General Instructions

1
General Instructions

• General
• The intention of this guide is to give the
  Receiving Inspection Department Inspector
  guidance on what dimensions to check on
  complicated machined parts.The enclosed drawings
  represent a sample of each type of part used in
  Cathode Strip Chambers. Not all part drawings
  are represented. It is hoped that enough
  information is shown on the sample drawings to
  guide the inspector to know what is to be
  inspected on other similar parts.
• Drawings have not been provided for standard
  purchased hardware like screw, nuts, and similar
  items. These types of parts should be checked on
  a SAMPLE BASIS for conformance to the given
  drawing requirements.

2
Chamber Design Status

• ME 234/2 Chambers
• Design Drawings Complete and Released -
  Production Parts being Ordered
• Changes to Frame and Cable Drawings are Expected
  as Designs are not Finalized
• ME 234/2 Tooling
• Design Drawings Complete and Released except as
  noted
• Panel Transport and Storage Box (Cleaning
  Machine _at_ Aurora to MP9) Currently being
  designed. Should complete design and order by
  mid January.
• Chamber Shipping Containers Should complete
  design and order by mid February.
• MP-9 Panel Vacuum Lifting and Handling Equipment
  No drawings required System is on order and due
  in early January.
• No documentation currently exists for Soldering
  Machine An effort to document design and
  construction expected to be started in January,
  2000 (Anticipate duplicate machines may be
  required for IHEP and PNPI).
• Purdue to provide Drawings and Operating
  Procedures for Tension and Wire Spacing Test
  Equipment by beginning of January, 2000
• Major Manufacturing Tooling is in place and
  Operational.
• At least one set of all other tooling is
  available and ready for use Additional Carts,
  Tables, Support Brackets, and Consumables needed
  for larger scale production are on order.

3
Chamber Design Status

• ME 1/2 Chambers
• Prototype Design Drawings Complete Released
  Some drawing changes are required to update
  designs to Production Ready configurations.
• Changes to Frame and Cable and Assembly Drawings
  are Expected as these Designs are not Finalized.
  
• Parts have been procured for 2 prototype chambers
  plus 1 anode panel. Assembly of 1st. Prototype
  is in Process A few parts are yet required are
  due soon.
• ME 1/2 Tooling
• Design drawings have been completed and orders
  have been placed for the following items
• Winding Machine
• Tape Glue Dispenser
• Ionized Air Cleaner
• One Panel Cart One Set of Panel Supports
• Tension Tester under development at Purdue.

4
Chamber Design Status

• ME 2/1 Chambers
• Final Design is Complete and All Drawings
  Released
• ME 2/1 Tooling Final design near complete
  To be released this week To procure parts
  to build 1 one Pilot Production Chamber for
  PNPI. PNPI tooling is being assembled for
  testing. Waiting for Wire Fixation Bars to
  complete PNPI prototype kit.

5
Chamber Design Status

• ME 3/1 Chambers Complete Release Chamber
  by 3/1/00, and Tooling by 3/15.
• ME 3/1 Tooling

6
Chamber Design Status

• ME 1/3 Chambers - Complete Release Chamber
  by 5/1/00, and Tooling by 5/15.
• ME 1/3 Tooling