W 10W)
• Overload and short circuit protection, thermal
  protect against overheating
• Low noise potted construction for even demanding
  theatre applications
• Minimum Starting Temperature
• -20º C
• Dimmable with standard electronic Low Voltage
  (ELV) dimmers.

28
Dimming Capability

• In comparison to compact fluorescent products
  which require specific, and often expensive,
  dimming controls Calculite solid-state down
  lights can be dimmed down as low as 5 using
  off-the-shelf electronic dimmers.

29
LED Life

• Lifetimes of 50,000 hours life or more are
  possible with a properly designed system
• Although failures are possible, LEDs typically do
  not burn out, light output degrades over time
• The degradation rate increases with increased
  junction temperature
• Phosphors degrade with time and temperature and
  encapsulant materials can yellow over time
• For general illumination, life is generally
  measured to 70 lumen maintenance (L70) or when
  light output decreases to 70 of initial lumens
• Designed Tested to IES Recommended Standards
• LM-80-08 IESNA Approved Method For Measuring
  Lumen Depreciation of LED Light Sources

30
Industry Best Warranty

• Lightolier is emphasizing confidence in our
  product and a commitment to our specifiers with
  an industry best 5 year warranty covering all
  components. Conventional equipment typically
  offers separate warranties for the lamp and the
  ballast.
• Assembled in State of the Art clean room in
  Lachine, Quebec

31
Calculite Rounds

• 4 ½ aperture Downlight

• 4 ½ aperture Open Wall Washer

C420LEDDL40CCLW 20 watt
C420LEDWW40CCLW 20 watt
C410LEDDL40CCLW 10 watt
C410LEDWW40CCLW 10 watt
32
Round Reflector Finishes
33
Calculite Squares

• 4 ½ x 4 ½ aperture Downlight

• 4 ½ x 4 ½ aperture Lens Wall Washer

C4X420LEDDL40CCLW 20 watt
C4X420LEDWW40CCLW 20 watt
C4X410LEDDL40CCLW 10 watt
C4X410LEDWW40CCLW 10 watt
34
Square Reflector Finishes
35
New Construction Frames

• Utilizes Calculite HID platform
• Modified version for square
• Non-IC only
• Light engine connects to power supply via modular
  plug
• Total depth
• Round aperture 6
• Square aperture 5 ¾
• 2 thick ceiling capable
• Round adjustment with frame
• Square adjustment with trim
• Available in 120V, 277V and 347V with custom
  step down

C420LED1
C4X420LED1
36
Retrofit Kits

• Convert existing 4 6 installations
• Screw-in version 120 volt
• Medium screw base socket without additional
  wiring
• Can easily convert existing Calculite TRM7053
  TRM7054 incandescent installations to a
  sustainable, energy-efficient solution
• J-box version convert by re-wiring at j-box.
  120V and 277V

CU20LEDS1 CU20LEDJ1
37
Remodeler Frames

• Available in 4 ½ ( 6 to follow)
• For existing Non-IC applications
• Hinged J-Box design permits easy insertion
  through ceilings
• 2 thick ceiling capable
• Tool-less installation 3 tooth (ratchet) clips
  secure ring to ceiling
• Integral Driver casing and J-box ensure cool
  operation
• Available in 120V, 277V and 347V with custom step
  down

C420LEDR1
38
Product Options

• Accepts 4 ½ Vetro decorative accessories

39
Surface Cylinders

• For indoor applications (phase 1)
• Outdoor IP66 (phase 2) in process
• Integral Driver available in 120V 277V (no 347
  step down for now)
• Available in 5 different mounting configurations

C420LEDCW30CCL1
40
The Calculite LED Promises

• Performance
• 1,000 System Lumens
• 50 Lumens / Watt
• Reliability
• 50,000 Hours
• 5 Year Warranty
• Wet Location
• Aesthetics
• Calculite Optics
• Cut-off
• Glare Control
• Price
• Total Cost of Ownership story
• Variety
• 10 watt and 20 watt
• Round and Square Construction
• Downlights and Wall Washers
• Five Finishes
• 3 flanges

41
Our LED Promise

• Low Cost of Ownership
• Energy Savings
• High Fixture Efficacy
• Quality of Light
• Great Cutoff
• Uniformity Consistency
• Reliability
• Industry Leading 5 Year Warranty
• Tested to IES Standards Testing (LM-79 LM-80)
• Long Life (L70)

42
CANLYTE SOLID STATE LIGHTING
Canlyte with Philips, Lightolier SSL, Calculite,
Color Kinetics and Keene LED products is
positioned to be the leading company for SSL
products in the Canadian market