Title: Water Pump Obstacle
1Water Pump Obstacle Creative Inventions and
Robotics www.build-it-yourself.com
Click to see Video
2Water Pump Obstacle
The Problem In order to recycle premium quality
junk, we need to sort it from all the trash and
gook and then scrub down the valuable
treasures. You Mission Build a water pump that
will get fresh water to the...
Premium Quality Junk Yard!
www.build-it-yourself.com
3Water Pump Obstacle
Grab 3 pieces of cardboard. Take one of them
and cut it into four parts as shown in the
drawing. Using tape, attach the pieces to make
two large triangles
www.build-it-yourself.com
4Water Pump Obstacle
Pump Surface
2
Tape 2 cardboard sheets together.Have them
overlap by about 2 inches
www.build-it-yourself.com
5Water Pump Obstacle
Tape the cardboard pieces together as pictured
below.Snip the last 4 inches off each of the
triangles.
www.build-it-yourself.com
6Water Pump Obstacle
Raise the triangle sides and tape the triangle
ends together.Tape it so that the sides are
pointing straight up.
Add triangle supports to keep the structure
upright.
www.build-it-yourself.com
7Water Pump Obstacle
Take a 4x4 square of paper and roll it into a
tube. Tape the seam and close one end. Attach
a popsicle stick along the side of the tube.
Glue the tube to the top of the pump
4
4
Bottle cap
www.build-it-yourself.com
8Water Pump Obstacle
Use another piece of cardboard to create the base
of the water pump. Fold and glue it into a
triangular prism. Glue one side of a piece of
foam to the triangular base.Glue the other side
to the bottom of the pump's ramp.
2
3
3
3
www.build-it-yourself.com
9Water Pump Obstacle
Now, decorate your water pump with beads and wire
to look like lights and hoses.
Water Pump Obstacle
www.build-it-yourself.com