Title: PPB1 Aula 05 30/08/05 Percep o, reconhecimento de objetos e const ncia perceptiva Author: GG Last modified by: G Created Date: 8/22/2005 9:30:30 PM
LMT harness B4. LMT harness B6. Boards or plates similar to. heat spreader plates. Fixation to ... sides of box) PPTest. connectors. barrels. Four barrel ...
It provides pads for soldering of the low mass tapes to the ... HV leakage current and line solder joint resistance were measured before and after aging ...
Latest Fuse Box Design. 1 type of fuse box for each module type. Dimension: R x x Z ... Parts are being quoted for manufacture, expect to start production .
Analog yield under study. FE-D2S good ... to sample fab process and allow continuous running of foundry. ... Senior Tech) Pixel Detector Semiconductor Tracker(SCT ...
Planning for type ii/iii. Fibre installation dates. PS installation plan ... Tony strongly resists any testing to avoid spoiling the heavy duty rigging we paid for ...
Silicon Subsystem M. G. D. Gilchriese Deliverables - Goals 1.1.1 Pixel System(Preliminary) 1.1.1.1 Mechanics - design, assemble and install disk system and out er ...
Use Minglee's simple cheap BER test system to test 4 harnesses in parallel. ... and found resonances around 15 kHz ( photos). T. Weidberg. SCT-SG July '03 ...
... connection of drain wire and foil to clamp on order. 4 April ... Will add metal braid for a reliable connection of the foil to the clamp by the top layer ...
Cables production resumed last week (KontaktSysteme) 20 80 doubles ... This course is composed of 4 modules : Cryogeny, Evacuation, Installation and Magnet. ...
8 June 2006. A.Ciocio - SCTSG. 1. SCT Services. Installation. Type IV. PP3 ... wires in a ferrule and catch the ferrule with the grub screws into clamp's holes ...
Installation of the harnesses as single cable (246) almost one rack on level 1 completed ... New Plan. Marzio helped finding a company to do the work ...
... were by mistake ordered without any contingency (normally 7 meters in addition) ... the cable tray routing in USA 15 (to make the fibre cable path a bit shorter) ...
After the first cable is installed, 8 more cables will be cut, labeled and ... The first FSI tube is going to be bent, cut and installed this week by the technicians. ...