Title: LAN design
1LAN design
- CCNA Exploration Semester 3
- Chapter 1
2Topics
- Networks and business needs
- The 3-level hierarchical network design model
- Including voice and video over IP in the design
- Devices at each layer of the hierarchy
- Cisco switches for each layer
3Semester 3
4Hierarchical design model
5Hierarchical design model
High speed backbone.
6Hierarchical design model
Subnets, VLANs, routing, flow control, security.
7Hierarchical design model
Connects end devices. Controls which devices
connect.
8Collapsed core
- Small network merged core and distribution
9Logical and physical layout
- Logical how they connect.
- Physical where they are.
- Logical connections not obvious from looking.
10Benefits of Hierarchical Network
- Scalability easy to expand
- Redundancy at core and distribution layers
- Performance route packets through fast devices
- Security at access and distribution layers
- Manageability similar functions within layer
- Maintainability - modular
11Design principles
- Network diameter how many devices must packet
pass through? Keep it low. - Bandwidth aggregation combine ports where high
bandwidth is needed. - Redundant links/devices in core and
distribution layers. Too expensive for access. - Start design at the access layer. How many
devices, how much bandwidth needed?
12Converged network
- Combines data, voice, video.
- (Not converged as in all routers have consistent
information. Same word used.) - Needs quality of service (QoS) to give priority
to voice and video. - Was very expensive, needed expertise, needed to
replace legacy equipment. - Now more affordable.
13Advantages of converged network
- One network to manage/ keep up to date
- One set of cabling and networking devices
- One group of people to run it
- One service provider
- Can have voice and video on PC using headset,
webcam and software no separate equipment.
14Choosing switches
- Carry out Traffic Flow Analysis using software to
monitor amount and source of traffic. Allow for
growth. - Carry out User Communities Analysis. Group by job
function. How many ports? How much bandwidth?
Allow for growth. - Carry out Data Stores and Data Servers analysis.
Traffic to, from, between.
15Topology Diagram
Ports?Bandwidth?Bottlenecks?
Layers?Routes?Redundancy?
16Topology Diagram
Ports?Bandwidth?Bottlenecks?
Layers?Routes?Redundancy?
17Choosing switches (contd)
1 rack unit (1U)
- Form factor
- Fixed configuration ports on chassis
- Modular ports on cards
- Stackable act as one switch, linked by special
ports.
18Choosing switches (contd)
- Port density how many ports? (Allow for links
between switches.) - Forwarding rate How many Gbps can it process?
Can all ports work simultaneously at maximum
speed? - Link aggregation (EtherChannel) up to 8 ports
bound together, acting as one, with combined
bandwidth can it do this?
19Choosing switches (contd)
- Power over Ethernet (PoE) for IP phones, network
access points. Do you need it? It adds to the
cost. - Multilayer switch needed? Typical switch works at
Data Link layer (2), uses MAC addresses.
Multilayer also works at Network layer (3),
routes between subnets.
20Access Layer Switch Features
- Port security choose which devices may connect.
All Cisco switches support this. - VLANs connected devices on different subnets.
- Speed Fast Ethernet (100Mbps) or Gigabit.
- Power over Ethernet (PoE) expensive
- Link aggregation for uplinks
- Quality of service (QoS) if needed
21Distribution Layer Switch Features
- Layer 3 support route between VLANs
- High forwarding rate (processing)
- Port speed Gbps, 10Gbps ports
- Redundancy
- Security Access control lists
- Link aggregation
- Quality of service
- Availability. Hot swappable power supply?
22Core Layer Switch Features
- Support for Network layer (3) - routing
- Very high forwarding rate
- Very high port speed (1Gbps, 10Gbps)
- Redundancy
- Link aggregation
- Quality of service
- Avoid security and other distractions here. Go
for speed.
23Catalyst Switch product lines
24Catalyst Switch product lines
25