Unist Australia Pty Ltd. - Cutting Oils

1
johnbarker_at_unist.com.au www.unist.com.au
2

• Metal Cutting Solutions
• Machining Cutting Get more by using less!!
• There is the OLD way and then there is the NEW
  way, the old way uses mineral oils mixed with
  water which are then called metalworking fluids.
• Unist Australia eliminates the OLD way (flood
  coolant) and replaces it with a cost effective
  alternative.We dont use metal working fluids we
  use a CUTTING OIL.

3

• Uni-Max Revolution Saves You Money!
• The Uni-Max Revolution not only improves the
  efficiency of your CNC machines, but also your
  bottom line.
• Unist systems routinely eliminate the need for
  flood coolant while also significantly increasing
  tool life and feed rates.

4

• Uni-Max Revolution M-Codes
• Designed to be programmed from M-codes, the
  Uni-Max Revolution allows the operator to
  precisely control the amount of fluid being
  dispensed for each job.
• Featuring two independently controlled fluid
  applicators and an air blow-off nozzle for chip
  removal, the Uni-Max Revolution allows you to
  dispense the lubricant exactly where needed, in
  the amount needed - down to 0.20 ounces (6mL) per
  hour.

5
Coolubricator The perfect MQL metal cutting
companion. With MQL, individual metal cutting
applications each have their own "sweet spot" or
precise amount of fluid necessary for optimum
efficiency. Too little fluid, or too much fluid
and tool life can suffer and fluid can be wasted.

• Reduces fluid usage
• Promotes a clean and
• safe work environment
• Prolongs tool life

• Improves cut quality
• Made for environmentally
• friendly Coolube
• Dry chips - higher recycling value

6

• Uni-Max Revolution Saves You Money!
• Separate Air Fluid is the key to delivering
  consistent atomization and fluid distribution
  over extended lengths of supply tubing.
• This is where the patented Unist Co-Axial Nozzle
  steps in. Fluid and air are kept separate until
  they are combined at the nozzle tip.

7
Unist Australia Pty Ltd. Contact Today 7
Bendtree Way, Castle Hill, NSW 2154,
Australia? Ph no 02 8850 2022 johnbarker_at_unist.co
m.au www.unist.com.au