Unit 10 - Stairway Construction - PowerPoint PPT Presentation

About This Presentation
Title:

Unit 10 - Stairway Construction

Description:

#1 R+T = 17.5 +/- 1 Example: 7.5 rise 10 tread 7.5+10=17.5 Stairway Construction The 4 rules of Stair construction .. #2 R X T = 75 +/- 3 Example: 7.5 ... – PowerPoint PPT presentation

Number of Views:94
Avg rating:3.0/5.0
Slides: 13
Provided by: technopal
Category:

less

Transcript and Presenter's Notes

Title: Unit 10 - Stairway Construction


1
Unit 10 - Stairway Construction
2
Stairway Construction
  • For the installation of landscape decks, often
    times Landscape Contractors will have a
    difference in elevation between the deck surface
    and finished grade.
  • This elevation is known as the TOTAL RISE of
    the deck. The total rise of the deck is an
    important measurement for staircase construction,
    because it will influence the amount of steps
    needed and the length of the staircase.

3
Stairway Construction
  • For safety reasons, it is important to have steps
    of equal height and width. Steps of unequal
    heights and widths can throw off the Stride of
    the person climbing the stairs, and result in a
    fall, and possible injury.

4
Stairway Construction
  • Nomenclature..
  • Total Rise - is the total height of elevation
    from finished grade, to the top of deck surface.
  • Total Run is the horizontal length of the
    staircase, and the amount it will protrude from
    the deck.
  • Riser is the actual height of the step. Average
    riser height is 7.5 inches, and they must be
    consistent from the top of the staircase to the
    bottom.

5
Stairway Construction
  • Nomenclature..
  • Tread is the width of the step, and also must
    be consistent throughout the staircase. Treads
    are typically 10 wide.
  • Nosing is the amount of overhang each tread
    has, typically 1-1 ½.
  • Stringers - are the side boards which hold the
    risers to the treads and the staircase to the
    deck. They are typically made of 2X10 or 2X12
    boards, and are referred to as CLOSED or OPEN.

6
(No Transcript)
7
Stairway Construction
  • The 4 rules of Stair construction..
  • 1
  • RT 17.5 /- 1
  • Example 7.5 rise 10 tread 7.51017.5

8
Stairway Construction
  • The 4 rules of Stair construction..
  • 2
  • R X T 75 /- 3
  • Example 7.5 rise 10 tread
  • 7.5 X10 75

9
Stairway Construction
  • The 4 rules of Stair construction..
  • 3
  • 2R T 25 /- 1
  • Example 7.5 rise 10 tread
  • 15 X10 25

10
Stairway Construction
  • The 4 rules of Stair construction..
  • 4
  • Slope should not exceed 35 degrees.

11
(No Transcript)
12
Stairway Construction
  • Another helpful formula..
  • C A B

2
2
2
Write a Comment
User Comments (0)
About PowerShow.com