- PowerPoint PPT Presentation

About This Presentation
Title:

Description:

electrical safety electrical inspection the following examples are intended to assist the building manger in determining the degree of compliance, wthin his/her ... – PowerPoint PPT presentation

Number of Views:13
Avg rating:3.0/5.0
Slides: 20
Provided by: Josep451
Category:
Tags: hazards | traffic

less

Transcript and Presenter's Notes

Title:


1
       
 
ELECTRICAL SAFETY        
2
ELECTRICAL INSPECTION THE FOLLOWING EXAMPLES
ARE INTENDED TO ASSIST THE BUILDING MANGER IN
DETERMINING THE DEGREE OF COMPLIANCE, WTHIN
HIS/HER OPERATIONS AND ACTIVITIES AND THE
ASSOCIATED ELECTRICAL HAZARDS IN THEIR
BUILDINGS.   ALL DESIGN AND INSTALLATION OF
EQUIPMENT AND FACILITES SHALL BE IN ACCORDANCE
WITH APPLICABLE NEC, OSHA, DOE, AND SLAC POLICIES
AND PROCEDURES.
3
INSPECT WORK AREA FOR ELECTRICAL HAZARDS DAILY,
SHOULD INCLUDE, BUT NOT LIMITED TO THE
FOLLOWING   EXTENSION CORDS        FRAYED OR
WORN
 

4
     GROUND PIN INPLACE (MISSING)  
       CONTINUOUS LENGTHS NO
DAISY-CHAINING      

5
     ACCEPTABLE
6
     UNACCEPTABLE      
7
     PROTECT FROM DAMAGE INCLUDING THAT
CAUSED BY FOOT OR VEHICLE TRAFFIC
8
ELECTRICAL PANELS
NO OBSTRUTION WITHIN 36 INCHES        IS THERE
SUFFICIENT CLEARANCE AROUND ELECTRICAL EQUIPMENT?
9
  GFCI (GROUND FAULT CIRCUIT INTERRUPTER)       
WITHIN SIX FEET OF SINKS AND EXTERIOR DOORS ON
METAL-SURFACED WORKBENCHES ON OUTDOOR
RECEPTACLES

10
     OUTDOOR WEATHERPROOF COVER (MISSING)


11
     TEST MONTHLY IF PRACTICAL


12
PROTECTIVE COVERS        GUARDING OF ENERGIZED
PARTS TO PREVENT ACCIDENTAL CONTACT OVER
POWER PANELS, JUNCTION BOXES, AND UNUSED HOLES.
13
ELECTRICAL PANEL DIRECTORIES        IN PLACE AND
ACCURATE AND POWER CABINETS AND BREAKERS PROPERLY
LABELED        


14
ENERGIZED WORK        ALERT THE
OCCUPANTS OF THE PLANNED WORK      WARNING SIGNS
AND BARRICADES      PPE (PERSONAL PROTECTIVE
EQUIPMENT)
15
LOCKOUT TAGOUT       DEVICE ATTACHED TO
PREVENT OPERATION      
16
OTHER HAZARDS/VIOLATIONS        RACEWAY
CANNOT BE USED TO SUPPORT LOW VOLTAGE OR LIMITED
ENERGY CABLES        GROUNDING BONDING OF
CABLE TRAYS
17
     OVERLOADED POWER STRIP      METAL LADDER
IN AREA WHERE EXPOSED ENERGIZED PARTS ARE
PRESENT  
18
MAINTENANCE REPAIRS        UNQUALIFIED PERSONS
SHALL NOT TAMPER WITH BUILDING ELECTRICAL WIRING

19
ELECTRICAL SAFETY IS EVERYONES RESPONSIBILITY
!        REDUCING ELIMINATING EXPOSURE TO
ELECTRICAL HAZARDS REQUIRES YOUR CONSTANT
ATTENTION    
Write a Comment
User Comments (0)
About PowerShow.com