Title: NETMAX
1NETMAX System Controller
- N8000 System Controller Hardware
- 32 audio channels on 4 audio slots
- Audio network port with 32 In / 32 Out
- 8 channel analog audio input / output cards
- Optional digital I/O cards (AES/EBU, SPDIF)
- Optional audio network card (CobraNet).
2Audio Features
Modular DSP Design 32 Digital Input Channels on 4
Internal Busses 32 Digital Output Channels on 4
Internal Busses
300 MIPS DSP horsepower onboard Expandable to 600
MIPS ? more than 1000 EQ-Filters
3Drag-and-Drop DSP
- CAD Style DSP Configuration
- Autocompiler
- DSP Resource Meter
- Real-time Control of DSP Modules
4Dedicated Loudspeaker DSP
- Single DSP block for Loudspeaker Processing
- 2-way, 3-way, 4-way, 5-way, Mono or Stereo
- Import and Export EV Loudspeaker Presets Directly
into DSP
5Mixer/Router Options
- Multiple Options For Audio Routing including
- Mixers
- Matrices
- Routers
- Priority Matrices For Connection to ProAnnounce
Systems
6Multiple EQ Options
- A Variety of EQs, including
- 31-Band Graphic
- Parametric
- N Band PE
- Tone Controls
- Shelves, Highpass, Lowpass, Allpass and Notch
Filters
7Integrated Web Server
Remote Connection, Configuration and
Administration Using Any Web Browser
8Integrated Web Server
Sophisticated Macro Level Programming with
Conditional Triggering and Scheduling of Events
9Control Features
TCP/IP Ethernet Control port for LAN/WAN
control USB Control port for local PC control 2 x
RS232 port for Touch-panel control GPIO ports for
AUX switching devices CAN port for remote access
to EVs RL RT amplifiers Full support of
redundancy in emergency call related systems.
10Frontpanel
LEDs / USB-port
11AUDIO CHANNEL LEDs Volume monitor for input and
output signals SIGNAL green, gt-25 dBu PEAK red,
18 dBu, 3 dB space.
Frontpanel
LEDs
NETWORK LEDs ACTIVE blinking or permanent on
means data transfer via Cobranet MASTER one of
the network partners is automatically the master
of the network.
SYSTEM STATUS LEDs Show status of unit and
system READY is on after booting and shows
satisfying operation FAULT shows error in unit or
system.
USB-connector Connection to a PC when unit is
assembled in a rack.
POWER LED Shows the unit is switched on.
12Rearpanel
AUDIO SLOTS
13Modules
AI-1
Module AI-1 8 channel-line-inputs Electronically
balanced Gain and pad software
controllable Dynamic range 117 dB Automatic
configuration
14Modules
AO-1
Module AO-1 8 channel-line-outputs 100
Ohms Electronically balanced 21 dBu output
level Dynamic range 118 dB Output
relays Automatic configuration.
15Modules
AO-1 AI-1MI-1
16Modules
AO-1 AI-1MI-1
17Rearpanel
CobraNet slot
18Modules
CM-1
Module CM-1 Cobranet Digital Audio Network
Interface 100BASE-TX Ethernet Interface Secondary
100BASE-TX Ethernet Interface Max 32 digital
audio channels via 4 ports in Max 32 digital
audio channels via 4 ports out Status LEDs.
CobraNet primary / secondary Port Left LED
Green link ok, communication active Red
fault Right LED Green interface in use Orange
Device is Cobranet Conductor.
19Modules
CM-1
20Modules
CM-1
21Modules
CM-1
22Modules
CM-1
23Rearpanel
Mainframe Connections
24Rearpanel
Mainframe Connections
Ethernet Interface RJ45 Ethernet connector for
100 BASE-TX / 10 BASE-T networks.
RS 232-Ports For connection of the N8000 with
external devices like multimedia systems,
building management systems, or PROANNOUNCE
manager ASCII-string protocol easy to
implement Configuration of ports via IRIS -
Software Direct communication with PC via
terminal program possible.
Remote-CAN Bus Connection to EV Remote
Controlled Amplifiers or other units with CAN
interface Connectors are in parallel STATUS led
shows activity at the CAN bus.
GPIO Control Port 4 inputs 0 .. 10 V freely
programmable Can be used as digital (on/off) or
analog (e. g. volume control) input Digital
inputs 0V low, 10 V high Analog inputs via
potentiometer 0 .. 10 V or from multimedia system.
GPIO Control Port 4 logical outputs, relay
contacts SPST Out 1 potential free for fault
signalisation Out 2..4 referenced to ground, 5V
output can be used to operate external relays or
LEDs with max 200 mA.
25Network Topology These distributors are called
hubs or switches. A hub sends all the signals to
every connection. A switch is more intelligent
and sends the data packets only to the
destination where they are needed.
star network.
26Network Topology There are more complex networks
(e. g. ring topologies) that are possible. These
must be realised with managed switches. With
these networks, higher safety and redundancy is
possible. Keywords in these types of networks
are Rapid Spanning Tree protocol, V-lan,
Wireless Lan.
27Network structures for typical stadium sound
systems
Redundant networks
- From the nonredundant minimum solution to the
maximum redundant network.
28Redundant networks
29Redundant networks
30CobraNet
CobraNet is a supplement to Ethernet. Because of
the popularity of Ethernet, all components are
cheap and available in a wide variety. Way to
move audio data over Cat5(6) or Fiber networks.
Specifics to Observe with CobraNet The audio
data is distributed via Bundles. In one bundle, a
maximum of 7 audio channels with 24 bit audio or
8 audio channels with 20 bit audio can be
transported .
31The CobraNet-bundle
32Specifics to Observe with CobraNet The capacity
of units working with Cobranet is measured in
these bundles (for example, the N8000 can receive
4 bundles and can transmit 4 bundles) It is
important to calculate the necessary bandwidth
before starting a project. For that there is the
PC program CobraCad.
33In NetMax we have the possibility to exchange
data with a PROMATRIX system The following
features can be realised
announcement/alarm into different Areas
announcement/alarm into different sectors of a
PROSOUND area audio signal from local or
networking (RS485) DPM 4000 transmission of
different BGM sources into the ELA
areas Transmission of all audio signals via fiber
optics, CobraNet, network Transmission of the RS
485 signals for networking DPM 4000 via fiber
optics.
34Script Files Script files as advanced programming
are extentions of the operating elements in the
IRIS program for use of multiple commands coming
from a single element.
35- EV NetMax with IRIS-NET software is the
integrating tool for audio and control - EV NetMax is the linking component to use
distributed ProSound installations as life safety
standard conform integrated systems - EV NetMax can be used as audio expansion for
Dynacord ProAnnounce systems
36- EV NetMax can be interconnected via data
interface, GPIOs and supervisioned audio lines - User tailored operation, supervision and
administration from e.g. paging consoles, PC or
touch TFT screens and media control systems - Status and failure signalization in both
worldsLife safety Paging and ProSound
37(No Transcript)
38(No Transcript)
39(No Transcript)