How to Check & Solve Ethernet Cable Problems

1
How to Check Solve Ethernet Cable Problems
Ethernet cables are one of the most important
elements of any electric system. If they dont
work properly, the rest of the network will
become nonfunctioning. Any type of disruption
would make a faulty Ethernet Cables performance
slow. Today we will be checking out some
of the signs that indicate if your cable
is performing up to the standard or not. It
Often Loses Connection If you plug the cable into
the Ethernet adapter and the light doesn't turn
on, it could indicate a problem either with the
cable or the adapter. Also, if you are seeing
display messages like network connection is
lost or no connection, then somethings wrong
with the systems ethernet cable. In such cases,
make sure that youve connected the cable
properly. Otherwise, a bad cable will not work
even if properly connected.
2
You Always Have Slow Connection If your
connection keeps dropping or runs very slowly,
there are chances that you have a damaged cable.
If there is a tear on your cable, it can
break down the internal wire connection and can
cause a short circuit. If you find a bent cable,
try straightening it with your hands. In case it
is too beat up, you will need to replace
it. Connection Restored With A Wiggle Wiggling
the cable re-establishes a failed connection. If
you do this too often, it also means that you
have a broken connector on your hands.
Ethernet cables have a built-in plastic lever
that secures the cable into place within the
Ethernet adapter port. If this lever breaks, the
connection will drop. Do You Keep Replacing
Them? This is the ultimate sign that you
need to check your network ecosystem. If
replacing the ethernet cable eliminates the
problem, then its well and good. But if the
same problem persists with the new cable,
the problem relates to the network. There
could be some malfunction happening. In such
cases, there are three types of network cable
issues you should look for Testing Connectivity
Issues These issues are major because of a faulty
cable. Consider taking a quick test to check the
connectivity. To check, try plugging the
suspected cable into the network device or
network connector of another computer. Typically,
the
3
jack you plug the cable into is part of a network
adapter. It provides the interface between a
computer/ network device and the network
cable. These adapters have one or two LED
lights which state that an established
connection exists and transmission is happening
on the line. After you plug the cable into the
network adapter, the link LED should be on
to indicate a connection. If it doesn't
light up or flash, there might be a
problem with the cable or its connector or
both of them. Testing Performance Issues If your
connection is failing or transmitting data at
much slower speeds, you have performance-related
issues. This generally happens due to a
damaged or bent cable. Usually, you can
straighten a bent cable to solve the problem. And
if the problem persists, you might have to
replace the damaged cable. To troubleshoot,
visually scan the length of the cable and look
for sharp bends, kinks, or other physical faults
in the cable. If you find a sharp bend or kink in
the cable, straighten the cable and check if the
problem is solved. Before replacing it make sure
to shake the cable lightly at the connector side
to see if the connection can be re-established.
If so, then the problem is with the connector.
Which also means that you need to repair or
replace the entire cable. Testing Continuity
Issues If there are any faulty connectors or
bends in a cable, continuity issues can occur.
They can also occur by a cut or a sliced cable,
any kind of penetration by objects like a nail,
staple, screw, etc., or electromagnetic
interference. If you can visually scan the
cable length, check for any of these
causes. If not, test it with a continuity
4
tester. An electronic device is specially made
for this purpose. Such a device can help detect
problems caused by EMI, or radio frequency
interference. Still, Got Problems? Even after
doing all this if your network keeps failing, it
is very likely that issues are with local
network configuration, one or more of the
network connectivity devices. Like adapters,
switches, routers, and so on. Such faults
will require a higher level of
troubleshooting. If you are looking to buy new
ethernet cables, you can navigate to our ethernet
networking cables page from here. From Cat 5E
cable, Cat6A cable to Cat 8 cable, we have all
the cables to fulfill your requirements. An
Original Article Published Here https//www.sfcab
le.com/blog/how-check-solve-ethernet-cable-problem
s