Edge banding tapes

1

• Edge banding tapes
• Published by
• https//uniboards.co.uk/

2

• Edge banding is one of the best methods for
  sealing your hardwood or laminate flooring. These
  tapes help you seal the edges perfectly leaving a
  high-quality finish. The tapes are available in a
  variety of styles, designs and sizes. You can use
  any size or shape of these tapes according to
  your requirement. They come with or without the
  edges. Edge banding tapes are made from high
  quality materials that offer long lasting
  performance and do not fade with the passage of
  time. Visit Edge banding tapes
• Edge banding tapes are made by using special
  adhesives called glue. The adhesive used for
  these tapes ensures no separation of the edges
  when the tape is placed over the surface.
  Therefore it provides an extra layer of
  protection to the hardwood or laminate flooring
  against scratches, marks and other damage. Edge
  banding tapes offer the service of high moisture
  resistance and strength thus making the floor
  wear less within a short period of time.

3

• Edge banding tapes are available in two forms
  without glue or with glue. One must choose the
  form accordingly depending upon the application
  requirements. Using glue is one of the easiest
  ways for applying the tapes but sometimes it
  leads to failure in the sealing process. It
  damages the floor and one must be careful to
  place the tape over the surface with care. Edge
  banding tapes are also available in different
  sizes. It depends upon the needs of the
  individual or the type of modular furniture.
  Click here edging tapes
• There are some simple steps that one must follow
  while installing the edge banding tapes. The
  first step is to clean the surface with a wet
  cloth and soap water. It is important to remove
  any dust particles from the surface to get the
  perfect result. Then one must apply the adhesive
  in a thin even layer over the floor and spread
  over in an even layer.
• Then one should cut the edges of the tape with
  the aid of scissors or blade. One must open the
  square edge banding by sliding the blade over the
  tape and then cut the edges. One must clean the
  tape after using it. To finish the installation,
  one should wipe off the excess edge bander using
  a soft cloth. One must install the edge banders
  in their proper position and if not done properly
  it will damage the floor.

4

• While using melamine edge banding tapes without
  glue, one must be careful to not to expose the
  smooth sides to the moist or the adhesive. In
  order to get a better adhesion, one can expose
  the edges of the melamine sheets in order to dry
  them. If this is not done then the adhesive may
  leak and one will have a sticky residue which
  will make it difficult for the smooth side of the
  sheet to adhere to the floor.
•  
• Summary
• Based in Essex supplying cabinet makers with MDF,
  Egger, Edging Tapes, Veneered, Birch Marine
  Hardwood Plywood as well as giving access to
  manufacturing machines and working space.
• Visit this site to learn more
• https//uniboards.co.uk/