Wybrane problemy bezpieczenstwa w ruchu drogowym - PowerPoint PPT Presentation

1 / 23
About This Presentation
Title:

Wybrane problemy bezpieczenstwa w ruchu drogowym

Description:

Number of Volvo and Fiat 126 cars that took part in accidents in the period of 1995 2000. ... the presented results, the classic methods of solving road ... – PowerPoint PPT presentation

Number of Views:42
Avg rating:3.0/5.0
Slides: 24
Provided by: wste
Category:

less

Transcript and Presenter's Notes

Title: Wybrane problemy bezpieczenstwa w ruchu drogowym


1
Wybrane problemy bezpieczenstwa w ruchu drogowym
  • Prof. dr hab. inz. Jerzy Kisilowski
  • mgr inz. Jaroslaw Zalewski

2
Contents
  • Introduction
  • Chosen theoretical and practical aspects of
    safety problems
  • 2.1. Problems of stable motion (definition of
    the stochastic technical stability (STS) by
    prof. W. Bogusz, STS aspects in mathematical
    model of railway car, possible STS aspects in
    mathematical model of road car)
  • 2.2. Problems connected with road accidents
  • Chosen statistical data
  • Conclusions
  • Bibliography

3
1. Introduction
  • This lecture is to give an overview on the
    possibilities of the use of stochastic technical
    stability (STS) in analysis concerning behaviour
    of mathematical models in different conditions.
    Some chosen statistical data are presented as
    well.

4
2. Chosen theoretical and practical aspects of
safety problems
5
2.1. Problems of stable motion
6
Definition of STS - assumptions
  • the set of stochastic equations ,
  • for the stochastic process and t?0 there
    is ,
  • fulfills the Lipschitz condition for another
    process ,
  • as a result there is only one solution tt0,
    x(t0)x0, which is a stochastic process.

7
Definition of STS
  • there are two areas in En ? finite and open, O
    finite and closed, where ? ? O,
  • there is a positive number e, 0ltelt1,
  • if every solution of , having the initiative
    conditions within ?, lies within O with
    probability 1-e then the structure is technically
    stochastically stable respectfully of ?, O and
    ?(t) with the probability of 1- e (fig. 2.1).

8
Fig. 2.1. Graphic illustration of stochastic
technical stability 2.
9
STS aspects in mathematical model of railway car
  • STS was used as a base on which a model of
    railway track was considered (lateral stability),
  • it was presented by E. Kardas-Cinal, PhD, while
    the basic assumptions are taken from Bogusz
    definition,
  • the areas of O adapted to this analysis are
    presented in fig. 2.2 and 2.3.

10
Fig. 2.2. Illustration of O for the lateral
translation of railway car 2.
11
Fig. 2.3. Technical conditions defining maximal
size L of O 2.
wL the space between the wheel and the track
12
STS aspects in mathematical model of road car
  • it is believed that car mathematical model can be
    analysed with the use of technical stochastic
    stability,
  • the area of the allowed solutions O is defined
    within the width of the road (fig. 2.4),
  • the car model will have its geometry disturbed to
    examine the stability with both correct and
    disturbed parameters.

13
Fig. 2.4. The maximal (approval) L of O between
the center of mass in car and the side of the
road. Source own research.
14
3. Chosen statistical data
15
Fig. 3.1. Number of Volvo and Fiat 126 cars that
took part in accidents in the period of 1995
2000. Source own research.
16
Fig. 3.2. Number of accidents with the
participation of Volvo and Fiat 126 cars in
relation to 100 vehicles of the given
make. Source own research.
17
Fig. 3.3. Number of trucks, killed in injured
accidents with trucks in Poland and Germany in
2000. Source own research.
18
Fig. 3.4. Killed and injured per 100 trucks in
Poland and Germany in 2000 Source own research.
19
4. Conclusions
  • According to the presented results, the classic
    methods of solving road safety problems basing on
    the elimination of consequences may not give the
    possitive effect.
  • It is important to take the reasons why road
    accidents occur into account. There are three
    areas of consideration.

20
The areas of consideration
  • Implementation of a selective system to evaluate
    road accidents considering such elements as type
    of vehicle and type of crash.
  • Connecting accidents with the condition of
    infrastructure.
  • Elimination of collisions and accidents results
    on the basis of road car stability and following
    research with the use of the existing tools.

21
Fig 4.1. The results of ISO Lane change with the
disturbed center of mass. Source own research.
22
5. Bibliography
  • Bogusz W. Statecznosc techniczna, Polish Academy
    of Sciences IPPT, Warsaw 1972.
  • Kardas-Cinal E. Badanie statecznosci
    stochastycznej modelu matematycznego pojazdu
    szynowego, Doctoral Thesis, Warsaw University of
    Technology, Warsaw 1994.
  • Kisilowski J., Kardas-Cinal E. On a Certain
    Method of Examining Stability of Mathematical
    Models of Railway Vehicles with Disturbances
    Occurring in Real Objects, Vehicle System
    Dynamics, Vol.3, 1994.
  • Kisilowski J., Choromanski W., Lopata H.
    Investigation of Technical Stochastic Stability
    of Lateral Vibrations of Mathematical Model of
    Rail Vehicle, Engineering Transactions, Polish
    Academy of Sciences IPPT, Vol.33, Warsaw 1985.

23
Thank you
Write a Comment
User Comments (0)
About PowerShow.com