How to use Electrical Wire Rope Hoist?

1
How to Operate Electric Wire Rope Hoist?
2

• In industry purpose it is very important to get
  the best quality and control wire rope hoist but
  it is also important to best out this machine
  with the industry experts to grow and explore.
• Hoist is a device used for lifting the loads
  with help of drum or lift, Electric Wire rope
  Hoist means use the electricity to lift the heavy
  loads with the help of drums which is adjusted by
  rope or chain.

3

• Electric Wire Rope hoist are composed of an
  electric motors, Gearboxes, Rope drum with rope
  guides, electric panel and large wire rope
  connected to a hook. Electric Wire Rope Hoists
  are used to carry large objects weighing between
  500 Kgs and 20 tons in various conditions like
  severe heat while welding, over the burners and
  furnaces or in acidic atmosphere.

4

• Use of Electric Wire Rope Hoist
• Voltage Checking
• We need to check Voltage because every product
  is made for a different electric force. So check
  the voltage required for your product before
  bringing it to use. If there is a slight
  difference in the voltage the speed of the hoist
  will also differ. The Speed of the Hoist is
  proportional of Voltage.

5

• Check the lubrication
• Confirm the gearboxes are filled up to the mark
  by recommended oil in hoist and the end carriages
  of the EOT Crane.
• Avoid Untangling
• Lower the rope fully when the hoist is up and see
  if it is not tangled. If so, untangle it. For the
  successful movement of heavy load it is very
  important that the rope is not tangled.

6

• Test buttons
• Once the check the Control switches of Electric
  hoist before adding the load .and also Test
  emergency stop button by pressing it, and confirm
  the wire rope hoist ceases movement.

7

• Limit Switches Test
• It is the main function of the electric wire rope
  hoist. When the hook reaches the top it should
  disconnect and the same must happen when the hook
  reaches the ground. Repeat this practice two
  times.

8

• Crane Motion Test
• This third set of the buttons helps move the
  crane horizontally. Test the crane by taking it
  to the top till the gantry rails.

9

• Load test With Trail Run
• This first set of buttons is used to lower and
  lifting the load. Press the down button till the
  hook reaches the ground and attaches with the
  load, then press the up button to lift the load
  up and detach the hook. Looking For Electric
  Hoists Manufacturers

10

• Be Safe
• Do not try to operate the electric wire rope
  hoist if people are under it. Stop the hoist and
  wait until the coast is clear. Also, ask your
  workers to take proper training before using it.
  Never stand near or under the crane whenever it
  is in the use. Avoid using the control buttons
  without any guidance.

11
Contact Information

• Address IDA Kukatpally, Gandhi Nagar, Hyderabad,
  Telangana 500037
• Phone [phone]
• website www.aacess.com

12

• Thank you