Soft Phone Installation and Registration

1
Soft Phone Installation and Registration

• Step by Step Instructions
• By Prof. Yousif _at_
• Valencia Community College

2
Installing Cisco IP Communicator
3
Network Requirements

• For Cisco IP Communicator to successfully operate
  as an endpoint in your network, your network must
  meet the following requirements
• Voice over IP (VoIP) configured on your Cisco
  routers and gateways
• Cisco CallManager Release 3.3(3) SR 3 or higher
  installed in your network and configured to
  handle call processing
• If you want Cisco IP Communicator to auto-locate
  its TFTP server, you also need an IP network that
  supports DHCP with Cisco Option 150 configured
  with the address of your TFTP servers.

4
Client PC Requirements

• Windows 2000 Professional with service pack 3 or
  later
• Windows XP Professional with service pack 1 or
  later
• Minimum connection bandwidth of 128 Kbps

5
Configuring CIPC
Set up manually if the PC where CIPC is installed
was configured with a static IP Address The TFTP
Server address is the same as your CallManager
address
6
CIPC Registration
Your CIPC will get a local Directory Number (LDN)
Automatically just like your 7960 Phone when
Auto-Registration is enabled.
7
Computer Telephony Integration (CTI) in Windows
From the Control Panel.
8
Computer Telephony Integration (CTI) in Windows
9
Verifying the CIPC Registration

• Devices? Phones ?Find Button
• CIPC gets a Local Directory Number Using Auto
  Registration Just like Cisco 7960 IP Phone

10
Manual Registration Option
Devices? Phones ? Add a New Phone
11
Adding a User
12
Assigning a Device to a UserDevice Association
Scroll down and click on update selected
13
Confirm Association
14
Restarting the CIPC
15
Changing Internal Caller ID

• Scroll Up and Click Update
• You will have to restart the phone afterwards.
  From the same page click on Reset Device/

16
Installing CIPC Admin Tool on CallManager
What the admin Tool Does for You.
17
Integrating Directories and Dialing Rules in CIPC
Click Next then Choose Auto-Detect after
verifying the values
18
Integrating Directories and Dialing Rules in CIPC