References

1
References

• GENERAL REFERENCES ON TRANSMISSIONS
• Automotive Handbook, Bosch, IV ed., 1996.
• U. Kiencke, L. Nielsen, Automotive Control
  Systems, Springer, 2000.
• B. Jacobson, Automotive Power transfer
  Management Lecture Notes, Chalmers University in
  Sweden, 2000, available at http//www.mvd.chalmers
  .se/beja/
• M. Link, B. Vob, E. Eggert, R. Nasdal, The
  Automated Shift Transmission - Possibilities and
  Limits in Production-Type Vehicles, SAE
  2001-01-0881
• G.Wagner, Application of Transmission Systems
  for Different Driveline Configurations in
  Passenger Cars, SAE 2001-01-0882

2
References

• AUTOMATED MANUAL TRANSMISSION - Control (1)
• L. Glielmo, F. Vasca, Optimal Control of Dry
  Clutch Engagement, SAE 2000-01-0837.
• L. Glielmo, F. Vasca, Engagement Control for
  Automotive Dry Clutch, American Control
  Conference, 2000.
• F. Garofalo, L. Glielmo, F. Vasca, "Smooth
  Engagement for Automotive Dry Clutch'', IEEE
  Conference on Decisions and Control, USA, 2001
  (submitted to).
• A. Bemporad, F. Borrelli, L. Glielmo, F. Vasca,
  "Hybrid Control of Dry Clutch Engagement'',
  European Control Conference, Spain, 2001.
• A. Bemporad, F. Borrelli, L. Glielmo, F. Vasca,
  "Optimal Piecewise-Linear Control of Dry Clutch
  Engagement'', IFAC Workshop Advances in
  Automotive Control, Karlsruhe, Germany, 2001
• J. Fredriksson, B. Egardt, Nonlinear Control
  applied to Gearshifting in Automated Manual
  Transmission, IEEE CDC01, Sidney, Australia,
  444-449
• B. K. Powell, K. E. Bailey, S. R. Cikanek,
  Dynamic Modeling and Control of Hybrid Electric
  Vehicle Powertrain Systems, IEEE Control Systems
  Magazine, Oct. 98, 17-33
• A. Szadkowski, R. B. Monford, Clutch Enagement
  Simulation Engagement Without Throttle, SAE
  920766, 103-117

3
References

• AUTOMATED MANUAL TRANSMISSION - Control (2)
• G. Ercole, G. Mattiazzo, S. Mauro, M.
  Velardocchia, F. Amisano, R. Flora, Co-operating
  Clutch and Engine Control for Servoactuated
  Shifting through Fuzzy Supervisor, SAE
  1999-01-0746, 101-109
• J. M. Slicker, R. N. K. Loh, Design of Robust
  Vehicle Launch Control System, IEEE Trans. On
  Control System Technology, vol. 4 no. 4, 1996,
  326-335
• K. Pfeiffer, R. Isermann, Automatic Control of
  Vehicle Startup for Emission Tests on Engine
  Dynamometers, Americn Control Conference,
  Washington, 1995, 2596-2600
• H. D. Lee, S. K. Sul, H. S. Cho, J. M. Lee,
  Advanced Gear Shifting Clutching Strategy for
  Parallel Hybrid Vehicle with Automated Manual
  Transmission, IEEE IAS, 1998, 1709-1714
• F. Amisano, G. Serra, M. Velardocchia, Engine
  Control Strategy to Optimize a Shift Transient
  During Clutch Engagement, SAE 2001-01-0877
• C. Bader, Powertrain Electronics - Progress on
  the Use and Development of the Computer Aided
  Gearshift Systems, SAE 901160

4
References

• AUTOMATIC TRANSMISSION
• B. Moir, An investigation into objective
  measures of gear-shift quality, Proc. Instn Mech
  Engrs, vol 209, part D Journal of Automobile
  Engineer, 1995, 245-258
• A. Haj-Fraj, F. Pfeiffer, Optimization of Gear
  Shift Operations in Automatic Transmissions,
  IEEE AMC2000, Nagoya, 469-473
• K. Hayashi, Y. Shimizu, Y. Dote, A. Takayama, A.
  Hirako, Neuro Fuzzy Transmission Control for
  Automobile with Variable Loads, IEEE Trans. On
  Control Systems Technology, vol. 3 no. 1, 1995,
  49-53
• T. Minowa, T. Ochi, H. Kuroiwa, K. Z. Liu,
  Smooth Gear Shift Control Technology for
  Clutch-to-Clutch Shifting, SAE 1999-01-1054
• F. Jauch, Model-Based Application of a
  Slip-Controlled Converter Lock-Up Clutch in
  Automatic Car Transmissions, SAE 1999-01-1057
• L. Mianzo, A Transmission Model for
  Hardware-in-the-loop Powertrain Control System
  Software Development, IEEE CCA 00, Anchorage,
  Alaska, 2000

5
References

• TRANSMISSIONS - Actuators
• Y. Esenovsky-Lashkov, D. Polyak, New concept of
  automatic control for a passenger car clutch,
  Proc. Instn Mech Engrs, vol 210, part D Journal
  of Automobile Engineer, 1996, 227-233
• Q. Zheng, K. Srinivasan, Transmission Clutch
  Pressure Control System Modeling, Controller
  Development and Implementation, SAE 2000-01-1149
• P. A. Christensen, Using CAE Simulation Tools to
  Study the Performance of a 2-Stage Variable Force
  Solenoid Acting on a Clutch, SAE 2000-01-0116
• AUTOMATED MANUAL TRANSMISSION - Clutch
  characteristics
• D. Centea, H. Rahnejat, M. T. Menday, The
  influence of the interface coefficient of
  friction upon the propensity to judder in
  automotive clutches, Proc. Instn Mech Engrs, vol
  213, part D Journal of Automobile Engineer, 1999,
  245-258
• H. Drexl, U. Teichert, M. Dettmar, Clutch Wear
  Analyzing Technology a Tool for Longer Clutch
  Life, SAE 982848
• M. Velardocchia, F. Amisano, R. Flora, A Linear
  Thermal Model for an Automotive Clutch, SAE
  2000-01-0834

6
References

• CONTINUOUSLY VARIABLE TRANSMISSION
• E. Spijker, Steering and Control of a CVT Based
  Hybrid Transmission for a Passenger Car, Ph.D.
  Thesis, Technical University of Eindhoven, 1994
• B. Zhang, H. Wang, J. Li, Study on Cruise Fuzzy
  Control for CVT Vehicle, Intern. Symposium on
  Advanced Vehicle Control, Ann Arbor, Michigan,
  2000
• B.G. Vroemen, A.F. Serrarens, F.E. Veldpaus, CVT
  Control a Hierarchical Approach, Intern.
  Symposium on Advanced Vehicle Control, Ann Arbor,
  Michigan, 2000
• W. Hongyan, Z. Yunshan, Z. Boying, Q. Xiding,
  Research on Integrated Control Strategy of CVT
  for Passenger Cars, IEEE International Vehicle
  Electronic Conference, 1999
• S. Liu B. Paden, A Survey of Todays CVT
  Controls, Conference on Decision Control, San
  Diego, California, 1997
• B. Powell, X. Zhang, R. Baraszu, Computer Model
  for a Parallel Hybrid Electric Vehicle (PHEV)
  with CVT, American Control Conference, Chicago,
  Illinois, 2000
• B. Jacobson, Automotive Power transfer
  Management Lecture Notes, Chalmers University in
  Sweden, 2000, available at http//www.mvd.chalmers
  .se/beja/