Vertical Power VP-X Sport

1
Vertical Power VP-X Sport
2

• The VP-X Sport integrates with many popular EFIS
  products enabling you to monitor and control your
  entire electrical system on the EFIS display. In
  addition using the EFIS for attitude, navigation,
  and engine information, you now can use the EFIS
  display to monitor the health of your electrical
  system, view and control the status of individual
  circuits, and respond to circuit faults.

3

• Vertical Power offers these capabilities through
  the use of our patented electronic circuit
  breaker (ECB) technology that is at the core of
  all of our products. Of course, ECBs provide
  circuit protection like old-fashion thermal
  circuit breakers, but ECBs do a lot more than
  just detect circuit faults.

4

• ECBs are intelligent, configurable, and offer
  capabilities not otherwise available with
  old-style breakers. For example, ECBs can detect
  a burned-out landing light or disable the starter
  circuit while the engine is running.

5
(No Transcript)
6

• ECBs greatly simplify wiring while at the same
  time provide advanced electrical system
  capabilities. These capabilities include
  solid-state power switching and circuit
  protection, open circuit detection, automatic
  landing light wig-wag, pilot and co-pilot trim
  control, runaway trim protection with backup trim
  controls on EFIS, flap control with intermediate
  flap stops, starter disable when engine running,
  flap over-speed alarms, trim and flap position
  display, over-voltage protection, alternator
  control and more. These advanced features along
  with the wiring harness kit give you a
  "quick-build" wiring experience.

7
FEATURES ( Circuit breaker value can be set
from 1 amp to the max. value shown.)

• 2A Circuits 2 3A Circuits 1 5A
  Circuits 8 10A Circuits 5 15A Circuits
  3 Starter contactor circuit Pitch trim motor
  control

8
(No Transcript)
9

• Roll trim motor control Reversible flap motor
  control with braking Flap and trim position
  sensor inputs Processors 1 Power supplies
  1 Flap and trim switch inputs 6

10

• Panel switch inputs 10 Starter annunciator
  Volts 14v Main power input from battery
  contactor RS-232 interface to EFIS Ethernet
  interface to PC

11
INTERFACES

• The VP-X requires an EFIS for alarm and status
  display. The currently supported systems
  include Advanced Flight Systems 3400s, 3500s,
  4500s, 5600s Grand Rapids Technologies HX and
  Sport SX MGL Avionics Voyager/Odyssey Gen
  II/MGL Avionics Xtreme. Garmin G3X Dynon
  SkyView SV-D1000 SV-D700 (plus license fee
  charged by Dynon - Available by end of 2011)

12

• To know more information, visit us

http//www.ozpilot.com.au/