Change your watch bands yourself…..!

1
Ways to change a watch band

• Presented by http//www.watchpartsoutlet.com/

2
Fold the soft cloth a few times, so it provides a
good cushion for the face of the watch
3
Place the watch face down onto the soft cloth
4
Press down on the spring bar tool and pull it
slightly inwards towards the center of the strap
5
Place the spring bar to the side

• Follow the same steps to remove the strap on the
  opposite side of the watch.

6
Grab the new watch band.

• Pick up one of the new spring bars and place it
  inside the small strap on 1 side of the watch
  band. Depending on the tightness of the strap,
  you may need to push it in slowly until the strap
  opens wide enough to allow the spring bar inside.

7
Adjust the spring bar so that both sides of the
spring bar pop up and out of the strap
8
Pick up the second spring bar.
9
Position the first watch strap face down to match
the position of the watch.
10
Turn the watch from the face down position to the
face up position to ensure proper placement of
the watch band.
11
Turn the watch back over to the face down
position again
12
Use the spring bar tool.

• Push the spring bar tool or use any other watch
  maker tool back to guide the spring bar gently
  into the notch on the back of the watch. Wait
  until you hear a clicking sound. The clicking
  sound lets you know when you properly attach the
  spring bar inside the notch

13
Grab the other section of the watch band and
place the correct end into the notch on the watch.
14
Tug on each watch strap to ensure that the watch
strap is secure.
15
For more details contact us

• AddressWatch Parts Outlet607 South Hill St.
  Suite 448Los Angeles, CA 90014
• Telephone[phone]Fax[phone]

16
Thank you