Know the Problems Associated with Your Pool Pump - PowerPoint PPT Presentation

About This Presentation
Title:

Know the Problems Associated with Your Pool Pump

Description:

The pool pump is an important instrument that runs to keep the water of your swimming pool clean, warm and hygienic. The pump does an important function of forcing the pool water to flow through the filtration system and in this process, all the foreign particles are filtered from the water. However, like every other mechanical component, the pool pump may also fail at some point in time. Go through the to know about the problems associated with your pool pump. – PowerPoint PPT presentation

Number of Views:21
Slides: 26
Provided by: spearswimmingpool
Category: Other

less

Transcript and Presenter's Notes

Title: Know the Problems Associated with Your Pool Pump


1
Know the Problems Associated with Your Pool Pump
2
The pool pump is an important equipment that runs
to keep the water of your swimming pool clean,
warm and hygienic.
3
The pump forces the pool water to flow through
the filtration system and get rid of the foreign
particles.
4
And like any other mechanical equipment, you may
also have to encounter with a failing pool pump.
5
Here are some of the common problems associated
with your pool pump.
- The impeller gets clogged - The bearings
wear out - A damaged motor shaft - A
broken seal
6
The impeller gets clogged
7
The impeller is a vital component of the pool
pump which is responsible for pushing water
through the pump system.
8
These impellers are vulnerable to clogging,
especially while pumping water that is full of
large debris.
9
When your gauge readings are low on a routine
basis, you should schedule a pool service
appointment with a good service provider.
10
The bearings wear out
11
The bearings within the pump are always at the
risk of getting damaged because of shock, excess
vibration and corrosion.
12
Always pay attention to the sound of the running
pool pump and if you experience any kind of
abnormality, then be sure to check the bearings.
13
It is always recommended to get both rear and
front bearings replaced even if only one of them
is found to be defective, which is in the
majority of the cases.
14
A damaged motor shaft
15
The motor inside the pump is the one which
provides power to all of the moving components
for the suction and discharge of the pool water.
16
If the motor shaft becomes damaged, it has an
adverse effect on the performance of your pool
pump and you get a compromised performance.
17
A significant sign of a damaged motor shaft is
leaking water underneath your pool pump.
18
A broken seal
19
A pump needs to be tightly sealed to the pump
housing with an O-ring and this rubber ring can
break over time as it is always surrounded by
water.
20
Due to broken seals, pressurized water will be
sent out of the pump and there is water spraying
from the pump housing.
21
When you suspect that your pool pump is
experiencing problems, then contact a pool
service company for immediate repairs.
22
Bottom line
23
Always inspect the working of the pool pump and
take the necessary steps to avoid the
above-mentioned problems.
24
And it is better to be aware of the potential
causes of the problems, undo them and try to
maximize the life of the pump.
25
https//spearpoolrepair.com/
THANK YOU !
Write a Comment
User Comments (0)
About PowerShow.com