Snmek 1

1
Plates
MEDIN, a.s. Czech Republic www.medin.cz
2
TRAUMATOLOGY PLATES

• Pelvis Plates
• straight, softly or strongly curved
• flexible
• used bone screws cortical screws HA 4.5,
  cancellous screws HB 6.5
• usage for fixation of fractures of the pelvis
  bone, especially in area of acetabulum, and also
  other pelvis fractures symphysis pubis,
  posterior vertical fractures of hip bone and in
  areas adjacent to sacrum.
• number of holes 4 14 holes

Remark symphysis pubis kind of rigid connecion
of two bones, that are separated by fibrocartlige
3
TRAUMATOLOGY PLATES

• Plates for Osteosynthesis
• plates for osteosynthesis, straight, 1/3, 1/4,
  1/2 tubular, self-compressing plates, LC DCP
  plates, reconstruction plates, T-plates,
  V-plates, cloverleaf plate, L-plates
• Fixation plates
• - for the fixation of bone on both sides of
  fracture securely, with screws
• - possible to reach partial axial compression
  through the eccentric
• position of screws at the wider plate
• - used bone screwscancellous screw HB 6.5

number of holes 4 10 holes
number of holes 6 16 holes
4
TRAUMATOLOGY PLATES

• Self-compressing plates - narrow, broad plates,
• LC DCP plates
• for compression of bone fragment without using of
  additional instruments.
• plate has compression holes - with angle up to
  45 on one side or both sides where the lower
  side of ball surface of screw head glides over
  the inclined plane of plate hole during the
  screwing of the screw thereby the fixed bone
  fragment is shifted to the fracture

Numer of holes 2 16 holes
Numer of holes 5 18 holes
Numer of holes 4 10 holes - partially fixating
and compression
5
TRAUMATOLOGY PLATES

• Compressing (reconstruction) plate
• enables the reduction of axial shift by loading
  of the plate
• used bone screws cortical screws HA 3.5
• number of holes 4 12 holes
• Straight Plates, 1/3, 1/4, 1/2 Tubular Plates
• used for fixation of small bone fragments
• used bone screws cortical screws HA 2.7, HA 3.5,
  HA 4.5
• cancellous screws HB 4.0

Numer of holes 3 - 8 holes
Numer of holes 3 - 10 holes
6
TRAUMATOLOGY PLATES

• T-plates
• for tibia and humerus head, for propping of
  tibia head, for distal
• radius. This plate enables the compression
  aslant of the T-section
• even before the axial compression.
• used bone screws cortical screws HA 3.5 , HA
  4.5
• number of holes 3 8 holes
• T-plates with spikes
• for correcting osteotomy of distal radius,
  support the synthesis stability, fractures of
  B-type distal radius, lateral collarbone without
  lesion (affection) of AC joint
• used bone screws cortical screws HA 2.7 a HA 3.5
• number of holes 3x3, 3x4, 3x5 holes

7
TRAUMATOLOGY PLATES

• V-plates
• for anterior tibia border (frontal border of
  tibia)
• used bone screws cancellous screws HB 4.0 , HA
  6.5
• L-plates (buttress)
• for propping of tibia head (knee-bone)
• used bone screws cancellous screws HB 4.5 a HB
  6.5
• L-plates (small)
• for fracture of fingers
• used bone screws cortical screws HB 2.7

8
TRAUMATOLOGY PLATES

• Cloverleaf Plate
• for inta-articular fractures of tibia head
  (tibia)
• used bone screws cortical screws HA 3.5, HA 4.0
• 2 sizes

9
TRAUMATOLOGY PLATES

• Operation Sets
• Thorax stabilisation set
• for fractures in the area of thorax
• Content
• Ribs stabilisation sets rib plates and screws
• Collarbone set collarbone plates
• Thorax stabilisation instruments instruments
  for application of implants

10
TRAUMATOLOGY PLATES

• Operation Sets
• Heel operations
• for fractures in the area of heel
• Content heel plates Y, L, YL, bone screws and
  instruments for application of implants

11
TRAUMATOLOGY - PLATES
Thank you very much for your attention!