Why and how often alloy chain should be inspected?

1
why and how often alloy chain should be inspected?
2
introduction

• It is the only Chain grade recommended option
  used in overhead lifting equipment, alloy chain
  slings, and binder too. Alloy steel, Heat treated
  25 stronger than Grade 80 Alloy Chain.
• Alloy chain inspect and document at a minimum of
  12- months of periods.
• All inspection should be performed by an
  inspection expert who can identify the problems
  and what steps needs to be taken to prevent any
  hazard.

3
first inspection

• First inspect the chain after receiving it from
  the manufacturer is very important.
• Cross-check the tag to ensure that what you
  ordered and that the ratings meet all of your
  project characteristic and lifting requirements.

4
frequent

• Hire an expert to perform a regular optical
  investigation of damage, defects and other issues
  on joints and fastenings.
• Shock loads, severe angles, edges and excessive
  heat can quickly damage a Chain sling, so it is
  necessary to do a visual inspection before shift
  change or in lifting Uses.

5
at fix period

• This Inspection is done by a professional
  Technician.
• Factors that matters in inspection at Fix timing
• Multiple time uses
• The badness of service conditions
• Nature of the lifts being performed
• Experience gained on the service life of wire
  rope slings used in similar applications

6
Tel [phone] Fax [phone]
www.romaent.com