How to login to my linksys router

1
How do I Reset Linksys Router?

• That is a common error. If you have forgotten the
  password of your router, and you want to recover
  it, so below is a way to resolve this issue. Read
  carefully every step and solve your problems via
  this method.
• Maybe there is some case happing, so that is why
  that case has been Generated as like this case
• Wrong credential id and password.
• logged in After a long time in the dashboard.
• Case-sensitive password.
• Wrong IP address type in the URL bar.
• Make sure, If you have entered all data correctly
  in the admin panel, that is fine Follow the Next
  method as given is below.
• Reset the password on your Linksys router if you
  suspect that it may have been breached by an
  unauthorized user. A compromised password could
  expose your network to a variety of security
  risks, including the possibility of malware being
  installed by a hacker without your knowledge.
  Resetting the password on a Linksys router and
  securing your network requires only a few
  minutes, and it's a wise investment of your time.
• Process- 1
• Press and hold the reset button on the Linksys
  router for 30 seconds. The location of the reset
  button varies depending on your model, but it is
  usually located in a small pinhole on the side or
  back of the unit. Insert a straightened paper
  clip into the hole until you feel resistance. A
  hard reset occurs, and the router is recovered
  to its factory defaults.
• Process 2

2
This article will road book you on how to reset
your Router to factory defaults and change the
routers password, and also you will learn How to
login to my linksys router, so let's follow
these simple steps
Before this process, you should troubleshoot and
check your hardware is in good condition or
not? Important notice Make sure your router
power LED should be blinking when you compress
the Reset button. This indicates that the router
is being reset properly.

• Press and hold the Reset button for 10 seconds.
• Remove the router power cable from the board and
  then re-plugin the Routers power adapter after
  30 seconds.
• Visit the Router's web-based setup page, or you
  can hit IP 192.168.1.1 on the browser directly.
• Click the right side tab and choose the
  "Administration" tab.
• Choose the Factory default sub-tab.
• Inside the Factory, Defaults submenu, clicks on
  the Restore Factory Defaults button.
• Lastly, click on the save settings.

3
Note You may use a combination of letters and
numbers and special characters for your router
password. Make sure that you take note of your
router password so that you may have a backup in
case you forget it.

• If you are unable to set up these settings, and
  you want to help instantly, so you can contact
  my expert team. They will support you.
• Second method
• Go to your computer browser and opens it.
• Open your favorite browser (Google Chrome,
  safari, Mozilla, Firefox)
• Enter this IP 192.168.1.1 address in this URL
  and hit the Enter key.

Note In that case, this IP address is not
working, so don't worry. Look on the backside
router. There are available IP addresses, or you
can contact admin.

• Enter your router login ID and password.
• The default's password is admin. If you changed
  or personalized your password, use that instead.
• You know if you have done successfully logged in
  to the dashboard, the
• screen below should appear.

4
How to login to Linksys wireless router
Way to find IP address on Windows Computer
Step-1. Go to your computer and open the Command
Prompt. Step-2. Type over their "ipconfig" and
then press Enter Key. Step-3. Looks at the
default gateway number and notes down this IP
address. Step-4. Make sure your computer should
be connected to the internet and the router with
a wired or wireless connection.
5

• IP users for MAC users
• Open your MAC.
• Tap on the Apple Menu Icon.
• Go to the "System preferences setting"
• Then click on the Network icon.
• Choose the type of connection you have with the
  Router.
• Examine the IPv4 address.
• Write note down Router or Gateway address.
• Note Make sure the computer must be connected to
  a Router wired or wireless.
• Step-1. Go to the computer and open the internet
  browser.
• Step-2. In the Address Bar, type the IP address
  of your router, and then press enter key.
• Step-3. Now it will ask you for the router user
  name and password.
• Step-4. The default password of Linksys router is
  admin
• Step-5. Leave the username blank.
• Step-6. In that case, many problems, you might
  change the router default password to something
  else.
• Step-7. If the default password is not working.
  Then try another password that you think you
  might have changed with the initial installation
  of the Router.

Using Linksys router setup page

1. Log in to Linksys router setup page.
2. Enter login ID and password.
3. Open the Linksys dashboard.
4. Visit the Administration tab.
5. Change the router dashboard password.
6. Click the Save Setting.

6
How to log into the router web interface

1. Open a web browser and enter the code 192.168.
   1.1 in the Address bar, then, hit Enter Key.
2. Fill in ID and password your login credentials in
   the fields provided.
3. The default password is admin.
4. To know if you have successfully logged in to the
   web interface, the screen below should appear.
5. Congratulation, now you have Successfully Linksys
   Router login IP.

How to Linksys ea6350 router login?
7
All routers such as Linksys have their very own
internet management. Internal servers that allow
a person to complete their Linksys router login
setup.
This Linksys router login web interface may be
accessed when customers have complete wireless
the Linksys setup technique. Therefore, it's
imperative to undergo the Linksys router login
system earlier than you began the configuration
of your Linksys clever router. Via this question,
we have got attempted to present your insights
on the way to sign in. for your Linksys log in,
and what troubleshooting steps are essential to
limit the troubles that could forestall Limit
you from having access to the Linksys router
login web page.
Manner to get admission to Linksys router login
Make certain you have got linked the Linksys
router via an Ethernet cable in your modem. Then
plug the electricity cable from your Linksys
clever router into the energy socket.
How to install your Linksys Router simply?

1. If replacing an existing router, disconnect that
   Router first.
2. Turn the antennas up and plug in your router to a
   power source. European versions press the power
   switch to (on).
3. Connect the internet cable from your modem to the
   yellow Internet port on your Router. Wait until
   the indicator light on your router is solid.

8

• Connect to the secure wireless name shown in the
  Quick Start Guide that came with your Linksys
  router login password. (You can change the
  network name and password later.) If you need
  help connecting to the Network, refer to your
  device documentation on the provided CD.
• Note You will not have internet access until the
  router setup is complete.
• Open a web browser to launch the Linksys Smart
  Wi-Fi Router setup instructions.
• If you dont see the instructions, type
  linksyssmartwifi.com in the address bar. At the
  end of setup, follow the on-screen instructions
  to set up your Linksys Smart Wi-Fi account.
• Use Linksys Smart Wi-Fi to configure your router
  from any computer with an Internet connection.