Title: Diapositive 1
1CANLYTE SOLID STATE LIGHTING
Canlyte with Philips, Lightolier SSL, Calculite,
Color Kinetics and Keene LED products is
positioned to be the leading company for SSL
products in the Canadian market
2NextLEDTaking LED to the Next Level
3NextLED The New Standard in LED Technology
- Canlyte Philips
- LED Development Team
- Technology
- High-end Optical Design
- Standards Legislation
- Developed a New Standard in
- Light Quality
- Reliability
- Energy Efficiency
- System Approach
- Develop a Wide Range of Products
- Commercially Viable Sustainable
- Performance
4IES Recommended Standards
- Designed Tested to IES Recommended Standards
- IES LM-80
- IES Approved Method for Lumen Depreciation
Testing of LED Light Sources - IES LM-79
- IES Approved Method for the Electrical and
Photometric Measurements of Solid-State Lighting
Products
5NextLED Luminaires
Housing LED Driver Heat Sink LED LED Circuit
Board Asymmetric Collimators Mask
6NextLED Light Engine
- LED Circuit Board
- Asymmetric Collimator
- Collimator Orientation Mask
7NextLED Luminaires
Optics
8NextLED Optics
- LEDs Without Optics Have No Light Control
9NextLED Optics
- Directional Light Control Using Asymmetric
Collimators
10NextLED Optics
- Patented Asymmetrical Collimator
- Total Internal Reflection (TIR) Optical Principle
- Medium Beam 66 Vertical Aiming Angle
- Designed Using Optical Simulation Software
11NextLED Optics
angle i lt angle r (always)
i
r
12NextLED Optics
angle i lt angle r (always)
i
r
13NextLED Optics
angle i lt angle r (always)
i
r
14NextLED Optics
- Total Internal Reflection (TIR)
angle i angle r (always)
i
r
100 Internal Reflection (TIR)
15NextLED Optics
Total Internal Reflection (TIR)
16NextLED Promise Target Lumens
- Better Utilization of Lumens on the Task
- Fewer Initial Lumens Required
- Puts the Light Where it is Needed Most
- Achieve the same number of lumens on the task
with - Lower Energy Use
- Less Wasted Light
- Dark Sky Friendly
- Low Glare
- Ideal for Preventing Light Trespass
17Target Lumens - Garage
- Premium Metal Halide Spectra-Lyte
- Source Watts 150W
- Input Watts 185W
18Target Lumens - Garage
- NextLED Spectra-Lyte
- Source Watts 82W
- Input Watts 95W
19Target Lumens - Garage
- Results
- 49 Reduction of Input Watts
- 75 Reduction in Glare Zone Lumens
20NextLED Outdoor Luminaires
LED Circuit Board
21NextLED Circuit Board
- 54 Cree XR-E White Light LEDs
- 9 Strings of 6 LED in Series
- 444mA Constant Current
- Through each LED for 82W Board Version
- Zener Diodes in Parallel to Each LED
- LED End of Life Isolation.
- Specially Designed Board
- Tracings for Proper Heat Dissipation
- Aluminum Backed PCB
- eGRAF Thermal Interface Material
- 24 Hour Burn In Period
22NextLED Outdoor Luminaires
LED
23NextLED LEDs
- Cree XR-E White
- Colour Temperature 5000K
- CRI 72
- Lumens per LED 107-114
- Forward Voltage 3.4Vf
- All LED Products are tested in our Integrating
Sphere - Cambridge, ON
24NextLED Luminaires
Mask
25NextLED Mask Assembly
Keyed Orientation
26NextLED Mask Orientation
- Different Beam Direction Combine to Make a
Complete Luminaire Distribution - Pre Aimed Light Collimators from the Factory
Type Main Beam Left Zone
POLE
Central/Across Zone
Type Main Beam Right Zone
27NextLED Mask Distributions
Side Distribution
- Designed Tested to IES Recommended Standards
- LM-79-08 IESNA Approved Method for the
Electrical and Photometric Measurements of
Solid-State Lighting Products
Top Distribution
Type 2 Type 3 Type 4
28NextLED Luminaires
LED Driver
29NextLED Driver
- Electronic Class II
- Output 4A Constant Current Versions
- 120 to 277Vac, 347Vac (Step Down Transformer)
- 3kV Surge Protection
- THD lt 20
- High Level of Voltage Regulation
- High Power Factor gt 0.95
- -30C Start Temperature
- Built in Thermal Protection
30NextLED Luminaires
Heat Sink
31NextLED Heat Transfer
- LED Sources Conduct Heat
- Up from the Circuit Board into the Luminaire
- Must Quickly Efficiently Transfer Heat to the
Outside Environment - Heat Sink must not Compromise
- The LED
- Integrity of the Luminaire
32NextLED Heat Transfer
- Built for the Canadian Environment
- Downward Heat Sink Design
- Issues with Upward Facing Heat Sinks
- Dirt Debris Build Up
- Birds
- Snow Ice
NextLED
ConventionalLED
DownwardHeat Sink
Upward Heat Sink
33NextLED LEDs
- Important to Maintain Junction Temperature
- Lifetime (L70) Based on Junction Temperature
- IES Standard
- 60,000 Hour Life _at_ 70 Lumen Maintenance
- Designed Tested to IES Recommended Standards
- LM-80-08
- IESNA Approved Method For Measuring Lumen
Depreciation of LED Light Sources
34NextLED Outdoor LuminairesTaking LED to the
Next Level
35NextLED Spectra-Lyte
36Garage Canopy
- NextLED Spectra-Lyte Round Square
- 82W NextLED System (95W Input)
- Distribution Type II, IV, V (Square
Rectangular) - Lumens 4,900
- Lumens Per Watt 52
- Voltages 120V - 277V 347V
- Construction
- Die-Cast Aluminum Construction
- Vandal Resistant Lens
- Wet Location Listed
37NextLED Ellipse Silhouette
38Architectural Area
- NextLED Area Light
- 82W NextLED System (95W Input)
- Distribution Type II, III, IV, V
- Lumens 4,100 to 4,400
- Lumens Per Watt 43 to 46
- Voltages 120V - 277V 347V
- Cutoff Full Semi
- Construction
- Die-Cast Aluminum Construction
- Glass Protective Lens
- Wet Location Listed
39NextLED GeoScapes
40Decorative Wall
- NextLED GeoScapes Wallcube
- 82W NextLED System (95W Input)
- Distribution Type II, III, IV
- Lumens 4,200
- Lumens Per Watt 48
- Voltages 120V - 277V 347V
- Cutoff Full Semi
- Construction
- Die-Cast Aluminum Construction
- Glass Protective Lens
- Wet Location Listed
41NextLED FloodPak
42Wall Security
- NextLED FloodPak Wallcube
- 92W NextLED System (95W Input)
- Distribution Type II, III, IV
- Lumens Up to 4,200
- Lumens Per Watt Up to 48
- Voltages 120V - 277V 347V
- Cutoff Full Semi
- Construction
- Die-Cast Aluminum Construction
- Glass Protective Lens
- Wet Location Listed
- Not Intended for Flood Applications
43Next Generation NextLED
- Floodlighting
- PentaFlood Series
- PF2 PF3
- Available Q4 2009
- Architectural Area Lighting
- Optra Compact
- Available Q4 2009
44NextLED Promise
- Life Cycle Cost
- Low Total Cost of Ownership
- LED Technology Typically Cost More
- Fixture Energy Savings 30 to 50
- Lower Maintenance Cost
- Maximum Light Output, Control Quality
- Solves Issues of Intensity Uniformity
- Patented, Individually Oriented Optics
- Delivers Target Lumens
- Reliability
- Built in State of the Art Clean Room
- Lachine, Quebec
- Long Life through Proper Heat Management
- 24 Hour Burn In
- 5 Year Warranty
45NextLEDEnvironmentally Friendly Design
- Night Sky Friendly
- Fewer Pollutants
- No Heavy Metals Such as Mercury
- No Persistent Organic Pollutants (POP)
- No Volatile Organic Compounds (VOC)
- RoHS Compliant Parts
- Restriction of Hazardous Substances Directive
- Restricts the Use of Six Hazardous Materials
- Such as Lead, Mercury, Cadmium
46Our LED Promise
- Low Cost of Ownership
- Energy Savings
- High Fixture Efficacy
- Quality of Light
- Target Lumens
- Great Cutoff
- Uniformity Consistency
- Reliability
- Industry Leading 5 Year Warranty
- Tested to IES Standards Testing (LM-79 LM-80)
- Long Life (L70)
47CANLYTE SOLID STATE LIGHTING
Canlyte with Philips, Lightolier SSL, Calculite,
Color Kinetics and Keene LED products is
positioned to be the leading company for SSL
products in the Canadian market