Title: Building a Visual Model for Equations and Polynomials
1Building a Visual Model for Equations and
Polynomials
- Jim Rahn
- LL Teach, Inc
- www.llteach.com
- www.jamesrahn.com
- james.rahn_at_verizon.net
2- Place the following tiles on your table. What
does each represent? - 1 green rectangle, 2 yellow squares, and 3 small
red squares - 2 red rectangles, 1 yellow small square, 2 red
small squares, and 3 green rectangles - 4 green rectangles, 2 red rectangles, 1 yellow
small square, and 2 red small squares - 2 Blue square, 1 red rectangle, 3 yellow small
squares, 2 green rectangles, 1 red small square
3- Represent each of the following and then have
simplify the expressions
4- Write down what pieces you would use to represent
the following expression without building the
picture and then describe your final answer.
5Adding expressions together
- First place expression one on the board. Then add
to this board the expression two. What is the
results?
6Now try to add these expressions by just
describing the tiles you would use
7Now try to subtract
- First place expression one on the board. Then
try to remove or subtract expression two from the
board. (Hint You might need some zero pairs to
do this.)
8- Now try to subtract these expressions without
using the tiles. Just describe what you would do
9Solving Equations with Algebra Models
- Set this picture up on your equation balance. By
doing the same step to both sides of the
equation, try to get the green rectangle by
itself. - What does one green rectangle equal? Describe
your steps. - Is there another set of steps you could use to
find the value of one green rectangle? - Does the value of the green rectangle make sense?
10- Set up this new picture and again solve for the
value of the green tile. - Is there more than one set of steps that you can
use to find the value of the green rectangle? - Does your answer make sense?
11- Set up this new picture and again solve for the
value of the green tile. - Is there more than one set of steps that you can
use to find the value of the green rectangle? - Does your answer make sense?
12(No Transcript)
13(No Transcript)
14- Use the algebra models to represent x 3 4 on
the equation balance. - Find the value of x by doing the same thing to
both sides of the balance until you have the x
(green rectangle) by itself. - Does this value make sense?
15- Use the algebra models to represent 2x4 8.
- Find the value of x by doing the same thing to
both sides of the balance until you have the x
(green rectangle) by itself. - Does this value make sense?
16- Use the algebra models to represent
-
- on the equation balance.
- Find the value of x by doing the same thing to
both sides of the balance until you have the x
(green rectangle) by itself. - Does this value make sense?
17- Use the algebra models to represent
- on the equation balance.
- Find the value of x by doing the same thing to
both sides of the balance until you have the x
(green rectangle) by itself. - Does this value make sense?
18- Use the algebra models to represent
- on the equation balance.
- Find the value of x by doing the same thing to
both sides of the balance until you have the x
(green rectangle) by itself. - Does this value make sense?
19- Use the algebra models to represent
- on the equation balance.
- Find the value of x by doing the same thing to
both sides of the balance until you have the x
(green rectangle) by itself. - Does this value make sense?
20- Use the algebra models to represent
- on the equation balance.
- Find the value of x by doing the same thing to
both sides of the balance until you have the x
(green rectangle) by itself. - Does this value make sense?
21- Use the algebra models to represent
- on the equation balance.
- Find the value of x by doing the same thing to
both sides of the balance until you have the x
(green rectangle) by itself. - Does this value make sense?
22Visualizing Multiplication with base 10 tiles
- Suppose we want to multiply 13 x 12.
23Multiplication with Algebra Tiles
- We will use the rectangle to represent
multiplication - Show 2x 1 with tiles.
- Show 2(x 1) with tiles.
- Arrange the shapes in a rectangle.
- What is the rectangles length?
- What is the rectangles width?
- What is the rectangles area?
24- Show 3x2 - x with tiles.
- Show 3(x2 - x) with tiles.
- How are the two pictures for 3x2 - x and 3(x2 -
x) different? - How are they the same?
25Setting Up a Multiplication Rectangle
- Along the outside we will place our factors to
multiply. - Fill in the rectangle with appropriate pieces.
26- Use the rectangular model to multiply x 1 by x
2. Set up the dimensions along the top and the
side. Then build the rectangle that has those
dimensions.
27- What new piece did you use in the multiplication?
- How many different size pieces do you have in
your rectangle? - What is the name for each of these pieces?
- How many of each size piece do you have?
- What is the simplified answer for the
multiplication of (x 1)(x 2)?
28- (x2)(x3)
- Set up the dimensions x2 and x 3 along the top
and the side. - Build the rectangle with those dimensions.
- How many different size pieces do you have in
your rectangle? - What is the name for each of these pieces?
- How many of each size piece do you have?
- What is the simplified answer for the
multiplication of (x 2)(x 3)?
29Set up these multiplications
- Do you see any patterns?
- Can you predict how many x2 pieces will be in
your answer? - Can you predict how many x pieces will be in your
answer? - Can you predict how many units will be in your
answer?
- (x3)(x1)
- (x2)(x5)
- (x2)(x4)
30Multiply these binomials
- Do you see any patterns?
- Can you predict how many x2 pieces will be in
your answer? - Can you predict how many x pieces will be in your
answer? - Can you predict how many units will be in your
answer?
- (2x3)(x2)
- (x2)(3x5)
- (2x1)(x4)
31Can you multiply these binomials together without
the tiles?
- Think about the rectangle and what pieces will
fit on the outside and what pieces will fit on
the inside. - (x1)(x4)
- (x7)(x5)
- (2x1)(x7)
32Lets Try Negative Numbers
- Think about the rectangle and what pieces will
fit on the outside and what pieces will fit on
the inside. - (x-2)(x2)
33Can you multiply these binomials together without
the tiles?
- Think about the rectangle and what pieces will
fit on the outside and what pieces will fit on
the inside. - (2x-1)(2x1)
- (x-3)(x3)
- (1-x)(1x)
- (1-2x)(12x)
34Multiply these
35Try some of these
- (3x2)(x-2)
- (2x1)(x-4)
- (1-x)(2x)
36How did Algebra Tiles Help You?
- Do you have a visual understanding for addition,
subtraction, and multiplication of signed
numbers? - Do you have a visual understand for terms like 1,
2x, and 3x2? - Do you have a visual understanding for combining
like terms? - Do you have a visual understanding for adding or
subtracting algebraic expressions? - Do you have an understanding for importance of
zero pairs?
37How did Algebra Tiles Help You?
- Do you have a visual image to connect (x3)(x2)
with? - Do you understand that (x3)(x2) will involve 4
multiplications? - Will (x3)(x2) have any zero pairs to combine?
- Will (x-3)(x2) have any zero pairs to combine?
38Building a Visual Model for Equations and
Polynomials
- Jim Rahn
- LL Teach, Inc
- www.llteach.com
- www.jamesrahn.com
- james.rahn_at_verizon.net