RFID Equipped Wireless Industrial Remote Control

1
Base engineering inc.

• Fuel Transfer Automation

2
Base engineering inc

• BASE systems can be found in military,
  petrochemical, aviation, and construction
  service. The company specializes in systems for
  extreme environments and hazardous locations and
  supplies many new truck OEMs and major fleets.
  We thoroughly understand the special requirements
  of the Gas Oil industry and our systems provide
  safe, reliable wireless control.

3
Industrial Radio Controls for Emergency Shutdown
Modern industrial radio controls enabled
emergency shutdown systems are developed for a
common purpose to shutdown the vehicle or
machines in an emergency condition. At the same
time, it also eliminates the cost of hard wiring
of fixed location emergency stop switches. The
operator can install any number of wireless
remote E-Stop switches within the plant facility
and communicate with one receiver/controller
unit. These systems will work in conjugation with
existing, hard-wired, manual E-Stop switches and
plant safety controls. Operator worn E-Stop
remotes can also be added to these systems.
4
Industrial Remote Control Systems for Preventing
Unauthorized Vehicle Movement

• Driver authorization system is necessary in the
  field of bulk transport. It is also required in
  the field of Bulk Fuel Delivery Trucks. The
  Driver Authorization System designed with the
  modern wireless hydraulic remote control system
  is widely popular among the industrial operators.
  However, there are so many manufacturers who
  mainly design Driver Authorization Systems
  specifically for commercial vehicles and
  machinery. This is a unique system which is used
  to protect the vehicle from unauthorized engine
  start or movement depending on the customer's
  application.
• The system generally the following features
• A keypad Unit is available with hidden enclosure
  screws
• A sealed parking brake low pressure switch is
  provided with DOT quick connect T fitting
• Sealed engine kill relay is also available
• All the systems are provided with proper
  installation guide
• All the components are pre-wired with quick
  connect electrical and air line fittings supplied.

5
DCE Certified Industrial Wireless Controls
DCE Certified Transport Wireless Industrial Leak
Detection System is specifically designed for
gas, anhydrous ammonia, industrial rock oil and
fuel trade. This can be a DCE certified
technology that may go with every type people DOT
and Canadian Transport North American country
laws for Passive Shut Off. These systems use
distinctive technology that regularly monitors
the off-loading method longing for a fast
amendment in discharge pressure. Whereas
victimization during a normal transport system
they'll find a separated hose or unsuccessful
association and shut the tank internal valve
inside 1/2 second. Generally the industrial
wireless controls have passive Leak Detection
System incorporates a practical Test button as
the way to see the readiness of the unit. These
systems area unit simple to put in and no
standardization or adjustment is needed. You will
be able to simply activate these systems
mechanically by gap the inner valve or pipe
guard. These choices embody multi-pipe or
multi-trailer sensors, automatic truck engine or
device shut-down. A number of the makers
additionally supply associate degree auxiliary
panel offered for automatic Leak Detection
Systems to permit drivers facet unloading
management. Wireless radio remote control in
transport leak detectors area unit wide utilized
in gas, anhydrous ammonia, industrial rock oil
and fuel trade. They principally use powerless
micro-computer controlled leak detection in
addition as stop working system. Ordinarily the
installation of the system needs a plug and play
element and therefore the installation will be
done inside an amount of two hours. Twelve
potential units, DC power, ground connections
area unit also used a customary power offer for
the system.
6
Industrial Wireless Controls for Aircraft
Refueling Control
Wireless Deadman series Trigger switch industrial
wireless controls are developed specifically for
industrial applications requiring positive
operator-to-machine contact. This remote control
technology enabled wireless trigger switch is
generally used to send Radio Frequency commands
signals of the pump. While using the system the
operator is unencumbered by cables and wires
normally used in 'deadman' fueling operations.
The system also incorporates a secure frequency
hopping spread spectrum radio link which is
virtually immune to outside electrical or RF
interference. FHSS technology enables the system
to provide interference free control. While using
as an automatic refueling system the Deadman
series industrial wireless controls can prevent
all types of electrical and radio interference.
All the operations will fail safe (shutdown) with
any loss of signal from transmitter. The
rechargeable transmitter delivers 30hrs of
continuous use between charges. 12/24VDC charger
is supplied by the manufacturers.
7
The Modern Age of Industrial Wireless Automation
In this age of industrial automation using radio
remote control is not a difficult task for the
operators. Industrial wireless controls has made
all the works regarding gigantic machines easier
and the productivity is also increased. Most of
the industrial wireless remote controls used in
engineering sectors are designed with high power
technology enabling them to handle all the
machinery works in industrial sectors. They
reduce labor cost in high extent and also reduce
the time spent behind the controlling of those
gigantic machines by manpower. At the same time
they also eliminate accidents in work field and
increase jobsite safety. Radio Remote Control
Products Most of the industrial machines can be
controlled by using high power radio remote
controls. These industrial radio remote controls
are mainly used in systems that need interest
free control. There are different types of remote
controls that are used in industrial purpose.
Some of them are Bulk Truck Theft Prevention
System, Transport Leak Detection System,
Automatic Refueling Controls, Proportional and
Non-Proportional Hydraulic Radio Remote Controls,
RFID Wireless Remote Control Systems, Aircraft
Refueling System, Process controls and many
more. Functionality These wireless industrial
remote control systems are mainly equipped with
two sections. Handheld transmitter and a receiver
control unit. The transmitter of these industrial
remotes has normal frequency range of 902-928 MHz
and optional 433.92 MHz, 869.7 MHz, and 2.4 GHz
are also available. The transmitter has normal
power of 100 MW.
8
The Technology Used in Remote Control Technology
Wireless remote controllers actually use radio
waves to send commands to different devices.
These industrial wireless controls are generally
used for industrial automation. They are the best
for controlling the gigantic machines. They are
actually used to get the interference free
control. The electromagnetic waves of different
frequencies are emitted through antennas and
picked up by the radio receivers. The
wireless remote controls are equipped with two
main control parts. One is the transmitter which
is generally very powerful and can send signals
within a great range. Another section of these
radio remote controls is the handheld receiver
control unit which catches the radio waves sent
by the transmitter. Therefore, when an operator
presses the button of the radio remote, the radio
signal is sent from the transmitter unit to the
device that you want to control. The receiver
unit is installed in the device which decodes the
signal and obeys the command accordingly. One of
the amazing aspects of these radio remote
controls is that they can send signals from
greater distances. Generally the radio waves can
travel as long as 100 feet to reach the receiver.
9
Wireless Remote Controllers with Additional
System Accessories
Remote control technology has moved a long way
along with the modern innovation. The modern
radio remote control systems are widely used and
they are made by using the latest technology.
Todays wireless remote controllers are not only
used in opening garage doors or playing music
systems. The use of radio remote control systems
has expanded to its highest capacity.
These modern wireless remote controllers are
mainly used in industrial sectors to control the
gigantic machines. The gigantic machines are
actually needed to be handled with interference
free control. The modern radio remotes are
equipped with FHSS or Frequency Hopping Spread
Spectrum Technology that enables them to prevent
all types of electrical and radio interference.
10
Utilize Transport Leak Detection System with
Remote Control Technology
Now the remote control technology has filled the
gap in a lot of businesses that required by
allowing them to completely restructure the way
that they work by changing the way that they
employ staff and also how they run their
industrial system. Wireless controls have greatly
changed the IT after sales market and also
changed the way that administrators and
technicians.
BASE Engineering is a pioneer in developing
industrial remote controls. Our industrial remote
control technology and systems are equipped with
powerful industrial wireless transmitter and they
have been employed around the globe to increase
job safety and productivity. We design and
manufacture extremely rugged industrial wireless
control and solutions for most industrial
applications such as process controls, industrial
petroleum, bulk transport, tank truck equipment,
tank truck loading, crane service, hydraulic
pumps and many more.
11
Industrial Radio Remote Control and Accessories

• In this modern era due to different innovations
  in the field of technology, selecting the best
  remote control technology is very important for
  ones everyday life. For this reason, this is
  important that you look into the different
  factors that affect the quality of use of remote
  controls before you invest in a remote control
  system. These technological derived products are
  needed so we can keep up to date with the most
  recent changes happening around us or in the
  world wide market.
• BASE Engineering is a pioneer in developing
  remote control technology. We design and
  manufacture extremely rugged industrial radio
  remote control and solutions for most industrial
  applications such as process controls, industrial
  petroleum, bulk transport, tank truck equipment,
  tank truck loading, crane service, hydraulic
  pumps and many more.

12
Industrial Remote Control Systems For LPG and
Refined Fuels

• In this modern era, remote control technology is
  a device that used to control a system or machine
  automatically. This is really a great innovation
  of human being. Now with the assistance of
  industrial remote control systems now one can
  operate a machine even from a distance. After the
  innovation of modern technology it has started
  gradually.
• Today the makers are making the machines and
  wireless systems with powerful energy. With these
  modern wireless remote controls now one can
  control complex electronic system or even a
  gigantic machine too. At the same time, the
  modern device is equipped with powerful
  transmitter they can operate a machine even from
  a great distance.
• BASE Engineering is a pioneer in developing
  industrial radio remote control systems. Our
  industrial remote controls are equipped with
  powerful industrial wireless transmitter and they
  have been employed around the globe to increase
  job safety and productivity. We design and
  manufacture extremely rugged remote control
  technology and solutions for most industrial
  applications such as process controls, industrial
  petroleum, bulk transport, tank truck equipment,
  tank truck loading, crane service, hydraulic
  pumps and many more.

13
Crane Service Industrial Radio Remote Control
with Modern Innovation
Crane service industrial radio remote control is
a device that greatly improves jobsite safety by
providing the operator the safest vantage points
for effective control of the crane. This is a
one-man control remote control technology that
virtually eliminates the need of a second
operator in order to stabilize the load while
guiding its placement. While using the system the
operator has a full freedom to move around the
work area while setting the load precisely into
the position. The transmitter of the Crane
Service Hydraulic Truck Remote Control is really
powerful. The transmitter has a frequency range
from 902MHz to 928MHz. Optional 433.92, 869.7and
2.4GHz, transmitter frequencies are also
available. The transmitter has a normal power of
capturing signal from 100mW. The remote control
technology enabled transmitter can work with a 56
bit DES encryption key transmission method of
transmission. An internally protected on card
PCB mounted antenna is also available. BASE
Engineering designs some great industrial radio
remote control systems for different engineering
and commercial purposes. Since 1996 over 50,000
BASE systems have been employed around the globe
to increase job safety and productivity. As a
result of this design effort we have the
confidence to offer a four year, no hassle, and
replacement warranty on every product we
manufacture. Remote control technology, in our
hand, has moved into the next level.
14
Deadman Series Trigger Switch Industrial Wireless
Controls

• Deadman series industrial wireless controls are
  developed specifically for industrial
  applications that require positive
  operator-to-machine contact. This unique Trigger
  Switch radio remote control is an innovation of
  modern remote control technology. It also
  includes a wireless trigger switch is used to
  send RF command signals to the pump.
• The system includes the following features
• 'Safety Timer' software available to limit switch
  closure duration prior to automatic shut-off
• This feature requires periodic trigger pulse by
  operator to maintain receiver 'on' condition
• Up to eleven other command functions available
  per customer requirements
• Modular quick-connect components allow for easy
  installation and field service
• Pre-wired solenoids are available for Pneumatic,
  Hydraulic, or Hose Reel control interface
• For more details please visit our website
  http//www.baseng.com/.

15
CONTACT US At Base Engineering, we take pride in
serving our customers 1 on 1. Our business truly
depends upon the satisfaction of our customers
and we strive to provide you with the most
efficient service. If you'd like to learn more
about our organiztion or learn how we can be of
service to your organization or have any other
queries, Please feel free to contact us. Just
fill out the form below or email us or give us a
call. Thank you for your interest in BASE
Engineering and we look forward to learning more
about your organization.
Address 600 Rothesay AveSt.John, NB,CANADA, E2H
2H1 Phone Fax Toll Free 1.800.924.1010Tel
1.506.635.2280Fax [phone]
Sales sales_at_baseng.com Technical
Support d.eavis_at_baseng.com