FSAE Engine Control Unit - PowerPoint PPT Presentation

1 / 11
About This Presentation
Title:

FSAE Engine Control Unit

Description:

All components soldered to board. Assembled Connector (what a pain! ... 1st time Surface Mount Soldering ... Ripped off some pads. Had to try 3 times ... – PowerPoint PPT presentation

Number of Views:189
Avg rating:3.0/5.0
Slides: 12
Provided by: philip215
Category:

less

Transcript and Presenter's Notes

Title: FSAE Engine Control Unit


1
FSAE Engine Control Unit
ECE 154 Embedded Systems Fall 2007 Dr. Board
InterimPresentation11/28/07
  • Ben Shelton
  • Philip Ethier
  • George Rossin

2
Project Description
  • No Changes
  • An Engine Control Unit
  • Reads several input sensors from the engine
  • Generates outputs for Injectors and Coils
  • Our Project entails
  • Selecting appropriate electronic devices
  • Designing and assembling a custom PCB
  • Writing assembly routines to handle all engine
    states
  • Placing the electronics in a heat resistant box
  • Mounting the box on the Duke Motorsports Car
  • Going Fast!

3
Accomplishments
  • Hardware We have a working board
  • Board received on Friday, November 23
  • All components soldered to board
  • Assembled Connector (what a pain!!)
  • Tested all input circuits to verify functionality
  • Connected to ICE and passed self test
  • RS232 communication functionality verified

4
Accomplishments
  • Software
  • Test program placed onto PIC
  • Serial Communication tested (with HyperTerminal)
  • ADC and timer initialization (incomplete)
  • Interrupt handler routines
  • Linear Interpolation routines (incomplete)
  • Research on setting outputs to Open Collector

5
Individual
  • Ben
  • General program outline
  • Interrupt Handlers
  • Global Variables
  • Phil
  • Assembled board
  • Interpolation routines
  • George
  • Assembled board
  • ADC initialization
  • Collectively
  • Tested input circuits
  • RS232 Communication

6
Fixed Problems
  • 1st time Surface Mount Soldering
  • Ripped off some pads
  • Had to try 3 times
  • Connectors didnt fit on board
  • Dremel and Sander were very useful
  • We purchased OPA337 instead of OPA2337
  • Switching from internal to external oscillator
  • RS232 didnt work and then it started to

7
Open Problems
  • ADC initialization
  • Large voltage drop in 3 input sensor circuits

8
(No Transcript)
9
GANTT
  • Bad News
  • Bens server crashed
  • Good News
  • We are slightly ahead of schedule

10
For the next 7 wonderful ones
  • Finish Code
  • Test Output circuits and verify functionality
  • Connect ECU to car for preliminary tests

11
Questions?
Write a Comment
User Comments (0)
About PowerShow.com