Title: Providing services that help make The University of Memphis
1Environmental Health and Safety
Providing services that help make The University
of Memphis a safe and healthful place to learn
and work
2Laboratory Ventilation Exhausting Work
Dont be baffled by it .
3VAV System
Damper Actuator
Outside Air
Sash Sensor
Illustration Courtesy Exposure Control
Technologies, Inc.
4Strobic exhaust fan draws fumes out of the lab
via ducts.
5Phoenix valve maintains constant hood face
velocity at any sash height.
6Face Velocity Meter
Normal face velocity is 100 fpm Standby face
velocity is 60 fpm
7Status Lights
Lights indicate normal operation of the fume
hood. If hood is safe to use, one of these must
be illuminated.
Zone Presence Sensor automatically shifts system
between normal and standby modes.
8Zone Presence Sensor
9Energy Waste Alert
Yellow light and audible alarm indicate sash is
open and room lights are off. Close the sash!
10Caution Flow Alarm
Red light and audible alarm will warn of unsafe
air flow.
Immediately close sash, leave the area, and call
2699 to report malfunction. Do not use the hood!
11Emergency Switch
Push on to increase face velocity during a major
hazardous material release. Push off to return
to normal operation.
12Emergency Exhaust Indicator
Red light and audible alarm indicate hood is in
emergency exhaust mode. Note face velocity
increase.
13Mute Switch
Push to silence audible alarm. Status lights
will remain illuminated until status reverts to
normal.
14Use your ventilated storage cabinets
appropriately. Separate chemicals by
compatibility, and provide secondary containment
within the cabinets.
15Be good to your hood!
- Keep it clean
- Protect radiochemical hoods from corrosion
- Read the owners manual
16Tips for Safe Hood Use
- Confirm that the hood is working before you use
it - In case of hood failure, stop work in the hood,
close the sash, and leave the area - Keep the sash at or below the level indicated by
the arrows - Keep all apparatus and materials at least six
inches from the fume hood face - Elevate apparatus off the hood work surface
17Tips for Safe Hood Use
- Keep slots in the back of the fume hood
unobstructed - Minimize storage of chemicals in the hood
- Keep the head and upper body out of the hood
- Minimize traffic crossing the hood face
- Approach the hood from the front
18Tips for Safe Hood Use
- Withdraw hands and arms slowly
- Open and close the sash slowly
- Keep the sash closed when not actively using the
hood
19The End