Occupational Health Safety and Welfare - PowerPoint PPT Presentation

1 / 40
About This Presentation
Title:

Occupational Health Safety and Welfare

Description:

Look for the handy illustration and compare your office ergonomic set up ... and go to Ergonomics Screen based workstations. UniSA. First Aid ... – PowerPoint PPT presentation

Number of Views:204
Avg rating:3.0/5.0
Slides: 41
Provided by: julie114
Category:

less

Transcript and Presenter's Notes

Title: Occupational Health Safety and Welfare


1
Occupational Health Safety and Welfare
  • Occupational Health Safety and Welfare Induction
  • University of South Australia

2
Welcome to the University of South Australia
  • The purpose of this session is to
  • assist you in managing your
  • Occupational Health, Safety
  • and Welfare as a member of
  • the University community

3
Contents
  • Legislation - The Occupational Health Safety and
    Welfare Act, 1986
  • The University of South Australias Occupational
    Health Safety and Welfare (OHS) policy and
    related procedures
  • Employee and Employer responsibilities under the
    OHSW Act
  • Supervisors and Managers
  • Regular Inspections of the Workplace

4
  • Continued...
  • Safe Operating Procedures (SOPs)
  • Material Safety Data Sheets (MSDSs)
  • Resolution of Occupational Health Safety and
    Welfare issues
  • Hazards - Identify, Assess, Control
  • Hierarchy of controls
  • Health and Safety representatives
  • Health and Safety Committees
  • Accident and Incident Reporting
  • and Investigation

5
  • Continued...
  • Workers Compensation
  • Rehabilitation
  • Manual Handling
  • Ergonomic Assessment
  • First Aid
  • Emergencies
  • Disaster Management Plan

6
Legislation and University Policy
  • The Occupational Health Safety and Welfare Act,
    1986. The aim of the Act is to protect workers
    at work by promoting a culture of safety
    awareness. Fines for breaches of this Act are
    outlined within the document. The Act is
    mandatory and must be complied with.
  • The University policy on Occupational Health
    Safety and Welfare can be accessed via the
    Universitys home page http//ohsw.unisa.edu.au/m
    ain/system/index1a.htm

7
  • Regulations under the Act are mandatory
    requirements
  • Employees and employers can be fined under the
    OHSW Act, 1986
  • Maintaining a safe working environment reduces
    the risk of accidents that cost not only the
    University but also individuals
  • Make time for your Regular Inspections

8
  • Codes of Practice under the Act provide practical
    guidance on how a health and safety standard can
    be achieved. These are mandatory requirements
    and should be followed. Minimum standards are
    stated and if there is another solution which
    achieves the same or better standard of health
    and safety it may be used

9
Employer and Employee Responsibilities
  • Duties of employers is outlined under
  • Section 19 of the OHSW Act 1986.
  • The employer shall provide-
  • a safe working environment
  • safe systems of work
  • plant and substances in safe condition

10
  • Duties of employees is outlined under Section 21
    of the OHSW Act 1986
  • The employee shall take reasonable care-
  • to protect his or her own safety at work
  • avoid adversely affecting the health and safety
    of any other person through any act or omission
    at work, and
  • use any equipment provided for health and safety
    purposes
  • obey any reasonable instruction that his or her
    employer may give in relation to health and
    safety at work

11
  • continued...
  • comply with any policy published or approved that
    applies at the workplace
  • ensure that he or she is not, by the consumption
    of alcohol or a drug, in such a state as to
    endanger his or her own safety at work or the
    safety of any other person at work

12
Supervisors and Managers
  • In addition to the responsibilities that we all
    share, supervisors and managers are to provide
    adequate information, training and supervision to
    those for whom they have responsibility
  • Changes to the workplace or systems of work
    require consultation with those the changes may
    effect

13
Regular Inspections of the Workplace
  • Regular Inspections of the Workplace are designed
    to identify hazards, including those in work
    processes, for assessment and control to maintain
    a safe environment
  • Inspections should be carried out on a regular
    basis and form part of the documentary evidence
    needed to maintain the exempt employer status of
    the University. This
  • saves money too!

14
  • Inspections are carried out by a team who
    complete the checklist and identify hazards for
    correction
  • Inspections are carried out annually in low risk
    areas and more frequently where specific risks
    are identified
  • It is the responsibility of staff in the area
    inspected to take remedial action

15
Managers/Supervisors
  • Staff in a supervisory capacity are required to
    ensure that Regular Inspections are carried out
    and that appropriate remedial action is undertaken

16
Health and Safety Inspection Check List
  • You will find procedures for Regular Inspections
    on the University Home Page under Occupational
    Health and Safety, Procedures and Guidelines
  • Download the Health and Safety Inspection Check
    List from
  • http//ohsw.unisa.edu.au/resources/ohsw/forms/ohs
    w41.doc

17
  • Regular Inspections provide a means for you to
    measure your OHS performance. Keep records
  • Complete the checklist and dont forget to
    identify who will be responsible for correcting
    identified hazards

18
Safe Operating Procedures (SOPs)
  • Where a specific hazard exists it may be
    appropriate to have safe operating procedures
    clearly described and posted close by so as they
    can be easily read and understood
  • International signage is useful
  • where there may be difficulty in
  • communication

19
Safe Operating Procedures
Safe Operating Procedures
  • DONT rely on verbal information for it may not
    be received by all who need it. Document all
    information
  • Procedures should be
  • reviewed at inspection time

20
Material Safety Data Sheets (MSDSs)
  • MSDSs are supplied by the manufacturer
  • of a product. A manufacturer is required to
    provide them to the purchaser
  • Every chemical substance in the workplace should
    have a printed MSDS from the manufacturer to
    inform the user of the nature of the product in
    use
  • Chemwatch information may not be available when
    needed so hard copies of the information must be
    kept where they are easily accessed

21
  • The MSDS provides valuable information on
  • what the formula is, its appearance, odor and
    use
  • permissible exposure limits (PEL)
  • monitoring and measurement procedures
  • health hazard information
  • exposure effects
  • emergency first aid
  • personal protection
  • leak/spill procedures
  • waste disposal
  • storage

MSDS
22
Resolution of OHS issues - steps
  • 1. Initially the OHS issue should be discussed
    with your supervisor
  • 2. Should the supervisor not be able to assist,
    the matter should be referred to your Health and
    Safety Representative
  • 3. The Health and Safety Representative should
    then discuss the matter with your Supervisor
  • 4. If the matter remains unresolved
  • it can then be referred to the
  • Occupational Health and Safety
  • Committee on campus for resolution

23
Hazards
  • Three basic steps
  • 1. Identify
  • 2. Assess
  • 3. Control
  • By completing the inspection checklist you should
    have identified any hazards in your work area
  • The risks associated with these hazards are
    assessed by using a table

24
Risk Assessment Table
25
Assessing Risk
Use the table as follows 1. Rank the risk by
probability - the likelihood of the hazard
resulting in injury, illness, damage or
loss 2. Rank the risk by consequence - the
potential for injury, illness, damage or
loss 3. Prioritise the risk for control -
indicate the ranking of importance when control
measures are to be implemented 4. Document the
process
26
What now?
  • Now that the risk has been identified and
    assessed by the inspection team decisions need to
    be made about how best to eliminate the risk. If
    this is not possible the aim is to reduce the
    risk as much as possible
  • The following hierarchy of controls provides the
    steps to making the right decisions in this
    process

27
Hierarchy of Controls
  • 1. Eliminate the hazard
  • at its source
  • 2. Substitute for something less hazardous
  • 3. Isolate the hazard by total containment of the
    process
  • 4. Engineering controls
  • 5. Safe Work Procedures and
  • Administrative controls
  • 6. Personal Protective Equipment (PPE)

28
Health and Safety Representatives
  • Health and Safety (HS) Representatives represent
    work groups for OHS matters. They are elected
    under the Act for a three year term
  • Once elected HS representatives have statutory
    powers under the Act which enable the
    representative to take appropriate action should
    there be an unsafe work condition evident
  • Training, five days per annum, is provided for
    HS representatives under the legislation

29
Health and Safety Committees
  • Each campus has an OHS Committee.
  • The committees meet
  • on a regular basis to
  • resolve OHS issues
  • The committees are formed by the election of a
    HS representative and nomination of management
    representative to each work group, creating a
    balance of employee and employer members

30
Accident and Incident Reporting and Investigation
  • Accidents and Incidents should
  • be reported within 24hours
  • Supervisors are responsible for the follow up and
    investigation of all incidents and accidents and
    are required to forward the accident, incident,
    hazard form to the OHS consultant
  • Accident/Incident forms can be printed from here
  • http//ohsw.unisa.edu.au/forms/ (OHSW9)

31
Workers Compensation and Rehabilitation
  • The University complies with the Workers
    Compensation and Rehabilitation Act, 1986
  • The University policies on Workers Compensation
    and Rehabilitation are available from the OHSW
    Home Page
  • http//ohsw.unisa.edu.au/main/system/index1.htm

32
Lodging a Workers Compensation claim
  • If you are making a claim for workers
    compensation you will need to complete the Worker
    Report Form. (If you havent done so, an
    accident incident form should also be forwarded
    to the OHS consultant)
  • Workers Compensation claims are determined by
    Unisure (not WorkCover) as the University is an
    exempt employer under WorkCover. (In other words
    the University manages its own risk)

33
Manual Handling
  • Training in manual handling is available
    internally or externally to the University
  • Training is recommended for any person who is
    required to perform manual handling duties as
    part of their work
  • Manual handling information is available as a
    Regulation and Code of Practice
  • Contact your OHS consultant for more information

34
Ergonomic Assessment
  • The procedure for users of keyboard and screen
    based equipment is available from the
    Universitys home page under Codes, Guidelines
    and Procedures. Look for the handy illustration
    and compare your office ergonomic set up
  • http//ohsw.unisa.edu.au/main/pubs/index1.htm
  • and go to Ergonomics Screen based workstations

35
First Aid
  • The University maintains a corps
  • of trained first aid personnel on
  • each campus
  • First aid personnel are responsible for
    maintaining the kits to comply with the current
    Code of Practice and keeping records of all
    illnesses, injuries and treatments given. The
    date, time, and name of the client must be
    recorded. Records are kept for a minimum of
    seven years
  • Security personnel are trained in first aid and
    can be called if you are unable to locate your
  • first aid officer

36
Emergencies
  • Make note of emergency numbers by completing the
    information sheet. Keep it by the phone
  • health and safety representative
  • first aid officer
  • security
  • ambulance
  • Be familiar with evacuation procedures and
    muster points for your area
  • Obey directions of fire wardens and DO NOT enter
    buildings if alarms are sounding

37
  • Ambulances called to the campus should be
    directed by Security to the person requiring
    assistance. Please help by notifying Security on
    extension number 88888 and tell them where you
    are
  • A person calling an ambulance will not be
    charged, the client is charged
  • Medical practitioners are not available on
    campus. The OHS consultant will be able to
    advise where services are available

38
Disaster Management Plan
  • A copy of the University Disaster Management
    Plan is held by Heads of Schools and Managers of
    Units. If you wish to view this document please
    contact the relevant person in your area

39
What This Means
  • Everyone has a responsibility to themselves and
    others to ensure a safe work environment
  • Accidents and incidents must be reported and
    investigated with corrective action taken to
    prevent a reoccurrence
  • Regular Inspections must be carried out to enable
    the University to retain its exempt employer
    status and maintain a safe work environment

40
Last but not least...
  • Thank you for viewing this presentation You have
    now been provided basic information to get you
    started
  • Direct any questions you have to the OHS
    consultant
  • Please advise the OHS consultant that you have
    completed this training for the Universitys
    records by completing and forwarding the
    questionnaire to
  • OHS Consultant
  • Human Resources
  • City East

THE END
Write a Comment
User Comments (0)
About PowerShow.com