Hide this slide during your presentation

1
Administrative Notes
Click on the Slide Show icon to rehearse the
presentation with animation and present your class
Hide this slide during your presentation
2
AN/PEQ-2A
3
Terminal Learning Objective

• ACTION- Qualify with the AN/PEQ-2A
• CONDITIONS- During hours of darkness, given an
  M16A1/A2/A4, M4 Carbine, M4 Modular Weapon
  System, M249 SAW, M60 machinegun, M240B machine
  gun or M2 machine gun, Night vision device (NVD),
  AN/PEQ-2A, Qualification range, qualification
  scenario, 25Meter offset, 10m borelight offset
  and the appropriate number of rounds for the
  weapon being zeroed and qualified IAW the
  corresponding FM.
• STANDARDS- Answer at least 14 of 20 questions on
  a written test qualify M16A1/A2/A4, M4 carbine
  and MWS at least 17 out of 40 M249, M60 and
  M240B at least 6 out of 11 on transition range
  IAW TM 11-5855-308-12P

4

• Safety Requirements Classroom Environment
• Risk Assessment Low
• Environmental Considerations None
• Evaluation All instruction is testable and will
  be included on the General Subjects Examination
  to include the written exam and the performance
  evaluation
• Instructional Lead-In

5
Agenda
1. CHARACTERISTICS 2. PMCS 3. PUT INTO
OPERATION 4. ZEROING PROCEDURES 5. FIRING
TABLES AND STANDARDS 6. PRACTICAL EXERCISE 7.
PERFORMANCE EVALUATION 8. WRITTEN TEST 9. FIELD
FIRE 10. PRACTICE QUAL. AND QUALIFICATION
6
Enabling Learning Objective A

• Action Identify Characteristics of the AN/PEQ-2A
  
• Conditions Given 4 (AA) batteries, a NVD and an
  AN/PEQ-2A
• Standards Identify the six characteristics and
  the six components of the AN/PEQ-2A. IAW TM
  11-5855-308-12P

7
CHARACTERISTICS
DANGER INVISIBLE LASER RADIATION - AVOID DIRECT
EXPOSURE TO THE BEAM
25 METER DANGER AREA IN DUAL LO 220 METER
DANGER AREA IN TACTICAL MODE TRAINING MODE LO
IS EYESAFE LO mode magnification not eye safe
8
CHARACTERISTICS AN/PEQ-2A

• DESCRIPTION INFRARED AIMING POINT
• (STEADY BEAM)
• LENGTH 6.4 in
• WEIGHT 7.5 oz
• BATTERY LIFE DEPENDANT ON MODE SELECTION
  OPERATIONAL USE AND AMBIENT TEMPURATURE.

• RANGE BEYOND 600 METERS.

Actual range depends on light levels and night
vision device used for observation.
9
CHARACTERISTICS
POWER LED
MOUNTING SCREW
SAFETY BLOCK
BATTERY COMPARTMENTS - 2 - AA
10
CHARACTERISTICS
ILLUMINATOR LENS CAP
ILLUMINATOR
AIMING LASER
AIMING LASER LENS CAP
11
CHARACTERISTICS
TRAINING EXTENDER
M4/M16A2 BRACKET ASSEMBLY
BRACKET ADAPTER
X 5
Pattern Generator
12 25 REMOTE
INSIGHT RAILGRABBER
PICATINNY RAILGRABBER
RETAINER STRAPS
12
CHARACTERISTICS
Optical Instrument Reticle (OIR) / Pattern
Generator
(3)

• Remove Filter Cap from aiming laser
• Install Optical Instrument Reticle (OIR) or
• pattern generator

13
CHARACTERISTICS

• 5 Patterns
• Circle
• ½ moon
• Square
• Cross
• Triangle

Optical Instrument Reticle (OIR) / Pattern
Generator
14
CHARACTERISTICS
Mounting Systems
15
CHARACTERISTICS
M4/M16A2 Bracket Assembly
16
CHARACTERISTICS
Insight Rail Grabber
Locking Clamp
You must tool tighten the slot in the screw to
tighten the rail grabber Tighten during initial
mounting Retighten after the first 3 round shot
group
17
CHARACTERISTICS
Picatinny Rail Grabber
Locking Clamp
You must double click the Torque Limiting
Knob Tighten during initial mounting Retighten
after the first 3 round shot group
18
CHARACTERISTICS

• 0 Off
• Aim LO
• Dual LO
• Aim HI
• Dual LO/HI
• Dual HI/HI

Training Mode Blue
Tactical Mode Black
1. Eye safe 2. Eye safe beyond 25m 3-5. Eye safe
beyond 220m
1 When used with binos, glasses, 3x extender or
any other magnification is not eye safe
19
CHARACTERISTICS
PUSH BUTTON SWITCH HOLD ON DOUBLETAP
CONTINUOUS ON TAP AGAIN TO TURN OFF MODE
SELECTOR MUST BE ON TO ACTIVATE PUSH BUTTON
SWITCH
Near targets/low illumination
TRAINING MODES
Remote works in same manner as push button switch
20
CHARACTERISTICS
ALL ADJUSTERS 1 CLICK 1 cm AT 25 METERS
AIMING POINT ADJUSTERS ILLUMINATOR
ADJUSTERS MECH ZERO FULL CW, BACK 5.5
TURNS DO NOT OVER TURN ADJUSTERS
TOP/BOTTOM ELEVATION SIDE WINDAGE
CW TO STOP 5.5 TURNS CCW FRONT FLANGE
21
CHARACTERISTICS
Right side mounted UP/LEFT CCW
22
CHARACTERISTICS
Top side mounted UP/RIGHT CW
23
CHARACTERISTICS
UNZEROED
ZEROED ILLUMINATOR
AIMING POINT ILLUMINATOR
AIMING POINT FILTER - SMALLER REFINED
ILLUMINATOR FILTER - EXPANDS DISPERSES
WARNING SIGNATURE INCREASED WITH NVDS IN
SMOKE, RAIN AND FOG ZERO
YOUR ILLUMINATORS
24
Enabling Learning Objective B

• Action Perform PMCS on the AN/PEQ-2A
• Conditions Given an AN/PEQ-2A, NVD, DA 2404,
  Pencil, lens paper, 4 AA batteries and TM
  11-5855-308-12P
• Standards Perform PMCS IAW TM 11-5855-308-12P
  w/in 5 minutes

25
PMCS on the AN/PEQ-2A
Dirt - Remove any lose dirt and wipe off
outer case Damage - Broken casing or Broken
lens Moisture - look through lenses for
condensation or wetness Inspect battery caps
Caps present Threads clear 0-rings present
Battery fresh
O-rings waterproof the AN/PEQ-2A Ensure lens caps
are not cracked or missing
26
PMCS TROUBLE SHOOTING

• PUSHED REMOTE SWITCH, WONT COME ON
• TURNED ON SELECTOR SWITCH WONT COME ON
• AN/PEQ-2A WONT STAY ON CONTINUOUSLY
• TOO MUCH BLOOMING ON ZERO TARGET
• AIMING LIGHT TOO DIM DOWN RANGE
• ILLUMINATOR IS NOT ON
• YOU CAN SEE TWO AIMING POINTS DOWN RANGE
• IN DUAL LO YOU CANT FIND THE ILLUMINATOR
• ILLUMINATOR DOESNT ILLUMINATE AIMING POINT
• IN AIM LO YOU GET TWO AIMING POINTS

8. YOU NEED TO REMOVE THE ILLUMINATOR
FILTER OR REDUCE THE ILLUMINATOR SIZE
3. YOU DIDNT DOUBLE TAP THE ACTIVATOR SWITCH
4. NEED TO INSTALL AIMING POINT FILTER
5. YOU NEED TO REMOVE THE AIMING POINT FILTER
9. YOU NEED TO ZERO THE ILLUMINATOR
10. YOU NEED TO CLEAN THE AIMING POINT LENS
6. YOUR NOT IN DUAL LO
2. DIDNT PUSH ACTIVATOR SWITCH
1. SELECTOR LEVER IS OFF
7. YOU NEED TO EXPAND THE ILLUMINATOR
27
Enabling Learning Objective C

• Action Put the AN/PEQ-2A into Operation
• Conditions Given an AN/PEQ-2A, NVD, 4 AA
  batteries, selected weapon, and proper zero
  offsets for the selected weapon combination
• Standards Put the AN/PEQ-2A into Operation IAW
  TM 11-5855-308-12P

28
AN/PEQ-2A into OperationMOUNTING
MOUNTING RAIL
M4/M16A2 BRACKET
29
AN/PEQ-2A into OperationMOUNTING
30
AN/PEQ-2A into Operation M16A4 and Modular
Weapon System
Zero Retention Must use the same notch Rail
Grabber Rail only
Top or right mount Remove heat shield Push in on
detent and slide off adapter rail
31
(No Transcript)
32
OPERATION 249
With Integrated Feed Tray Cover (IFTC)
Mount Rail Grabber To IFTC Mount AN/PEQ-2A
on Rail Grabber
Mount between Notches T-11 through T-15
NOTE TIGHTEN RAIL GRABBER UNTIL IT CLICKS TWICE
OR USE SLOT TO TIGHTEN
33
OPERATION 240B
Laser off and install batteries Mount rail
grabber on AN/PEQ-2A (Use slot) Mount rail
grabber onto Picatinny rail
Mount between Notches T-3 through T-12
or
NOTE TIGHTEN RAIL GRABBER UNTIL IT CLICKS TWICE
OR USE SLOT TO TIGHTEN
34
OPERATION
M16A2 bracket assembly and Insight rail grabber
only
35
AN/PEQ-2A WITH MILES BRACKET
36
STORAGE CONFIGURATION RETURN AN/PEQ-2A
Remove Batteries Rail Grabber tightened Put all
of the accessories back into the bag Remove
filters from illuminator and aiming point Return
AN/PEQ-2A back into bag
37
Enabling Learning Objective D

• Action Boresight the AN/PEQ-2A
• Conditions Given a selected weapon with an
  AN/PEQ-2A, 5 (AA) batteries, borelight, stable
  platform, NVGs and offset for AN/PEQ-2A on
  selected weapon
• Standards Correctly Zero the Borelight and
  Boresight the AN/PEQ-2A IAW TM 11-5855-308-12P

38
BORESIGHTM16/ M4 SERIES
STABILIZE WEAPON (CRUCIAL) ZERO
BORELIGHT BORESIGHT AIMING POINT WITH
NVGs BORESIGHT ILLUMINATOR WITH NVGs (NARROW
BEAM)
39
BORESIGHT M249/M60/240B
STABILIZE WEAPON ON TRI-POD AND TE
(CRUCIAL) ZERO BORELIGHT BORESIGHT AIMING POINT
WITH NVGs BORESIGHT ILLUMINATOR WITH NVGs (NARROW
BEAM)
40
Enabling Learning Objective E

• Action Zero the AN/PEQ-2A
• Conditions At night, given either an
  M16A1/A2/A4, M4 Carbine or MWS, AN/PEQ-2A, NVGs,
  25 meter range, ear plugs and 18 rounds of 5.56mm
  ammunition
• Standards Zero the AN/PEQ-2A to the selected
  weapon with less than 18 rounds

41
ZERO PROCEDURES TARGET PREPARATION
42
ZERO PROCEDURES TARGET PREPARATION
43
ZERO PROCEDURES M16A1/2 AND M4 CARBINE
EXAMPLE
M4/M16A2 Bracket Assembly
TOP UP .5 / LEFT 1.5
NOTE RETIGHTEN AN/PEQ-2A AFTER INITIAL 3 ROUND
SHOT GROUP
44
ZERO PROCEDURES M16A4 and M4 MWS
EXAMPLE
EXAMPLE
INSIGHT
LEFT UP 3 / RIGHT 3
TOP UP .5 / LEFT 1.5
NOTE RETIGHTEN AFTER INITIAL 3 ROUND SHOT GROUP
45
ZERO PROCEDURES M16A4 and M4 MWS
EXAMPLE
EXAMPLE
PICATINNY
TOP DOWN .5 / LEFT 2
LEFT UP 2 / RIGHT 4.5
NOTE RETIGHTEN AFTER INITIAL 3 ROUND SHOT GROUP
46
ZERO PROCEDURES M249
INSIGHT
EXAMPLE
TOP UP 1.25 / LEFT 2
NOTE RETIGHTEN AFTER INITIAL 3 ROUND SHOT GROUP
47
ZERO PROCEDURES M249
PICATINNY
TOP DOWN .5 / LEFT 2
NOTE RETIGHTEN AFTER INITIAL 3 ROUND SHOT GROUP
48
ZERO PROCEDURES M240B
INSIGHT
TOP UP 6 / LEFT 1.7
NOTE RETIGHTEN AFTER INITIAL 3 ROUND SHOT GROUP
49
ZERO PROCEDURES M240B
PICATINNY
EXAMPLE
TOP DOWN 1.5 / RIGHT 2
NOTE RETIGHTEN AFTER INITIAL 3 ROUND SHOT GROUP
50
ZEROING PROCEDURES ADJUSTMENTS
AIMING POINT ELEVATION 11cm_at_25
METERS WINDAGE 11cm _at_25 METERS
ILLUMINATOR ELEVATION 11cm_at_25 METERS WINDAGE
11cm _at_25 METERS
Note Field zero the illuminator Dont field
zero aiming point
ALL WEAPONS
51
Enabling Learning Objective F

• Action Engage Targets with the AN/PEQ-2A
• Conditions Given a weapon, NVD, AN/PEQ-2A, 4 AA
  batteries, FF scenario (if applicable), ear
  plugs, magazines for the M-4 if applicable and
  ammunition for selected weapon
• Standards Shoot familiarization table with the
  AN/PEQ-2A

52
Engage Targets with theAN/PEQ-2A
FOUR FUNDAMENTALS 1. STEADY POSITION NO MORE
CHEEK TO STOCKWELD M249/240B POSITION
TO CONTROL GUN AND SEE TARGET 2. AIM CENTER
MASS 3. BREATH CONTROL NO CHANGE 4. TRIGGER
CONTROL NO CHANGE
53
SCANNINGIR DISCIPLINE WALKINGEQUIPMENT AND
POSITION
Engage Targets with the AN/PEQ-2A
54
(No Transcript)
55
Enabling Learning Objective G

• Action Qualify with the AN/PEQ-2A
• Conditions Given either an M16A1/A2, M4 Carbine,
  Modular weapon System, M249 SAW, M60 machinegun
  or M240B machine gun, night vision device (NVD),
  4AA batteries, ear plugs, AN/PEQ-2A
• Standards Qualify on transition range IAW TM
  11-5855-308-12P. M16A1/A2, M4 carbine and MWS
  at least 17 out of 40 to qualify M249, M260 and
  M240B at least 6 out of 11 to qualify

56
Qualify with the AN/PEQ-2A
M16A2/4, M4 AND MWS
FF2 - 50, 150 250 METER TARGETS SCANNING IR
DISCIPLINE WALKING EQUIPMENT POSITION
ADJUSTMENTS PRACTICE QUAL 50M 250M RECORD
QUAL 50M 250M
STANDARD 17-23, 24-34 AND 35-40 TO QUALIFY
57
M249
Qualify with the AN/PEQ-2A
FF 100 400 METER TARGETS SCANNING IR
DISCIPLINE WALKING EQUIPMENT POSITION
ADJUSTMENTS PRACTICE QUAL 100M 400M RECORD
QUAL 100M 400M
6 out of 11 TO QUALIFY

58
M240B
Qualify with the AN/PEQ-2A

FF 100 400 METER TARGETS SCANNING IR
DISCIPLINE WALKING EQUIPMENT POSITION
ADJUSTMENTS PRACTICE QUAL 100M 400M RECORD
QUAL 100M 400M
6 out of 11 TO QUALIFY
59
Practical Exercise

• WALK THROUGH
• PMCS
• MOUNTING PROCEDURES
• AN/PEQ-2A OPERATIONAL PROCEDURES

60
Terminal Learning Objective
1. CHARACTERISTICS 2. PMCS 3. PUT INTO
OPERATION 4. ZEROING PROCEDURES 5. FIRING
TABLES AND STANDARDS 6. PRACTICAL EXERCISE 7.
PERFORMANCE EVALUATION 8. WRITTEN TEST 9. FIELD
FIRE 10. PRACTICE QUAL. AND QUALIFICATION
61
AN/PEQ-2A SUMMARY
Check on Learning
Student Evaluation

Questions