Title: United Nations Economic Commission for Europe
1- United NationsEconomic Commission for Europe
Monitoring of Radiologically Contaminated Scrap
Metal The United States Experience April 5-7,
2004 Geneva, Switzerland Prepared by Deborah
Kopsick, US EPA Ray Turner, David J. Joseph
Company S.Y. Chen, Argonne National Laboratory
2Why are We Here?
- Increased concerns among governments over
radioactive materials in scrap metal. - Hundreds of thousands of orphaned sources still
unaccounted for worldwide. - Increased scrap shipments across international
boundaries.
3Recent Developments Prompting Action
- Growing awareness of the potential for accidents
occurring (Better reporting? More demolition?
Aging industry?). - Some accidents have serious, even fatal,
consequences, often to the public. - Growing awareness of problems with orphan
sources. - Potential exists for orphan sources to become
Radiation Dispersal Devices (RDDs). - Increase in international shipments of scrap
metal.
4The Initiative Focuses on Protecting Commerce But
Also Overlaps with Other Existing Initiatives
5Overview of U.S. Radiation Control Border
Programs
- The U.S. has taken a very aggressive approach to
monitoring for unwanted radioactive material in
imported goods. - By September 2004, 90 of all seaports will have
radiation monitoring for all incoming container
cargo - 361 sea and river ports,
- Several million cargo containers a year,
- Previously only 3 were monitored by hand.
- 248 portal monitors in use at land border
crossings with Canada and Mexico. - Currently, scrap metal is only monitored at 3
seaports.
6Goals for This Meeting
- Share information on USEPA/US Customs Seaport
Monitoring Pilot Project. - Learn from other nations, experiences in scrap
metal radiation monitoring. - Discuss issues identified in UNECE Questionnaire,
identifying areas of international consensus, as
well as areas where additional examination is
necessary. - Is it possible to develop an internationally
acceptable scrap metal radiation monitoring and
response protocol?
7US EPA/Customs Seaport Pilot Project
- Established before 9/11 attacks to monitor scrap
metal imported into the U.S. for radioactive
material. - Pilot established in New Orleans, Louisiana, U.S.
in August 2001, later expanded to Charleston,
South Carolina. - Pilot project focused on monitoring imported
sea-going bulk cargoes of scrap metals. - More than 2,000,000 metric tons of scrap metal
monitored to date.
8Pilot Objective
- Study the issue of importing scrap metal
inadvertently contaminated with radiologically
contaminated materials - How much radioactive material is entering the
scrap metal supply from imported sources? - How effective are available monitoring technologie
s suitable to be used during the ship off-loading
process? - Can a protocol be developed that would allow
on-site dock personnel to operate the monitoring
equipment?
9Anticipated Project Outcomes
- Collect data to understand the scope of how much
unwanted radioactive material is entering the
U.S. through imported scrap metal. - Initiate development of U.S. monitoring standards
modeled after accepted international monitoring
protocols.
10Operations Protocol
Shipment of scrap metal enters the port for
offloading
Scrap metal is off-loaded from ship with
grapples equipped with radiation detectors
USEPA representativewith hand-held
radiationdetector surveyssuspect material
Segregatesuspectmaterial
Yes
Radiationalarm occurs
No
Shipmentproceeds
Notify the State, whichwill follow its
normalnotification andresponse procedures
Find sourceand isolate
USEPAcollects data
Rest ofshipment proceeds
Buyer works with sellerto dispose of
contaminatedmaterial with state andfederal
oversight
11Grapple Monitor Testing Protocol
- Oak Ridge National Laboratory (ORNL)
- Review and analyze field observed problems
- Develop an effective routine performance range
- Develop a field testing protocol
- Quality Control Tracking
- Radiation sensitivity estimation
- Theoretical, laboratory, and field technical
support
Chiaro, Peter, ORNL, 2004
12Results
- The monitors, procedures, and protocols used
provide a framework for future efforts to detect,
identify, and isolate radioactive materials in
scrap metal. - The monitors can be operated and maintained by
on-site dock personnel. - The detection system provides assurance against
the importing of contaminated scrap metal, based
on field, laboratory, and theoretical testing.
13Accomplishments
- 10 Detection systems installed and tested
- Equipment
- Protocols
- Training
- Monitored more than 300,000 tons of scrap thus
far in Darrow, Louisiana - Data collected
- System worked/system issues identified and
corrected - System operating procedures validated
- Modeled detection capabilities
- Expanded to Charleston, South Carolina, in 2003
- Monitored more than 1.7 million tons in
Charleston in 12 months
14Next Steps for the Pilot Study
- Continue to collect data and monitor ports for
imported radioactive metals. - Expect to expand to other seaports.
- Work with the international community to collect
data to determine the extent that importing
contaminated metals is a problem and steps other
countries are taking to prevent this problem. - Determine need for additional EPA action.
15Discussion of RadiationMonitoring Capabilities
16Issues with Land Scrap Metal Monitoring Systems
- Different types of detectors will allow detection
of different types of radiation. - The location of the detector is critical to
successful detection. - The location of the source within the scrap load
(amount of shielding) will determine if it can be
detected.
17Radiation Monitors May Be Limited in Their
Capabilities
Even the best systems do not always detect a
source that could cause a multimillion dollar
cleanup!
- Sodium Iodide Does not detect neutrons
- High stopping power
- Good for handheld devices
- Large area detectors impractical costly
- Plastic Scintillator Does detect neutrons
- Moderate stopping power
- Good for hand-held devices and fixed monitors
- Large area detectors practical
18Self-Shielding of Scrap Hinders Detection
Capability
Vehicle Count Rate for a Truck Shipment
19The Detection Capability Increases with Large
Area Detectors
Small Areas Detector misses radiation
Truck filled with scrap
Large area detector picks up radiation
Typically have 18 to 24 spread
Lamastra, A. 2003
201996 SMA Test (Side Detectors) Shows Detection
Is Highly Dependent on Scrap Thickness
- Detection category
- Easy ( ? 6 Shred)
- Moderate (7-13 Shred)
- Hard (14-16 Shred)
- Very Hard (17-19 Shred)
- Extremely Hard (20-22 Shred)
- Almost Impossible ( gt 22 Shred)
Overall percentage 100 100 84 69 6 0
Lamastra, A, 1998
21Location and Type of Monitoring Can Also Affect
Detectability
- Monitoring location will impact system
sensitivity, and the production and ease of
returning scrap to the owner. - Scale or plant entrance fixed monitors
- Conveyor monitors
- Charge bucket monitors
- Grapple monitors
- Dust monitors (too late to prevent)
- The smaller the amount of scrap monitored, the
better the chances of detecting the radiation
source.
22Waste Disposition A US EPA Source Roundup
Program Offers A Viable Option
- Round-up of known discreet orphan sources in 1
state. - 36 - 137Cesium sources were returned to the
manufacturer. - Successful, inexpensive pilot, which led to
nationwide, federally funded orphan source
program available to states.
23Path Forward
- International trade can bring opportunities as
well as problems. - Effective regulations and guidance are needed to
ensure that the public and industry are protected
and that international commerce is not adversely
affected. - Monitoring systems and protocols need to be
established, communicated, and implemented
internationally.
24United States Contacts
- International contact
- Debbie Kopsick
- Kopsick.deborah_at_epa.gov 202-343-9238
- Consultants
- S.Y. Chen, Ph.D.
- SYCHEN_at_anl.gov 630-252-7695
- Ray Turner
- RT_at_rmrecycling.com 513-703-0981