True Shapes

1

Graphic Communication
True Shapes The Rectangular Prism
CDT Department
2
True Shape

• This type of drawing is asked to be drawn as part
  of a cut, prism, pyramid, cylinder or cone.
• It shows the actual shape of a sloping surface.
• They can be quite confusing but are not as hard
  to produce as they look.

3
True Shape

• As there are other slides and presentations
  depicting how to draw cut prisms, pyramids,
  cylinders and cones we are not going to show you
  how to do these things in this slideshow.
• Instead we will focus on producing the true
  shapes.

4
True Shape - Rectangular Prism
Here we will draw the true shape of the sloping
surface.
5
True Shape
Draw 2 lines at 90 to the cut from the bottom
and top of the cut.
6
True Shape
This line must be parallel with the sloping face
on the elevation.
Draw the first two corners on these two lines.
Make sure these are drawn clear of all the other
views to make the true shape clearer.
7
True Shape
From these points mark on the width of the block
from the plan.
8
True Shape
Now join up the dots using a straight edge.
9
True Shape
Here the true shape is shown more clearly.
10
(No Transcript)