Report

1

• Report
• of
• ISO/ TC 23/ SC 19
• Agricultural electronics
• 2009 September 10

2
SC 19 Report
SC 19 Agricultural electronics
SC 19 Chairman Professor Dr.-Ing. Stefan
Böttinger, 1 University of Hohenheim,
Germany SC 19 Secretary Dipl.-Ing. Heiko
Kratz, VDMA (DIN), Germany 1
Chairmanship terminates at the end of 2009
2
3
SC 19 Report
SC 19 Agricultural electronics Scope

• Standardization of electrics and electronics for
  tractors, machines, systems, implements and their
  equipment used in agriculture and forestry,
  gardening, landscaping, irrigation and other
  related areas in which such equipment is used,
  including electronic identification of all
  categories of animals.

3
4
SC 19 Report
Secretariat (S) and participating countries

• Austria (ON)
• Belgium (IBN)
• Brazil (ABNT)
• Canada (SCC)
• Chile (INN)
• China (SAC)
• Denmark (DS)
• Finland (SFS)
• France (AFNOR)
• (S) Germany (DIN)
• Hungary (MSZT)
• Ireland (NSAI)

• Italy (UNI)
• Japan (JISC)
• Netherlands (NEN)
• New Zealand (SNZ)
• Russian Federation (GOST R)
• Slovakia (SUTN)
• Spain (AENOR)
• Sweden (SIS)
• Switzerland (SNV)
• United Kingdom (BSI)
• USA (ANSI)

5
SC 19 Report
Observer countries

• Australia (SAI)
• Czech Republic (SCNI)
• Hong Kong, China (ITCHKSAR)
• Iceland (IST)
• Republic of Korea (KATS)
• Mexico (DGN)
• Poland (PKN)
• Romania (ASRO)

5
6
SC 19 Report
SC 19 meetings held in 2007 - 2009

• 14th meeting Frankfurt, Germany 2007 March 29
• 15th meeting Ottawa, Canada 2008 May 08
• 16th meeting Frankfurt, Germany 2009 April 23

Planned meeting in 2010 (date and location yet
not confirmed)
17th meeting At the area of Venice, Italy 2010
March/April
7
SC 19 Report
SC 19 Working Groups

• WG 1 Mobile equipment
• Convenor Mr. Bob Benneweis, Canada
• WG 2 Stationary equipment
• Convenor Mr. Gilbert Grenier, France
• WG 3 Identification
• Convenor Mr. Kees vant Klooster,
  Netherlands
• WG 5 Wireless Sensor Networks
• Convenor Mr. Daan Goense, Netherlands
• WG 6 Safety of electronic control systems
• Convenor Mr. Dave Murray, USA
• WG 7 Testing procedures for positioning
  and guidance systems in agriculture
• Convenor Mr. Tim Stombaugh, USA

7
8
SC 19 Report
Liaisons (External/ Category A)

• CE European Commission (DG III/B/2)
• CEMA European Committee of Associations of
  Manufacuturers of Agricultural Machinery
• CEN/TC 337 Winter maintenance and road service
  area maintenance equipment
• OECD Organisation for Cooperation and
  Development
• AIMI Automatic Identification Manufacturers
  International
• CITES Convention of International Trade in
  Endangered Species of Wild Fauna and Flora
• EUROGROUP Eurogroup for Animal Welfare
• FCI International Federation of Kennel Clubs
• FECAVA Federation of European Companion Animal
  Veterinary Associations
• FIFe Fédération Internationale Féline
• FVE Federation of Veterinarians of Europe
• ICAR International Committee for Animal
  Recording
• CEN/TC 334/WG 9 Remote monitoring and control
  for irrigation
• CEN/TC 337/WG 3 Winter maintenance and road
  service area maintenance equipment
• UN/ECE United Nations/ Economic Commission for
  Europe

8
9
SC 19 Report
Recently removed Liaisons (External/ Category B)

• IATA International Air Transport Association
• UEVP Union Européenne des Vétérinaires
  Practiciens

Liaisons (Internal)

• ISO/TC 22/SC 3 Road vehicles/ Electrical and
  electronic equipment
• ISO/TC 204 Transport information and control
  systems
• ISO/TC 211 Geographic information/ Geometrics
• ISO/TC 127 Earth-moving machinery
• ISO/ISC/SC 61H Safety of electrical operated
  farm appliances
• ISO/TC 23/SC 4 Tractors

9
10
SC 19 Report
SC 19 Programme of work

• WG 1 ISO 11783 part 1-14, ISO 11786, ISO 15003
• WG 2 ISO 11787 part 1-2, ISO 11788 part 1-6,
  ISO 17532
• WG 3 ISO 11784, ISO 11785, ISO 14223 part 1-3,
  ISO 24631 part 1-6
• WG 5 Yet no standardization project assigned,
  evaluating
• WG 6 ISO 25119 part 1-4
• WG 7 ISO 12188 part 1-2

10
11
SC 19 Report
WG 1 Scope of ISO 11783

• ISO 11783 Tractors and machinery for agriculture
  and forestry - Serial control and
  communications data network
• Scope
• ISO 11783 as a whole specifies a serial data
  network for control and communications on
  forestry or agricultural tractors and mounted,
  semi-mounted, towed or self-propelled implements.
  Its purpose is to standardize the method and
  format of transfer of data between sensors,
  actuators, control elements, and
  information-storage and -display units, whether
  mounted on, or part of, the tractor or implement.
  It is intended to provide open system
  interconnect (OSI) for electronic systems used by
  agricultural and forestry equipment.

11
12
SC 19 Report
WG 1 Status of ISO 11783 part 1-14

• Part 1 General standard for mobile data IS
  06/2007
• communication
• Part 2 Physical layer CD 08/2009
• Part 3 Data link layer IS 10/2007
• Part 4 Network layer CD 05/2009
• Part 5 Network management DIS 09/2009
• Part 6 Virtual terminal DIS 08/2009
• Part 7 Implement messages application layer IS
  05/2009
• Part 8 Power train messages SR 06/2009
• Part 9 Tractor ECU CD 07/2009
• Part 10 Task controller and management DIS
  07/2009
• information system data interchange
• Part 11 Data dictionary (Maintenance
  Agency) IS 03/2007
• Part 12 Diagnostics IS 02/2009
• Part 13 File server IS 06/2007
• Part 14 Sequence control DIS 07/2009

12
13
SC 19 Report
WG 1 Scope and status of ISO 11786

• ISO 11786 Tractor-mounted Sensor Interface
  IS 11/2006
• Specification
• Scope
• Specifies an electrical connector and its pin
  layout for mounting on an agricultural tractor
  with a nominal 12-volt battery supply for the
  purpose of providing an interface between
  tractor-mounted sensors and equipment requiring
  signals from those sensors. Provides therefore a
  short-term solution to date communication
  between a restricted set of tractor-mounted
  sensors and other systems on agricultural
  tractors and attached machinery, in anticipation
  of the availability of a standardized digital
  data bus system.

13
14
SC 19 Report
WG 1 Scope and status of ISO 15003

• ISO 15003 Electrical and electronic equipment -
  Testing SR 06/2009 resistance to
  environmental conditions
• Scope
• Gives tests for specific environmental
  conditions and defines severity levels for tests
  which relate to the environmental extremes that
  can be experienced in practical operation of the
  equipment. The standard is intended to be used in
  determining the suitability of the equipment of
  the these machines, for use in a specified range
  of environmental conditions.

14
15
SC 19 Report
WG 1 Active items in the standardization work

• ISO/ TC 23/ SC 19/ WG 1
• ISO/CD 11783-2 CD voting ended on 2009-08-30
• ISO/CD 11783-4 DIS draft submitted on 2009-09-10
• ISO/CD 11783-5 Estimated DIS ballot launch on
  2009-09-16
• ISO/DIS 11783-6.2 Estimated FDIS ballot launch
  on 2009-10-20
• ISO 11783-8 2006 Close of Systematic Review on
  2009-06-17
• ISO/CD 11783-9 CD voting ends on 2009-10-02
• ISO/FDIS 11783-10.2 IS publication on 2009-09-15
• ISO/NP 11783-13 Amd1 NWIP voting ends on
  2009-09-11
• ISO/DIS 11783-14 FDIS draft in preparation
• ISO 15003 2006 Systematic Review since
  2009-06-17
• Further WG 1 activities are to work on a new DDMA
  for ISO 11783 part 1 Annexes

15
16
SC 19 Report
WG 2 Scope and status of ISO 11787 part 1-2

• ISO 11787 Data interchange between management
  computer and process computers
• Scope
• Provides the means to enable communication
  between on- farm process computers of stationary
  and mobile agricultural equipment or machinery,
  and management computers. Specifies an
  Agricultural Data Interchange Syntax (ADIS) to
  exchange data electronically. It implies that the
  syntax is not intended for real-time data
  exchange.
• Part 1 Data interchange syntax
  SR 09/2008
• Part 2 Transformation of ADIS/ADED into
  XML/ADED NP 04/2003

16
17
SC 19 Report
WG 2 Scope and status of ISO 11788 part 1-6

• ISO 11788 Electronic data interchange between
  information systems in agriculture
  Agricultural data element dictionary
• Scope
• Specifies how the agricultural data element
  dictionary (ADED) can be used in on-farm data
  exchange between management systems and
  stationary computers in dairy, pig and poultry
  farming. For example stationary computers in
  dairy farming are feeding computers, milk yield
  registrators and animal weighing computers.
• Part 1 General description CD
  04/2009
• Part 2 Dairy farming CD 09/2009
• Part 3 Pig farming CD 10/2008
• Part 4 Poultry farming WD 03/2000
• Part 5 Non-animal stationary applications
  WD 03/2000
• Part 6 Internet applications NP
  04/2003

17
18
SC 19 Report
WG 2 Scope and status of ISO 17532

• ISO 17532 Stationary equipment for agriculture
  Data IS 07/2007
  communications network for livestock farming
• Scope
• Specifies a protocol for the automatic and
  interactive communication and control of computer
  systems used in livestock production. It supports
  communication within the livestock production as
  well as across the Internet. The standard deals
  with the networking of those services used for
  livestock production which are provided by the
  devices in systems. It is not applicable to
  communication within subsystems.

18
19
SC 19 Report
WG 2 Active items in the standardization work

• ISO/ TC 23/ SC 19/ WG 2
• ISO/CD 11788-1 Moved to preliminary stage on
  2009-04-23
• ISO/CD 11788-2 Moved to preliminary stage on
  2009-09-11
• ISO/CD 11788-3 Moved to preliminary stage on
  2009-04-23
• No further WG 2 activities planned or scheduled,
  discussion at SC 19 level about disbanding the WG
  2

19
20
SC 19 Report
WG 3 Scope and status of ISO 11784 and ISO 11785

• ISO 11784 Radio frequency identification of
  animals IS 10/2004
  Code structure
• Scope
• Contains the structure of the radio-frequency
  identification code for animals. Does not specify
  the characteristics of the transmission protocols
  between transponder and transceiver.
• ISO 11785 Radio frequency identification of
  animals IS 03/2007
  Technical concept
• Scope
• Specifies how a transponder is activated and how
  the stored information is transferred to a
  transceiver.

20
21
SC 19 Report
WG 3 Scope and status of ISO 14223 part 1-3

• ISO 14223 Radiofrequency identification of
  animals
• Scope
• Contains the structure of the radio-frequency
  identification code for animals. Does not specify
  the characteristics of the transmission protocols
  between transponder and transceiver.
• Part 1 Advanced transponders Air interface
  DIS 08/2009
• Part 2 Advanced transponders Code and
  DIS 07/2009
  command structure
• Part 3 Advanced transponders Applications
  NP 04/2008

21
22
SC 19 Report
WG 3 Scope and status of ISO 24631 part 1-6

• ISO 24631 Radiofrequency identification of
  animals
• Scope
• Contains the structure of the radio-frequency
  identification code for animals. Does not specify
  the characteristics of the transmission protocols
  between transponder and transceiver.
• Part 1 Evaluation of conformance of RFID
  transponders IS 08/2009
• Part 2 Evaluation of conformance of RFID
  transceivers IS 08/2009
• Part 3 Evaluation of performance of RFID
  transponders IS 08/2009
• Part 4 Evaluation of performance of RFID
  transceivers IS 08/2009
• Part 5 Procedure for testing the capability of
  reading NP 12/2008
  ISO 11784 and ISO 11785
  transponders
• Part 6 Representation of the animal
  identification CD 04/2009
  information

22
23
SC 19 Report
WG 3 Active items in the standardization work

• ISO/ TC 23/ SC 19/ WG 3
• ISO 117841996 DAmd2 FDIS draft submitted on
  2009-08-19
• ISO/DIS 14223-1 DIS voting ended on 2009-08-06
• ISO/DIS 14223-2 Going to direct publication as
  IS
• ISO/CD 14223-3 CD voting ends on 2009-10-23
• ISO/NP 24631-5 No further development planned
• ISO/CD 24631-6 DIS draft in preparation
• Further WG 3 activities are the discussion about
  creating a new SC 20 within ISO/ TC 23 and the
  adoption of the SC secretariat

23
24
SC 19 Report
WG 5 Scope of the work

• Project definition Standardization of wireless
  communication for Fleet management, including
  implement synchronisation
• Scope
• Wireless data communication on a wider distance,
  between gateways in agriculture. The Gateways
  provide access to other communication networks or
  Electronic Control Units. The gateways can be
  located near or on agricultural fields, on trucks
  or farm equipment or in farm buildings. Other
  electronic control units can be Tractor ECUs or
  all other electronics requiring communication
  over a longer distance.
• Result of investigation
• Cell phone technology remains a realistic option
• Wifi technology with the extension of mesh
  hopping is one of the alternatives
• 868 or 920 MHz are a good backup technology

24
25
SC 19 Report
WG 6 Scope and status of ISO 25119 part 1-4

• ISO 25119 Safety of machinery Safety related
  parts of control systems
• Scope
• Provides general principles for the design (see
  ISO 12100-1) and development of safety-related
  parts of control systems (SRP/CS) used in
  tractors for agriculture and forestry,
  self-propelled ride-on machines and mounted,
  semi-mounted and trailed machines used in
  agriculture (this standard can be also used for
  municipal equipment, e.g. street sweeping
  machines). For these parts, it specifies the
  characteristics and categories required for
  carrying out safety functions.
• Part 1 General principles for design and
  development DIS 12/2008
• Part 2 Concept phase DIS 12/2008
• Part 3 Series development, hardware, and
  software DIS 12/2008
• Part 4 Production, operation, modification, and
  supporting DIS 12/2008 processes

25
26
SC 19 Report
WG 6 Active items in the standardization work

• ISO/ TC 23/ SC 19/ WG 6
• ISO/DIS 25119-1 Estimated FDIS ballot launch on
  2009-09-23
• ISO/DIS 25119-2 Estimated FDIS ballot launch on
  2009-09-23
• ISO/DIS 25119-3 Estimated FDIS ballot launch on
  2009-09-23
• ISO/DIS 25119-4 Estimated FDIS ballot launch on
  2009-09-23
• Further WG 6 activities are currently not planned

26
27
SC 19 Report
WG 7 Scope and status of ISO 12188 part 1-2

• ISO 12188 Test procedures for positioning and
  guidance systems in agriculture
• Scope
• Provides a procedure for evaluating and
  reporting the accuracy of navigation data
  determined using positioning devices that are
  based on GPS, GLONASS, GALILEO, or similar global
  navigation satellite systems (GNSS) and the
  performance of agricultural vehicles equipped
  with auto-guidance systems based on navigation
  satellite systems when operating in automatic
  steering mode.
• Part 1 Dynamic testing of satellite-based
  positioning DIS 12/2008
  devices
• Part 2 Satellite-based auto-guidance systems
  tested NP 07/2009 during straight
  and level travel

27
28
SC 19 Report
WG 7 Active items in the standardization work

• ISO/ TC 23/ SC 19/ WG 7
• ISO/DIS 12188-1 FDIS draft submitted on
  2009-08-24
• ISO/NP 12188-2 NWIP voting ends on 2009-10-24
• Further WG 7 activities are currently not planned

28
29
SC 19 Report
SC 19 Ongoing activities

• SC 19 Liaison requests
• between TC 23/ SC 19 and UN/ CEFACT TBG 18
• to avoid double standardization work due to
  similar themes and projects in the area of
  ISOagriNET, ADED/ ADIS, SOAP, XML-RPC
• between TC 23/ SC 19 and TC 23/ SC 6
• due to a new WG 15 within TC 23/ SC 6 who works
  on a new project Spray parameter recording for
  traceability the WG 15 could benefit from the
  ISO 11783 part 11 (Data Dictionary Maintenance
  Agency) and the ISO 11783 part 10 (Task
  controller)
• Illustrated parameters, such as spray rate,
  volume applied, and products applied, that exist
  in the Data Dictionary standard

29
30
SC 19 Report
SC 19 Further activities

• Data Dictionary Maintenance Agency request
• Request to add ISO 11783 part 1 Annexes to the
  data base
• WG1 has listed SPNs, PGNx, NAMEs and Manufactures
  code in a Excel spreadsheet
• Demand by used to have this information Message
  IDs, Diagnostic codes, Control Function codes
  (NAME Functions) and Manufacturer codes available
  online just like the Process data Identifiers
• Appointment of a new SC 19 Chairman
• Election has been started via CIB on 2009-09-08

30
31
SC 19 Report
Beside the work of the SC 19 Standard Advocacy

• VDMA and AEM have formed a common organization
  called Agricultural Industry Electronics
  Foundation (AEF) with the following objectives
• Optimise ISOBUS compatibility-tests
  (reproducibility of test results, automation,
  documentation)
• Platform has all rights on ISOBUS (brand,
  test-specification, certificate)
• Coordinaton of international cooperation
• Coordination of technical enhancements
• Organisation and setting up of certifications,
  plugfests, workshops, marketing-activities,
  training, consulting
• For detailed information please
  visit http//www.aef-online.org

32

• End of Report
• ISO/ TC 23/ SC 19
• Agricultural electronics

32