Submitted by:Guided by: - PowerPoint PPT Presentation

About This Presentation
Title:

Submitted by:Guided by:

Description:

FIBER DISTRIBUTED DATA INTERFACE FDDI Submitted by: Guided by: Arun Kumar Gupta Mr. Vipin Kaushik M.Tech (Opto-Electronics)- II Sem Dept. of Applied Physics – PowerPoint PPT presentation

Number of Views:153
Avg rating:3.0/5.0
Slides: 23
Provided by: ISH94
Category:
Tags: fiber | guided | submitted | uses

less

Transcript and Presenter's Notes

Title: Submitted by:Guided by:


1
FIBER DISTRIBUTED DATA INTERFACE FDDI
  • Submitted by Guided by
  • Arun Kumar Gupta Mr. Vipin Kaushik
  • M.Tech (Opto-Electronics)- II Sem
  • Dept. of Applied Physics
  • SGSITS, Indore

2
Plan of talk
  • History Development
  • Introduction
  • FDDI Features

  • Working of FDDI
  • FDDI Types
  • Frame Format
  • Applications of FDDI
  • Advantages
  • Future of FDDI
  • Conclusion

3
History Development
  • FDDI was considered an attractive campus
    backbone technology in the early to mid 1990s
    since existing Ethernet networks only offered
    10 Mbit/s transfer speeds and Token Ring networks
    only offered 4 Mbit/s or 16 Mbit/s speeds.
  • Thus it was the preferred choice of that era for
    a high-speed backbone, but FDDI has since been
    effectively obsoleted by fast Ethernet which
    offered the same 100 Mbit/s speeds, but at a much
    lower cost and, since 1998, by Gigabit Ethernet
    due to its speed, and even lower cost, and
    ubiquity.

4
Introduction
  • FDDI LAN standards were developed by
    subcommittee X3T9.5 of ANSI (American National
    Standard Institute)
  • A networking technology that uses a dual ring
    topology often with dual networking equipment
    (concentrators, etc.)
  • FDDI facilitates redundancy and protection of
    the network.
  • If a device fails, the primary and secondary
    rings enter a "wrap" state to form a logical
    connection and thus maintain the logical ring in
    the event of a link failure.
  • FDDI is capable of data rates of 100 Mbps over
    fiber optic cable (SMF and MMF).

5
FDDI Features
  • Can be implemented over copper (CDDI)
  • The fiber optic cables have clear advantages over
    the copper cables. There is more security, and
    the fiber optic cables are more reliable than any
    other wire available.
  • The data transfer in the fiber optic cable takes
    place without any electrical signals being
    transmitted.
  • The data flow is undeterred and constant through
    a fiber optic cable.
  • Long distances can be covered for data flow using
    the fiber optic cable using a single node.
  • Maximum of 500 stations
  • Media access - Token passing
  • Speed - 100Mbps
  • Frame Size is large as compared to Ethernet i.e.
    4500 bytes

6
Working of FDDI
  • The inside architecture of the FDDI is based on
    the dual rings where the data is flowing in the
    opposite directions.
  • There are two levels of rings the primary and the
    secondary.
  • Most of the data transmission takes place using
    the primary ring and the secondary is idle.
  • However in case the primary does not work the
    secondary takes over the primarys
    functionalities
  • It also use optical bypass switch for avoiding
    the wrap

7
Wrap condition
8
Cont
9
Optical Bypass Switch
10
FDDI DAS Ports Attach to the Primary and
Secondary Rings
11
Function of Concentrator
12
FDDI TYPES
  • There are two types of fiber distributed data
    interface mainly.
  • The Single Mode Interface
  • The single mode uses the laser technology
    to generate the light
  • rays.
  • The Multi Mode Interface.
  • The Multimode fiber uses the LED display
    to generate the
  • light rays.

13
Cont
  • The difference in both these methods is that
    multi mode as the name suggests allows many rays
    at one single point of time to pass and the
    single mode laser allows one ray at one time to
    pass through.
  • The angles at which the light reflects on the
    cable are all different so by the time they reach
    the nodes the time at which they arrive is
    different. In a single mode there is no such
    confusion so the data arrives at the node in a
    streamlined fashion.
  • The methodology which the multi mode uses is
    called modal dispersion and it is used in an
    environment which has limited boundaries.
  • In comparison with the multi node the single
    node will be able to carry more data and deliver
    at a higher speed along with covering larger
    distances.

14
Maximum Distance
  •  
  • 1300nm LED on Multimode fiber
  • 50/125 500 Mhz per Km 1.9 miles
  • 62.5/125 500 Mhz per Km 2.9 miles
  • 85/125 300 Mhz per Km 1.5 miles
  • 100/140 200 Mhz per Km 1 mile

15
Cont.
  • 1300nm Laser on Multimode fiber
  • 50/125 1,400 Mhz per Km 16.3 miles
  • 62.5/125 1,400 Mhz per Km 16.3 miles
  • 85/125 400 Mhz per Km 1.8 miles
  • 100/140 600 Mhz per Km 2.7 miles
  • 1300nm Laser on Single Mode fiber
  • 8/125 100,000 Hhz per Km 29.8 miles

16
FDDI frame format
17
Applications of FDDI
  • FDDI is used mainly in mission critical and high
    traffic networks where large amounts of data flow
    need to flow quickly and efficiently
  • FDDI is used  anywhere that utilizes a large
    network in need of high bandwidth.  Businesses,
    the Government, hospitals and other medical
    fields, stock exchanges and money markets etc.

18
Advantages
  • Higher Capacity and Performance than older LANs
  • More Simultaneous Transactions
  • Higher Availability (dual ring topology)
  • Predetermined Performance (adding users have
    minimal impact on throughput)
  • Longer Distance Loops (2 kilometers to 100
    kilometer)

19
Future of FDDI
  • A newer version of FDDI, called FDDI-2, supports
    the transmission of audio and visual information
    as well as data.
  • Another version, FDDI-Full Duplex Technology or
    FFDT, uses the same network setup as FDDI but can
    support twice the data rate, or 200 Mbps. 

20
Conclusion
  • After the advent of FDDI internet has advanced to
    a great extent even with common day to day users.
    The internet service providers are able to
    provide better services to the people and are
    able to facilitate internet in a better fashion.
  • Since internet has advanced and the number of
    users has increased, more and more businesses
    have started e-commerce applications on the
    internet.
  • Because the fiber distributed data interface is
    a safe and secure medium when it comes to cables
    the ecommerce transactions have found a reliable
    media.
  • FDDI through single node transfers are widely
    adapted by MNCs for communication between
    different branches.

21
References
  • http//www.etutes.com/lesson4/networking_fundament
    als_lesson4_7.htm
  • http//wiki.cisco.com/wiki/Fiber_Distributed_Data_
    InterfaceFigure_The_FDDI_Frame_Is_Similar_to_Tha
    t_of_a_Token_Ring_Frame
  • http//www.laynetworks.com/FDDI.htm
  • http//www.arcelect.com/fddi.htm
  • http//en.wikipedia.org/wiki/Fiber_Distributed_Dat
    a_Interface
  • Forging FDDI - Selected Areas in Communications,
    IEEE Journal by FE Ross - 2002
  • John M.Senior,second edition,page no.885

22
Thank You!
Write a Comment
User Comments (0)
About PowerShow.com