Your Ultimate Tire Repairing Guide

1
Your Ultimate Tire Repairing Guide
2
Synopsis

1. Learn about Different Tire Types for Efficient
   Tire Repair
2. Learn Tire Safety Tips and Go for Regular Checks
   to Ensure Proper Safety
3. Few Reasons Why Opt for an Expert for Tire Repair
4. Maintain Your Tire Properly but Be Prepared to
   Talk to Auto Repair Mechanics
5. Types of Tire Damage and Reasons to Make Trips to
   a Car Tire Shop
6. Few Important Do's and Don'ts for Tires to Avoid
   Frequent Tire Shop Visits

3
Learn about Different Tire Types for Efficient
Tire Repair

• The Street Tire It is an all-season tire and is
  mainly designed to handle rain, snow, ice, and
  some dirt, in different temperature settings. It
  is based on a one-size-fits-all approach with a
  focus on fuel efficiency and general performance.
  It suits moderate climates quite impressively.
  Millions of cars come with all-season tires and
  perform quite well too.
• The Off-Road Tire You will identify an off-road
  tire from its 'masculine' looks. That look is
  basically due to the presence of jagged tread
  blocks. It looks rugged too, which is important
  because it has to tackle greasy or loose
  surfaces. You may even find off-road tires with
  some biting edges installed on the outer edge of
  the sidewall. Its deeper treads ensure proper
  clearing of slop and mud. These tires are usually
  made using a tougher rubber compound.
• The Performance Tire Also called a sporty
  performance tire, it comes with smooth and often
  groove-free surface area. As compared to an
  all-season tire, it comes with fewer grooves and
  sipes. Its bare central tread bands provide it
  with stability even at very high speeds. The tire
  is usually used when impressive grip and
  performances is needed.
• The Winter Tire As implied by the name, you will
  benefit from this type of a tire in the winter
  season to deal with snow and ice more
  effectively. it comes with many sharp edges that
  look more like the tread blocks. There is also
  some gap between the tread blocks allowing some
  ice and snow to be trapped in it for better
  traction. The idea is to allow snow stick to snow
  and provide you with much better handling and
  improved stopping power. If you look closely at
  these tires, you will notice there are numerous
  slits and sipes in the tread blocks. It is due to
  these slits that the tire becomes much more
  flexible, especially in lower temperatures. Since
  it is made using a high-quality rubber compound,
  flexibility is usually not an issue here.

4
Learn Tire Safety Tips and Go for Regular Checks
to Ensure Proper Safety

• Start by choosing the right tires. You should
  consider different factors before finalizing your
  decision of selecting car tires. Some common
  factors to consider are the way you drive, your
  weather conditions, and how often you drive. You
  should also ensure that the tires you are
  selected are suitable for your vehicle. Be sure
  to educate yourself about the way certain
  conditions can wear the tread and affect the
  control of your tires.
• Pay close attention to tire pressure and check
  the tread at the same time. You need to pay
  attention to the recommended air pressure for
  your tires. You should always follow those
  instructions and never forget to check the air
  pressure prior to longer trips. Be sure to check
  the tread at the same time to avoid driving on
  bald tires that can put your safety at risk.
• Do not forget to check and replace aging tires.
  Many manufacturers have clear instructions about
  how long you should keep using the same tire. It
  is a good idea to pay special attention to those
  guidelines and consider replacing the tire to be
  on the safe side. You can also consult your auto
  repair mechanics to confirm if there are signs of
  aging on your tires and if you should replace
  them or not.
• Ensure that the spare is good. Many people do
  quite well when it comes to checking their tires
  for wear and tear, but they often forget to check
  the spare. It is a big mistake. No matter how
  well you have maintained the tires of your car,
  there can be situations when you have to replace
  a tire on a short notice. This is when you will
  have to switch to your spare. If the spare is not
  good enough, you will find yourself in serious
  trouble. In case you are confused about checking
  the spare, you can always talk to a professional
  for advice.

5
Few Reasons Why Opt for an Expert for Tire Repair

• Be sure to check how trained a tire service
  technician is. In most cases, it is better to
  select a service provider and stick with them
  every time you need any assistance. You can use
  the internet to find the best tire shops in your
  local area. You can take your car there for
  regular checkups and ensure that all four tires
  as well as the wheels are in mint condition.
• Be sure to ask the technician to remove the
  damaged tire from the rim to inspect the inside.
  Trained technicians will know the importance of
  removing the tire first. They completely
  understand that even a small nail or screw can
  damage the sidewall, and it is usually not
  possible to get a clear idea of how severe the
  damage is unless the tire has been removed from
  the rim. Then, they will fill the void using
  rubber and use a repair unit to seal the inner
  liner. If you are not working with a trained
  technician, they would push you to have
  on-the-wheel tire repair done.
• Understand that going for string plus and similar
  repairs is not a good idea and are only
  considered a temporary fix. A patch by itself or
  a plug by itself is not recommended because it is
  not going seal the inner liner permanently.
  Moreover, it will not fill the void created by
  the penetrating object it would allow water to
  enter the tire and corrode the steel belts. You
  can use these plugs as well as emergency
  inflators or sealants as temporary solutions
  though.

6
Maintain Your Tire Properly but Be Prepared to
Talk to Auto Repair Mechanics

• Check your tires closely. You have to understand
  the fact that car tires take a lot of abuse,
  which is why it is important to check them
  regularly for any wear and tear. Many people
  think that a flat tire is the only type of tire
  damage, but that is certainly not the case. The
  truth is that many times the tire will continue
  to perform reasonably well even though when it
  has sustained some serious damage. For instance,
  you may never notice that your tire has lost a
  portion of its sidewall unless you check for such
  issues as closely as possible.
• Look for any bulges and cuts in the tires. Again,
  it is usually harder to detect cuts and bulges.
  You may have a lump or bulge visible in the
  sidewall or notice a missing chunk of rubber only
  when you examine the tire carefully. Such signs
  of damage are the result of a hard impact you
  may have it when your car hits a pothole or a
  rock. Therefore, it is recommended to go see auto
  repair mechanics after you have hit a pothole
  because such accidents can cause serious damage
  to the inner structure of your tire. Such
  accidents almost always lead to a misaligned
  wheel that can also damage tires over time.
  Moreover, you should regularly check the outer
  and inner sidewall surfaces for cuts and bulges,
  but even such damage can compromise the overall
  quality and integrity of your tire.
• Look for the signs of uneven wear. For this, you
  should examine the tire treads closely. It is
  important to ensure that they are worn evenly
  across the width. You should also check the
  recommended tread-depth mentioned in the owner's
  manual. In case of any signs of uneven wear, you
  should see a technician. You are likely to have a
  misaligned wheel if you notice more wear on the
  inner portion of the tread as compared to the
  wear on the outside. Do not ignore such signs and
  let a professional evaluate the overall condition
  of your tire to avoid any further complications.

7
Types of Tire Damage and Reasons to Make Trips to
a Car Tire Shop

• Types of Tire Damage
• You may have to deal with several tire related
  issues when driving your car, but getting a flat
  tire is usually the most common issue. It could
  be the result of a simple puncture or a serious
  cut to the tire. Cuts are usually due to external
  influences, such as protruding bodywork parts,
  bad road conditions, and sharp foreign objects.
  Punctures could be the result of sharp objects
  hitting the tire it could be anything like
  nails, screws, or even glass coming into contact
  with the tire.
• What Leads to Tire Wear in the Real World?
• Tire rotation
• It is an important consideration in some driving
  conditions. You may think that you should not be
  overly concerned about tire rotation when you
  have different tire sizes on the front and the
  rear of your car, but it still deserves your
  attention. Experts recommend that you should
  rotate your tires every 10,000-15,000km or else
  you will notice signs of wear on your tires. You
  can also go to a car shop or ask your dealership
  to rotate the tires every time you take your car
  for a service. In most cases, your car needs
  service after 15,000km.
• Wheel Alignment
• Not checking wheel alignment regularly may also
  lead to wear and tear to your tires. Generally,
  it is a good idea to check your wheels every
  10,000-15,000km, but depending on the vehicle
  type, you may have to check it sooner rather than
  later.

8
Few Important Do's and Don'ts for Tires to Avoid
Frequent Tire Shop Visits

• Be sure to check the air pressure every time you
  drive your car. You should use an accurate
  pressure gauge for this purpose. Keep in mind
  that though you can use a gauge at the service
  station, they may or may not be completely
  accurate. A specialized tire shop may have an
  accurate gauge available though. Under no
  circumstances should you be bleeding the tires.
  Do not let the air pressure out when your tires
  are still hot.
• Do not exceed the tire pressure recommended by
  the manufacturer. Many people make the mistake of
  going for 200kPa even when the manufacturer has
  not recommended this tire pressure. Do not make
  this mistake, especially before going on a long
  road trip.
• Do have your wheels checked regularly for proper
  alignment. Misaligned wheels will put extra
  pressure on the tires and will eventually cause
  serious damage. For wheel alignment, do make sure
  to follow the manufacturer's specifications only.
  Take special care when parking the car, and try
  not to hit the curb. Do not wait to have the
  alignment checked after hitting a curb or
  pothole. Take your car to a tire shop if you
  notice any sign of vibration on your steering
  wheel. Keep in mind that you should have all four
  wheels checked for alignment.

9
Few Important Do's and Don'ts for Tires to Avoid
Frequent Tire Shop Visits

• Do pay special attention to remaining tread on a
  tire. Under no circumstances should you be
  driving on tires with tread depth much below the
  recommended legal limit.
• Do ensure that you rotate your tires at regular
  intervals. You should consider the vehicle
  manufacturer's recommendation here. You have to
  keep in mind that some cars will have different
  tires in the rear and front. If that is the case,
  you usually do not need to rotate the tires, but
  it is still a good idea to ask an expert at a
  tire shop about the best way forward.
• Do pay attention to the quality of your tires.
  Ideally, you should be checking all four tires
  every second week for possible damage. Look for
  any foreign object penetrated in the tires. In
  case you find any nail or something else in the
  tire, it is better to stay away from pulling it
  out of the tire treads. Instead, you should go to
  a tire shop and ask them to repair the tire
  properly.

10
The End

• For more details, please visit
• https//autobahntires.ca/services/tire-repair/