Thermal Modeling and Thermal Vacuum Tests at NSPO - PowerPoint PPT Presentation

1 / 11
About This Presentation
Title:

Thermal Modeling and Thermal Vacuum Tests at NSPO

Description:

... attended AMS TIM in person if he had no major dental surgery in the last moment. ... Asian countries with no charges: Puhket Island after Tsunami (12/28/2004) ... – PowerPoint PPT presentation

Number of Views:86
Avg rating:3.0/5.0
Slides: 12
Provided by: nspo5
Category:

less

Transcript and Presenter's Notes

Title: Thermal Modeling and Thermal Vacuum Tests at NSPO


1
Thermal Modeling and Thermal Vacuum Tests at NSPO
  • Presented by
  • Jih-Run (J.R.) Tsai
  • National Space Program Office
  • January 2005

2

Outline
  • Introduction to NSPO
  • Thermal Modeling and Thermal Vacuum Tests
  • Summary

3

Introduction to NSPO
  • NSPO (National Space Program Office) is the only
    space organization in Taiwan.
  • Established by the National Science Council (NSC)
    of the Executive Yuan in October 1991.
  • Transformed to Non-Profit Organization in June
    2003.
  • Dr. Lance Wu becomes NSPO Director General from
    July 2004 to lead NSPOs second-phase space
    programs (20042018) for
  • Small Satellite Integration and development
  • Space science research
  • Advancing space technology
  • Promoting industry entrepreneurship

Note Dr. Lance Wu would have attended AMS TIM in
person if he had no major dental surgery in the
last moment.
4

NSPOs Contribution to the World
  • Remote sensing pictures taken by FORMOSAT-2
    (ROCSAT-2) supplied to the Southeast Asian
    countries with no charges Puhket Island after
    Tsunami (12/28/2004)

5

Thermal Modeling and TVT Test Background
  • To conduct thermal vacuum tests (with thermal
    balance test for QM only) for 37 QM and FM
    electronics crates/ XPD and thermal model
    correlation of QM crates and XPD at NSPO

Electronic Units Mounted on Radiators
6

Thermal Modeling and TVT Test Test Schedules
Sep 2005
Sep 2002
Dec 2003
Jun 2005
QM J (completed)
QM T/TPD QM U/UPD FM J/JT/JPD FS J/JT/JPD UPS
(under discussion)
QM J/JT/JPD (completed)
FORMOSAT-3 (ROCSAT-3) launch preps. flight
operation
NSPO TV Test Facility
7
Thermal Modeling and TVT Test - 1st TV / TB
Test (QM J Crate)
8
Thermal Modeling and TVT Test - Model
Correlation for 1st TV / TB Test (QM J Crate)
Transient Cool-down
Thermal model correlation for hot and cold
balance phases
Comparison between predicted temperatures and
test data at main wall
9
Thermal Modeling and TVT Test 2nd TV / TB
Test (QM J/JT/JPD)

10
Thermal Modeling and TVT Test Model
Correlation for 2nd TV / TB Test (QM J/JT/JPD)
QM J
QM JPD
JPMD
Transient Cool-down
Comparison between predicted temperatures and
test data at main wall
11

Summary
  • Two QM crate TV tests have been successfully
    conducted at NSPO because of
  • Excellent quality in mechanical, electrical, and
    thermal preparations at NSPO test facility
  • Complete test procedures strictly followed
    during testing
  • Good collaborations with CSIST, MIT, CGS, etc
  • Thermal correlations to the thermal balance test
    done for crate interface temperatures and thus
    crate thermal models corrected and verified
  • The future TV tests and corresponding thermal
    analyses will be performed based on good
    experience and collaboration in the past.
Write a Comment
User Comments (0)
About PowerShow.com