ITE1v4 - PowerPoint PPT Presentation

1 / 28
About This Presentation
Title:

ITE1v4

Description:

ITE1v4 JEOPARDY Computer Assembly Module 3 – PowerPoint PPT presentation

Number of Views:51
Avg rating:3.0/5.0
Slides: 29
Provided by: KenMa75
Category:

less

Transcript and Presenter's Notes

Title: ITE1v4


1
ITE1v4
JEOPARDY
  • Computer Assembly
  • Module 3

2
Router Modes
WAN Encapsulation
WAN Services
Router Basics
Router Modes
WAN Encapsulation
WAN Services
Router Basics
Acronyms
Power Supplies
DATA Cables
Booting Up
Installation
? ? ? F i n a l J e o p a r d y ? ? ?
100
100
100
100
100
100
100
200
200
200
200
200
200
200
300
300
300
300
300
300
300
400
400
400
400
400
400
400
500
500
500
500
500
500
500
3
Acronyms100
HDD
A What is Hard Disk Drive ?
4
Acronyms200
FDD
A What is Floppy Disk Drive ?
5
Acronyms300
POST
A What is Power On Self Test ?
6
Acronyms400
BIOS
A What is Basic Input Output System ?
7
Acronyms500
CMOS
A What is Complementary Metal-Oxide
Semiconductor?
8
Power Supplies100
Number of pins used by the SATA Power Connector.
A What is 15?
9
Power Supplies200
This connector connects to the FDD.
A What is 4-pin Berg?
10
Power Supplies300
Type of connector to connect to an Optical Drive. 
A What is Molex?
11
Power Supplies400
Some ATX Power Supplies have this optional
connector that connects to the motherboard.
A What is 4-pin or 6-pin AUX?
12
Power Supplies500
Type of Power Connector to connect to an ATX
motherboard.
A What is 20 or 24 Pin P1 Connector ?
13
Data Cables100
Number of pins on Floppy Ribbon Cable.
A What is 34 ?
14
Data Cables 200
Number of Pins on PATA cable.
A What is 40 ?
15
Data Cables300
Number of Pins in SATA data cable.
A What is 7 ?
16
Data Cables400
End of FDD Data Cable that connects to Floppy
Disk Drive A
A What is end with the twist?
17
Data Cables500
Identifies Pin 1 on data cables.
A What is the red stripe (sometimes other
color)? ?
18
Booting Up 100
The BIOS performs this check during initial
bootup.
A What is POST?
19
Booting Up 200
A single beep denotes this.
A What is system is functioning properly?
CCNA1 v3 Module 1
20
Booting Up 300
Where to find definition for beep codes.
A What is Motherboard Manufacturer documentation
or website?
CCNA1 v3 Module 1
21
Booting Up 400
Most common key used to access BIOS settings.
A What is DEL (delete) key?
22
Booting Up500
The configuration data for the computer is saved
here.
A What is CMOS? ?
23
Installation 100
Use this between heatsink and CPU for even heat
distribution.
A What is a Thermal Compound? ?
24
Installation 200
Install CPU into the ZIF socket by aligning ____
on CPU to ____ on ZIF socket.
A What is an Pin 1 and Pin 1?
25
Installation 300
Installing memory in a computer, the memory must
be aligned by
A What is aligning the notch on the memory with
the notch on the memory slot?
26
Installation 400
Use these when installing motherboard to make
sure the motherboard does not touch the bottom of
the case.  
A What is standoffs? ?
27
Installation 500
If two drives are connected to a PATA cable and
they are not using CS (cable select), they must
be configured as.
A What is Master and Slave ?
28
Final Jeopardy
5 Common BIOS Setup Menu Options.
A What is MAIN, ADVANCED, SECURITY, OTHERS,
BOOT?
Write a Comment
User Comments (0)
About PowerShow.com