INTRODUCTION TO COMPUTER AIDED DESIGN AND MANUFACTURING - PowerPoint PPT Presentation

1 / 30
About This Presentation
Title:

INTRODUCTION TO COMPUTER AIDED DESIGN AND MANUFACTURING

Description:

Department of Mechanical Engineering and ... A Typical Example of Advanced CAD, CAM and CAE Application for Boeing 777. A short Movie '21st Century Jet' ... – PowerPoint PPT presentation

Number of Views:1240
Avg rating:3.0/5.0
Slides: 31
Provided by: drjac3
Category:

less

Transcript and Presenter's Notes

Title: INTRODUCTION TO COMPUTER AIDED DESIGN AND MANUFACTURING


1
INTRODUCTION TO COMPUTER AIDED DESIGN AND
MANUFACTURING
Dr. Jack Zhou Department of Mechanical
Engineering and Mechanics Drexel University,
Philadelphia, PA
2
A Typical Example of Advanced CAD, CAM and CAE
Application for Boeing 777
A short Movie 21st Century Jet
3
ADVANCED TECHNOLOGIES, SKILLS TOOLS IN DESIGN
MANUFACTURING
  • 3-D Solid Modeling Based CAD/CAM/CAE
  • Integrated Manufacturing Systems
  • Stereolithography RP Machine and CNC Machine
  • Computer System Networking

4
A TYPICAL CAD/CAM/CAE SOFTWARE FOR CE AND
TELE-MANUFACTURING
5
INTEGRATED MANUFACTURING SYSTEM FOR CE TM
APPLICATIONS
6
A Stereolithography Rapid Prototyping Machine
7
Principle of SLA Machine
8
Inkjet 3-D Printing
9
Inkjet 3-D Printing
10
RAPID PROTOTYPING MACHINING CLIP-1
11
RAPID PROTOTYPING MACHINING CLIP-2
12
Pump Housing (with support material)
13
Pump Housing (Final Part)
14
Golf Club
Support
Prototype
Part
15
Desk Top CNC Machining
16
Principle of CNC Machining
17
Integrated Remote Manufacturing
Drexel University
SUN OR HP WORKSTATION
I-DEAS PRO/ENGINEER MASTERCAM AUTOCAD
SANDERS 3-D DESK MODELER
Intergrated Remote Manufacturing
TelePrototyping
TeleManufacturing
PRO ENGINEER
3D SYSTEMS SLA-250 RAPID PROTOTYPING
MASTERCAM
CINCINATTI CNC MACHINING CENTER
3D SYSTEMS SLA-250 RAPID PROTOTYPING
FADAL 5-AXIS MACHINING CENTER
ATT Bell Laboratories (New Jersey)
State University of NY at Farmingdale
New Jersey Institute of Technology
18
AN EXAMPLE OF ADVANCED CAD/CAM/CAE IN STUDENT
PROJECT
  • A Race Car Spindle Design, Analysis,
  • Tele-Rapid Prototyping, and Tele-CNC Machining

19
Race Car Competition
20
Dragon Race Car Movie
21
Rear Wheel Spindle Assembly of FSAE Race Car
22
Boundary Conditions and Applied Force in FEA
23
FEA Results-Stress and Deformation
24
Manufacturing Simulation on I-Deas
25
Machine Operation
26
Tool Change
27
Spindle on..Coolant on
28
Drilling Cycle
29
Profile Milling
30
Finished Part
Write a Comment
User Comments (0)
About PowerShow.com