Computer Display Problems: How to Troubleshoot It? - PowerPoint PPT Presentation

About This Presentation
Title:

Computer Display Problems: How to Troubleshoot It?

Description:

Are you looking for professional help with your computer? Is it infected with viruses, spyware, adware and other malware? Burnaby Computer Repair provides all sorts of computer support: on-site and off-site troubleshooting, software repair and fixing problems with your operating system, as well as data backup and data recovery. – PowerPoint PPT presentation

Number of Views:38
Slides: 6
Provided by: computerhelp
Category: Other

less

Transcript and Presenter's Notes

Title: Computer Display Problems: How to Troubleshoot It?


1
Computer Display Problems How to Troubleshoot It?
2
Most often, our computers are usually reliable,
but there is always a possibility available when
something can go wrong. If for instance, you have
turned on your computer and nothing is displaying
on the monitor. This is one of the most common
computer problems that we face in our daily day
life. During display problems, your data is most
likely safe and this type of computer repair is
something that you can either fix by yourself or
going to need help from professionals who offer
computer troubleshooting services. The Most
Common Reasons of Display Problems Power
Supply Your monitor is obviously not going to
turn on, if it has no power. Make sure that your
monitor is plugged in to the main power supply
properly and check the monitor is switched on or
not.
3
Defective Monitor If you have done the above
step, and you are seeing a little blue/green
light on your monitor, which indicates that your
monitor is receiving power. If you are not,
jiggle the power cord of the monitor once or
twice. If the monitor suddenly comes to life,
most probably you have a faulty monitor power
cord, or the connector on your monitor is
defective. Replace the monitor coed and see if
that resolves the issue. If you still face the
same problem, then you might need to repair or
replace your monitor. Loose Video cable Your
computer CPU and monitor are connected via a
cable, called a video cable. If this cable is
loose, then your monitor is show nothing in it.
Most probably, your display will show something
like NO SIGNAL in this these types of cases.
Check the cable properly, is it tightly connected
to the both end or not? For a good measure,
disconnect the cable from both end and reconnect
it once again to try.
4
  • Hardware Problem
  • If none of the above solutions have helped you,
    then you may now very well have a problem with
    your system. Most of the steps beyond this are
    out of knowledge for average computer users. They
    need computer trouble shooting services to solve
    this. However we list them here in the hope that
    some of us may find it useful.
  • Reinstall the video card drivers.
  • Reinstall the motherboard chipset drivers.
  • Remove and then re-insert the graphic card.
  • Check the graphic drivers.
  • Use a different set of computer RAM and try.
  • Trying the basic steps to repair display problems
    is OK. If it is hardware related issue, then you
    really should call a computer trouble shooting
    service to help you. We at Burnaby Computer
    Repair serve whole Burnaby and its nearby areas
    with computer trouble shooting services. No
    matter, it is residential or commercial if you
    need computer troubleshooting services for
    Burnaby, just contact us. We are 24/7 available
    for your help.

5
4664 Lougheed Hwy City/Town-Burnaby State-British
Columbia Phone 604-438-4357 Vancouver,
Canada. Web http//www.burnabycomputerrepair.com/

Thank You
Write a Comment
User Comments (0)
About PowerShow.com