MODULE 10 Smartboard - PowerPoint PPT Presentation

1 / 9
About This Presentation
Title:

MODULE 10 Smartboard

Description:

To display the Smartboard in an AMX Touch Panel Room, select the Desktop ... To clear the contents of the Smartboard, erase the board completely and then ... – PowerPoint PPT presentation

Number of Views:53
Avg rating:3.0/5.0
Slides: 10
Provided by: IRT91
Category:

less

Transcript and Presenter's Notes

Title: MODULE 10 Smartboard


1
MODULE 10Smartboard
  • Every IVC room has a Smartboard which enables the
    instructor to display hand written text to the
    Near and Far sites.

2
Module 10 SmartboardAMX Rooms
  • To display the Smartboard in an AMX Touch Panel
    Room, select the Desktop Computer icon from the
    Local Source Panel.

3
Module 10 Smartboard AMX Rooms
  • Open the Smart Tools Notebook software from the
    computer desktop (there is a shortcut to the
    Smart Tools Notebook software on the desktop)
  • Note If you do not open the Smartboard software
    first, text written on the Smartboard will NOT
    display on the monitors

4
Module 10 Smartboard AMX Rooms
  • After the software has been opened, text and
    graphics which are handwritten on the Smartboard
    will be displayed at the Local and Remote sites.

5
Module 10 Smartboard AMX Rooms
  • Hand written text can be converted to typed text
    and stored using the Smartboard software.
  • Highlight the text by dragging the pointer
    (arrow) over the text. Right click on the text
    and the letter A appears in the upper right
    corner of the text box.

6
Module 10 Smartboard AMX Rooms
  • (Cont.)
  • Double click on the letter A and the hand
    written text converts to computer generated typed
    text.
  • This typed text can be saved as lecture notes for
    future reference.

7
Module 10 Smartboard VTEL Rooms
  • To display Smartboard text from a VTEL room,
    touch anywhere on the board.
  • Write text.

8
Module 10 Smartboard AMX and VTEL Rooms
  • To clear the contents of the Smartboard, erase
    the board completely and then press the Clear
    Screen button located at bottom right corner of
    the Smartboard.

9
Module 10Smartboard
  • CONGRATULATIONS!
  • You have completed Module 10 Smartboard.
  • Take Quiz 10.
  • After submitting Quiz 10, you will have
    completed this workshop. Submit your course
    evaluation. Once your instructor has received the
    course evaluation and all the completed quizzes,
    you will be given 3 Professional Development
    Hours for this on-line course. If you have any
    questions, email your instructor at
    jholzkne_at_austincc.edu .
Write a Comment
User Comments (0)
About PowerShow.com