Snmek 1

1
(No Transcript)
2
Section of Testing and Development Laboratories

• Is providing
• check and testing of raw materials
• check and testing of finished products
• material RD

3
Section of Testing and Development Laboratories

• Offer for external firms
• preparation of samples and mixtures
• evaluation of raw materials and products (all
  test methods are made acording to appropriate
  standards)
• technical advice and consultancy

4
Preparation of samples and mixtures

• preparation of filled mixtures and compounding of
  mixtures
• KO kneader BUSS
• mixture preparation by calendering
• - laboratory double-calenders (heated by steam or
  oil)

5
Preparation of samples and mixtures

• blowing technology (film, tubing)
• - laboratory blowing line VS Ø32 mm
• moulding of test specimens
• - laboratory moulding machine Collin (plates
  400x400 mm)

6
Preparation of samples and mixtures

• extrusion and lamination of sheeting /membranes/
  and plates
• - laboratory line Collin (chill-roll technology)

7
Raw material and product evaluation

• melt flow index(ITT)
• delivery plastometer M 201
• rheology characteristics of liquids and pastes
• rotation viscosimeter Brookfield
• rheology characteristics of polymer materials
• - rotation rheometer CVO Malvern

8
Raw material and product evaluation

• mechanical characteristics (sheeting, plates,
  conveyors)
• tearing machines Instron and Adamel
• (10 10 000N)
• determination of friction coefficient
• inclined plane, horizontal plane
• dimensional stability
• - specimen exposition in oil bath or drying
  chamber

9
Raw material and product evaluation

• resistance to free-falling dart
• drop tester
• impact- and notched impact strength
• impact hammer Resil 5,5 (5J)
• hardness measurement (Shore A, D)
• - hardness testers Bareiss

10
Raw material and product evaluation

• material flexural strength at low temperatures
• - in freezing box (-30C)
• - dynamic impact test Frank (-40C)
• heating stability evaluation
• - stabilizer-meter PVC 03
• polymer material flammability evaluation
• - products of building- and automotive industries

11
Raw material and product evaluation

• weathering evaluation
• - QUV Tester (Q-Panel, 313 nm)
• determination of thermal stability to higher
  temperature according to Vicat
• - softening point
• evaluation of processing characteristics
• - plastograph Brabender, reometr MOR, Filter test

12
Raw material and product evaluation

• check of complex profiles according to pattern
• - profile projektor Mitutoyo
• vapour permeability measurement (WVTR)
• - Mocon (dynamic test)
• - Lyssy (statistic test)
• spectral analysis (transmission, luminance
  factor) objective measurement of colour
  appearance
• UltraScan Pro (HunterLab)

13
Raw material and product evaluation

• thermic analysis of polymer materals (material
  identification, melting point and glassy
  transition,..)
• DSC 200 PC Phox
• optic analysis (dimensional stability, profile
  thickness, embosssing,..)
• mikroscope Mitutoyo (with scannable camera)
• making the test of polymer materal welding test
  device
• - koop (weld strength under heat and cold
  conditons)

14
Technical advice and consultancy

• professional consultancy of technologies
• mixture mixing
• extrusion (blowing, chill-roll)
• moulding
• calendering
• professional consultancy of laboratory test
• providing of method and evaluation proposals
• material identification
• professional consultancy of plastic waste
  processing

15
Contact
Fatra, a.s. tr. T. Bati 1541 763 61
Napajedla tel. [phone] fax. 420 577
502 555 e-mail info_at_fatra.cz www.fatra.cz
Further information Ing. Jaroslav Císar tel.
420 577 502 119 tel. [phone] Ing.
Bedrich Zapletal tel. [phone]