Title: Writing a School or Departmental Safety Policy
1Writing a School or Departmental Safety Policy
- Presented by Andrew Knight University Safety
Adviser
2(No Transcript)
3From experience
- Andrew Knight University Safety Adviser
- Has written or assisted writing policies for
- University of Brighton Estate and Facilities
Management Department - Honourable Society of the Inner Temple
- Ordnance Survey
- North East Surrey College of Technology (NESCOT)
- Bradford and Bingley Geering and Colyer
- South African Airways
- INMARSAT
- Pets to the Vets
- Air Mauritius
- And many more..
4Fire and Emergency
- Alarm sounder
- Assembly point
5Other details
- Toilets
- Mobile phones
- Questions
- Confidentiality
6Group
- Introduce yourself to the person next to you.
Discuss what experience you have in writing
policies and what you hope to get out of today.
7Course overview
- The course aims are to
- Examine the essential content of a school safety
policy and the process by which the policy is
formulated, agreed and issued. - Enable delegates to draft and implement an
effective school safety policy - Make recommendations on how the policy will be
updated and reviewed
8Course objectives
- Have knowledge of what information should be
documented within a school safety policy - Be aware of factors that affect whether a policy
is Effective - Examining why local policies are needed
9Introduction
10What is a School or Departmental Safety Policy?
- It is a document structured in the same way as
the University Safety Policy, but containing
arrangements specific to the School. - It sets out specific responsibilities and makes
staff accountable for health and safety
11Why have a policy?
- FLIP CHART
- Why do you think it is necessary / important to
have a policy?
12Why have a policy?
- Who, what, when, how!
- Clear communication of health and safety
responsibilities - Sensible to set out the local arrangements for
managing health and safety - Policy writing is as much about the process, as
the end result
13Framework of the policy - HSG65
14Why have a policy?
- The Management of Health and Safety at Work
Regulations 1992 introduced a legislative
requirement for Planning, Monitoring,
Implementing, Review - This was translated by UCEA into University
sector guidance University Health and Safety
Management Code of Practice
15Why have a policy? 1 of 4
- The Health and Safety at Work Act 1974 requires
that businesses employing 5 or more employees
must have a written health and safety policy
16Why have a policy 2 of 4
- Section 2(3) of the HS at Work Act 1974 states
- "It shall be the duty of every employer to
prepare and as often as may be appropriate revise
a written statement of his/her general policy
with respect to the health and safety at work
17Why have a policy? 3 of 4
- The policy must state the general policy on
health and safety. - Describe the organisation and arrangements for
carrying out the policy - Be brought to the notice of all employees
18Why have a policy? 4 of 4
- Be revised whenever appropriate, and every
revision must be brought to the attention of all
employees. - It is a legal requirement under the Act, and has
to be complied with.
19Business Benefits
20Business benefits
- It is important to identify the benefits and
reasons for a School Policy. This can be useful
for building a business case or influencing
members of staff who may need to contribute
21Business benefits
- Why bother? We have a University Safety Policy?
Do we REALLY need another policy? - Positive and negative
- FLIP CHART
22Business benefits
- Enhanced reputation
- Specific hazards from School activities
- Specific organisational arrangements
- Individual responsibilities e.g. Radiation or
Biological Safety Officer - University Safety Policy does not contain detail
on local arrangements - Induction of new staff
23Business benefits
- Reduce accidents and ill health
- Reduce number of civil claims
- May provide defence in civil proceedings
- Boost staff morale
- Demonstrates management commitment
- Ensures consistency in approach to health and
safety - Saves time from duplication of effort
- Improves communication
24BREAK
25Links with the University Health and Safety Policy
- The University Safety Policy requires that Heads
of School document a School Safety Policy - A School policy is sub-ordinate to the University
Safety Policy
26Planning
27Getting started
- Commitment from HOS/HOD Crucial!!!
- Identify resources
- Sufficient time
- Good knowledge of staff roles and
responsibilities - Good understanding of the working practices
within the school - Able to use a word processor
- Able to communicate with all staff
- Gather together existing policies and procedures
28Formulation process
- Who will you need to involve? E.g. Trade Union
Consultation - Consider whether the policy will need to
consolidate and rationalise a previous piecemeal
approach to safety policy documentation? - May need a series of meetings with Senior
Managers
29EFM Case Study
Policy launch
Policy sent to HOD, approved and signed
Amendments to policy made
2nd draft produced for discussion at SMT
Review
Draft text prepared for comment by teams and
Trade Union Representatives
A series of meetings with Senior Managers arranged
Meetings with Health and Safety Department, Trade
Union Safety Representatives
Informal information gathering from discussion
with site based teams and site inspections.
Meeting with Senior Management Group to propose
Health and Safety programme. Policy need agreed,
timescale set.
30Writing the Policy
31Competence / Training
Procedures
Environment
Health and Safety Policy
Activities
Equipment
32Achieving its aim
- The policy should be specific to your business,
and should be clear about arrangements and
organisation for health and safety at work. - It should influence all your activities,
including the selection of people, equipment and
materials, the way work is done and how you
design goods and services.
33Policy structure
- We are now going to examine each of the essential
policy sections - Statement of Intent
- Responsibilities
- Organisation
- Arrangements
- Monitoring and review
34Step 1 Statement of Intent
35Statement of Intent
- Commitment to health and safety
- Show case
- Aspirational, but should be realistic and
achievable
36Statement of intent 1 of 7
- The statement should outline in broad terms the
Schools overall philosophy in relation to the
management of health and safety
37Statement of Intent 2 of 7
- Commit to operating the business in accordance
with the Health and Safety at Work Act 1974 and
all applicable regulations made under the Act,
'so far as reasonably practicable'
38Statement of Intent 3 of 7
- Specify that health and safety are management
responsibilities ranking equally with
responsibilities for delivery of services
39Statement of Intent 4 of 7
- Indicate that it is the duty of management to see
that everything reasonably practicable is done to
prevent personal injury in the processes of
production, and in the design, construction, and
operation of all plant, machinery and equipment
40Statement of Intent 5 of 7
- Indicate that it is the duty of all employees to
act responsibly, and to do everything they can to
prevent injury to themselves and fellow workers.
41Statement of Intent 6 of 7
- Identify the main person with prime
responsibility for health and safety (e.g. Head
of School)
42Statement of Intent 7 of 7
- Be dated so as to ensure that it is periodically
revised in the light of current conditions - be signed by the Head of School
43Practical exercise
44Step 2 Responsibilities
45Responsibilities
- Roles and responsibilities should set out clearly
who is responsible for what. - Key individual responsibilities e.g. Assessors
should be identified. - It is normal practice for the health and safety
reporting and delegation lines to mirror the
lines for the School.
46(No Transcript)
47Step 3 Organisation
48Organisation (people and their duties)
- The organisation section sets out the system of
reporting lines and delegation for health and
safety within the School - Committees and planning groups will need to be
identified
49Organisation (people and their duties)
- Individual job descriptions having a safety
content - Details of specific safety responsibilities
- The role and function of safety committee (s)
- The role and function of safety representatives
- A management chart clearly showing the lines of
responsibility and accountability in terms of
health and safety management.
50Documenting Change
51Lunch
52A cool reception!
- An accident has recently occurred in a University
laboratory, at the University of Hardknocks - A student was badly burned by contact with Liquid
Nitrogen whilst extracting samples from a Dewar.
The accident was reportable to Health and Safety
Executive. - Principal Lecturer Andrew Knight is responsible
for the course involving the use of Liquid
Nitrogen. - HSE Inspector Alan Cowen is tasked with
investigating the accident and meets with Andrew
Knight.
53Step 4 Arrangements
54Arrangements
- Generic e.g. Accidents, First Aid, Access,
Accident Investigation - Specific COSHH, Manual handling, Portable
Appliance Testing - Sensitive arrangements e.g. Security, Animals,
Toxins, Explosives, Radiation, Money.
55Essential arrangements 1 of 2
- Managing risk assessments
- Arrangements for consultation with employees
- Arrangements for maintaining plant and equipment
- Arrangements for safe handling and use of
substances
56Essential arrangements 2 of 2
- Arrangements for providing information,
instruction and supervision - Arrangements for training
- Arrangements for accidents, first aid and ill
health issues - Arrangements for monitoring (e.g. frequency of
inspections) - Emergency procedures (e.g. Fire Wardens)
57Arrangements (systems and procedures)
- Other arrangements may include
- Safety training
- Safe systems of work
- Environmental control
- Safe place of work
- Machine/area guarding
- Housekeeping
- Safe plant and equipment
58Arrangements (systems and procedures)
- Noise
- Radiation safety
- Use of toxic materials
- Communication and consultation
- Medical facilities and welfare
- Maintenance of records
- Expectant and nursing mothers
- Young persons
59Arrangements - performance standards
- Arrangements section can contain references to
the associated University Codes of Practice / BS
/ HSE guidance or legislation for further advice
and guidance. - It is not necessary to duplicate a university
Code of Practice if it accords with the School
approach.
60Arrangements Example WAHR
- Register of equipment
- Planning and organising
- Hierarchy of control for WAH
- Inspection and tagging
- Competence standards and training need
- Monitoring of works
- Weather restrictions
61Arrangements Example COSHH
- COSHH requires statutory testing of LEV
- Personal protective equipment requirements (could
link to University CoP) - Health surveillance
- Hazardous waste disposal
- Specialists e.g. Biological Safety Officer
62Practical exercise
- HANDOUT
- Arrangements sections
63Step 5 Monitoring and Review
64Monitoring and review
- Frequency for review will depend upon activities
- minimum every 2 years
- Auditing of the policy should be undertaken to
determine if the arrangements are being adhered
to - Inspections
- Staff SDR
- Accident investigations, trends
65Health and Safety Executive Model Policy
66BREAK
67Implementation
68Challenge generic content
- Dont fall into the trap of copying a policy from
a Google search - When writing or revising a policy challenge each
section. There have been instances where
Fairground Rides have been found in a School
policy!
69What is an Effective policy?
- The policy needs to be implemented!
70What is an Effective' policy?
- Applicable / specific
- Contains 4 key headings
- Accurate details
- User friendly well laid out, easy to navigate
- Clear and unambiguous
- Concise no padding
- Up-to-date
- Accessible website, bulletin
- Easily to update
71The good, the bad and the ugly!
- Practical Exercise - Working in pairs critically
analyse these real life policies. Decide whether
the policy is well written and likely to be
effective? Does it have all the sections?
72Layout, style and document control
- Page number e.g. Page 1 of 1
- Document control showing revision and version
history - Clear, easy to read font and font size
73Living document or dead in the water?
- Continuously updated to reflect changes in
legislation, used daily, different people, new
staff and frequencies
74Policy approval
- Who will need to approve the policy? Most
instances this will be the Head of School and
Senior Management Team - Consider specialists committees or forums? E.g.
Biological Safety Committee
75Communicating the policy
- The policy should be communicated to all staff
and possibly contractors - Question - Why would you need to communicate the
policy to contractors?
76Communicating the policy
- The statutory health and safety law poster
requires that health and safety information is
communicated. A written policy achieves this.
77Policy distribution 1 of 2
- An introductory letter, signed by the Head of
School should be appended to the policy
explaining the reasons for the policy and what
staff need to do - Issue electronically via e-mail to individual
staff, or use paper copies for workers without PC
access e.g. Cleaners
78Policy distribution 2 of 2
- Issue a summary copy or signpost in the form of a
leaflet - Give a copy to all new employees as an integrated
part of the induction programme - Affix the policy statement to notice boards
- Ensure that any superseded policies are destroyed
79Sustainability
- Health and safety poster campaign
- Tool box talks
- Web pages
- Notice boards
- Policy launch photo opportunities
80Making it happen
- Agree a target date for completion
- Send a draft to the University Safety Advisor
- Block out time in your calendar to write the
policy
81Implementation
- Has the policy been signed and dated?
82Common problems
- Unable to locate policy
- Policy too generic / none specific
- Policy not issued to all staff
- Use of jargon or acronyms
- Insufficient detail
- Out of date - in a format that is difficult to
revise - Missing essential sections (e.g. Organisation)
83Proof reading
- Ask a colleague to read the policy
- Check spelling, punctuation and grammar
- Does the policy flow well
- Is the font size suitable
- Are colours reproducible
84Model Policy
- HANDOUT This is a model policy that can be used
as a basis for your own policy.
85Action Planning
86Key messages
- Every health and safety policy must be a unique
document - Framework
- Process look beyond the document
- Manager buy-in
- Sustaining
- Help and support
87(No Transcript)