How to Troubleshoot a Xerox Phaser 8560?

1
How to Troubleshoot a Xerox Phaser 8560
2
Summery

• Troubleshooting and periodic maintenance is
  essential for any printer to ensure its smooth
  operation. Xerox includes a troubleshooting
  section on both its website and in the user
  manual for this printer. Advanced troubleshooting
  is available through the service manual of this
  series of color printers. Error codes are best
  left for technicians, however most print quality
  issues and jam preventative measures are
  something an end-user can do. Through our Xerox
  printer technical support, we have provided you
  few instructions to troubleshoot your Xerox
  Phaser 856o

3
Step1

• Remove all paper from the machine, reload paper
  from a fresh package, and try using the printer
  again. Some issues can be caused by paper
  absorbing moisture due to excess humidity.

4
Step2

• Print out a configuration report from the printer

5
Step3

• Press the up or down arrows on the control panel
  until you see "Information" displayed and
  highlighted on the display

6
Step4

• Press the "OK" button to select. Press the up or
  down arrows until "Information Pages" is
  highlighted on the display, and the press "OK" to
  continue. 

7
Step5

• se the arrows again to get to "Configuration
  Page", and then press "OK" to print it out. This
  will isolate the issue to the printer or to an
  outside source. If the issue isn't on the
  configuration page, then the problem likely
  arises from the software program or computer that
  sent the job to the printer.

8
Step6

• Open the multipurpose tray (Tray 1) by pulling
  the handle down on the front of the machine.
  Locate the large gray roller in the center of the
  tray. Use a lint-free cloth and a dash of
  lubricant to clean the roller. 

9
Step7

•  Close Tray 1. Open up Tray 2 until it reaches
  it's maximum extension. Raise it up slightly and
  pull it to free it from the machine. On the front
  of the tray is a white roller. Use a little
  lubricant on a lint-free cloth to clean the
  roller.

10
Step8

• Look under the printer in the area where the
  paper tray usually sits at. Under the frame is
  another roller. Release the orange release latch
  to drop the roller down, and clean like you did
  the others. Snap it back up when finished

11
Step9

• Press the up or down arrows on the control panel
  to scroll down to "Troubleshooting" and press the
  "OK" button

12
Step10

• Use the arrows again to scroll down to "Print
  Quality Problems," and press the "OK" button
  again. If you're experiencing lighter stripes or
  lines coming down the prints, use the arrows to
  scroll down to "Eliminate Light Stripes," and
  press the "OK" button.

13
Step11

• You may need to run this two to three times to
  remove the stripes. If you're having print
  smears, scroll down instead to "Remove Print
  Smears," and press the "OK" button

14
Step12

• Replace the maintenance kit if you're still
  having problems. Call a technician if you're
  still having jamming problems or if the
  maintenance kit doesn't resolve your print
  quality issues.

15

• Follow these steps and troubleshoot your Xerox
  Phaser 856o.In case you have any issue contact
  our tech support experts by dialing Xerox printer
  support NZ. We will solve your any kind of
  printer issue and provide you best solution.

16
Contact Us

• If you need any kind of Tech help contact
• Xerox printer Support Number
• 64-48879116
• Original source
• http//bit.ly/2gV5b3V