Title: CEE%20795%20Water%20Resources%20Modeling%20and%20GIS
1CEE 795Water Resources Modeling and GIS
Lecture 6 Flow Networks in GIS (ArcHydro) (some
material from Dr. David Maidment, University of
Texas, Dr. David Tarboton, Utah State
University, and Dr. Franciso Olivera) February
22, 2006
- Learning Objectives
- Describe a Network model
- Identify Flow in a network model
- Develop a hydrologic network
- Perform linear referencing on networks
Handouts
Assignments Exercise 5
2Hydro Networks in GIS
- Network model
- Flow on Networks
- Hydrologic networks
- Linear referencing on networks
Some slides in this presentation were prepared by
Dr Francisco Olivera
3National Hydrography Dataset
Key feature classes
Five feature classes with NHDFLowline built
into A geometric network
NHDPoint, NHDLine, NHDArea are point, line and
area water features on map apart from
flowlines and waterbodies
4National Hydrography Dataset
5NHD Waterbody
6NHD Geometric Network
7Arc Hydro Framework Input Data
Watersheds
Waterbody
Streams
Hydro Points
8Arc Hydro Framework Data Model
9Arc Hydro Framework For South Florida
Basins
Waterbody (NHD)
Hydro Points
Hydro Network (NHD)
10Network Definition
- A network is a set of edges and junctions that
are topologically connected to each other.
11Network Model in GIS
- Three components
- Geometric model (x,y,z,m) coordinates of edges
and junctions - Logical model which edges are connected to what
junctions - Addressing model location on the network using
measure
12Edges and Junctions
- Simple feature classes points and lines
- Network feature classes junctions and edges
- Edges can be
- Simple one attribute record for a single edge
- Complex one attribute record for several edges
in a linear sequence - A single edge cannot be branched
No!!
13Polylines and Edges
14Junctions
- Junctions exist at all points where edges join
- If necessary they are added during network
building (generic junctions) - Junctions can be placed on the interior of an
edge e.g. stream gage - Any number of point feature classes can be built
into junctions on a single network
15Connectivity Table
p. 132 of Modeling our World
J125
Junction
Adjacent Junction and Edge
J123 J124, E1
J124 J123, E1 J125, E2 J126, E3
J125 J124, E2
J126 J124, E3
E2
J124
E3
E1
J123
J126
This is the Logical Network
16Build Network Tables
- Establishes connectivity of Edge and Junction
features - Enables tracing
- Generates Generic Junctions
Geometric Network Wizard in ArcCatalog
17Snapping Features
18Network Sources and Sinks
Each junction feature class in a network can
have junctions which are sources or sinks for
flow
19Flow to a sink
20Flags
21Trace Solvers
22Upstream Trace Solvers
23Flow Line
Traces movement of water in a one-dimensional
flow system
24Location of the Flowline
25Introduction to the Hydro Network
- Hydro Edge think of Arc
- Hydro Junction think of Node
- Waterbody think of Polygon
26Flow Network
A connected set of flow edges
27Hydro Network for Holland
28Guadalupe Basin Framework Dataset
29Network Tracing on the Guadalupe Basin
30Schematic Network
31Connecting Waterbodies using Relationships
32Hydro Network through Canyon Lake
33Linking Canyon Lake to the Network
34Connecting Drainage Areas using Relationships
35Connecting Drainage Areas to the Network
Area goes to point on line
36Linear Referencing
Where are we on a line?
37My Streams are really long
Use ReachID to link many Hydro Edges together
into one River
38Addressing
39Coordinates of a 2-D Polyline
40Coordinates of a 2-D Polyline M
41Setting Line Measure
42Proportional Aliasing
Distance is measured Relative to the length of
the line as a percentage 0 100
43Setting Percent Measure
pMSeg.SetAndInterpolate MsBetween 0, 100
pMSeg.SetAndInterpolate MsBetween 100, 0
0 100 going downstream
0 100 going upstream
44Distances from Upper End in Meters
450
Percent distance from bottom end of reach
100
46Measure in kilometers
Measure in km from bottom end of line (like river
miles or Kilometers)
pMSeg.SetAndInterpolateMsBetween 0,
(Shape_Length /1000)
47Point and Line Events
48Displaying Events