WG12 Opening Plenary

1
SC4 Closing PlenaryWG12 Report
Parksville, Canada TC184/SC4/WG Meetings
2009/05/22 Keith A. Hunten, P.E. WG12 Convener
2
WG12 Review Progress

• Documents reviewed by Convener this week
• Completed review of AP239E2 WG12 modules
• Documents received for review this week
• None.

3
WG12 and SC4 SEDS Progress

• SEDS (10303)
• 120 SEDS closed
• All SEDS closed or left intentially open for
  AP203E2, AP210E2, AP233, and AP239E2
• SEDS (Other)
• Ran out of time to process the remaining backlog
• Will process those by email and telecon

4
WG3/WG12 Modules/AP Coordination Update for Week

• Further actions needed in support of modular
  development process
• Updated on changes to Modular Indices in HTML AP
  presentation done by AP239E2 team
• ISO 10303-1000 status ready to roll
• Modular AP Status
• AP203E2, AP209E2, AP210E2, (AP214), AP221, AP233,
  AP236, AP239, AP241
• Managing WG3/WG12 Ns
• WG12 Decided to keep as is, WG3 will attempt to
  implement
• AP214 Modularization Status
• It has been agreed that work going forward will
  be modular, and that 203 and 214 work should be
  merged into a single AP though some political
  details remain to be addressed
• PDQS modules status
• Changes to modules to accomplish this were agreed
  to
• Re-structuring of geometric modules with Shape
  committee discussed
• Approach for publishing Usage Guide for Gears was
  agreed upon
• Document to be as close as possible to an AP
  document structure
• New conformance classes shall not be introduced.
• Will use the 10303-5000 series number
• SC4 Resolution will replace 757 from Busan
• Continued the closing of SEDS

5
WG12 Update for Week

• ISO 22745 eOTD Cataloguing status presented
• 2D/3D Mapping
• Approach discussed and agreed upon
• Assembly GDT
• Agreed that current AP203E2 GDT modules to go
  out as is, and a two phase approach to
  implementation be pursued
• Phase one (underway) will be completing
  requirements definition and prototype
  implementations
• Phase two will be formal update of existing and
  creation of new modules and publishing them and
  an updated AP203E2 using the Part 1000 process
• The geometric modeling issues from Thurman
• Basic curve, constructive solid geometry 2d,
  Manifold_surface, constructive solid geometry 3d,
  Physical_unit_3d_design_view, Solid_model
• Solutions discussed and agreed upon
• Contextual_shape_positioning module now brings in
  more modules that wanted
• Agreed to a new module and restructuring to
  resolve the issues
• Completed the closing of 120 SEDS